Concrete recessed spotlights

This selection is also available in our French store: Spots encastrables en béton

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right light output?
Allow about 100 to 300 lumens per m²: about 150 lm/m² for a living room, about 350 for a kitchen. Each product page lists the lumens.
At what height should the light be installed?
Above a table: 70-85 cm from the tabletop; in a walkway: at least 2.10 m of clearance below the bulb.
What type of bulb?
Usually E27 or E14, sometimes GU10. Specified on each product page.
Compatible with LEDs and dimmers?
Yes, in most cases; for use with a dimmer, look for the “dimmable” mention.
Concrete recessed spotlights
Designix · Design lighting

Light changes everything

From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

First check the available thickness in your substrate and the space behind the spotlight: that is what decides the model, not the colour of the trim. A concrete recessed spotlight is chosen on three measurable criteria: the depth of the housing, the cut-out diameter and water drainage when it is installed at floor level.

What are the different types of recessed spotlights?

A recessed spotlight is first distinguished by its destination: ceiling, floor or wall, indoors as well as outdoors. Then come the body material, fixed or adjustable mounting and the recessing method, in a suspended ceiling or in a recess formed in the concrete.

Concrete recessed ceiling spotlight

In a slab, the spotlight sits in a recess cast with the substrate. The result is flush: only the trim remains visible, the ceiling keeps its flatness and the light grazes along the surface. This clean result is what appeals in a living room or a hallway, and it is also what makes it necessary to stop the installation before pouring. If you are hesitating between several models, compare them in adjustable recessed spotlights, whose beam can be set after installation.

Concrete recessed outdoor spotlight

On a terrace, a path or at the edge of a planted bed, the spotlight acts as a low-level marker: it outlines a route without lighting towards the sky. Two criteria then take priority over aesthetics: the ingress protection rating against water and dust, and water drainage beneath the housing. Concrete retains moisture, electronics do not. For a complete outdoor installation, look at recessed outdoor spotlights or their LED version for terraces.

Which concrete recessed spotlight for which location
Location Spotlight type Points to check Expected result
Living room ceiling Recessed fixed or adjustable Housing depth, cut-out diameter, trim finish Clean ceiling, grazing and even light
Kitchen ceiling Recessed adjustable above the worktop Beam opening, easy cleaning Lit worktop without cast shadow
Covered terrace Ceiling recessed with protected body Ingress protection, humidity, condensation Discreet light, no glare
Terrace or path floor Recessed in the floor Water drainage, resistance to foot traffic Low markers, readable route
Concrete wall or step Recessed wall spotlight Substrate thickness, fixing method Niche effect, indirect light

How do you install recessed spotlights in a ceiling?

First mark the position, check that no conduit or beam passes where you will drill, then drill to the diameter of the spotlight or its housing. The spotlight is wired before being pushed back into its housing, trim flush, and is secured by springs or screws depending on the model.

What depth is needed for a recessed spotlight?

The housing must contain the spotlight body and the connection, without cutting into the slab reinforcement. Allow a little clearance behind the body to fold the cable without pinching it, because a compressed connector heats up. The exact depth is given on the model's data sheet: it varies with the base, a spotlight with a socket sitting deeper than an integrated LED.

What cut-out diameter for a recessed spotlight?

The cut-out diameter is specific to each model and sometimes to each housing. Note the value on the data sheet, measure the body with a caliper, then transfer it to the hole saw. A test in an offcut takes two minutes and avoids a hole that is too large and impossible to fix. A steel or aluminium spotlight is installed the same way, see metal spotlights for the finishes.

Is it possible to install spotlights without a suspended ceiling?

Yes, provided there is a recess in the material: a concrete slab or solid ceiling takes a housing cast in place, or core-drilled afterwards. Without a suspended ceiling or a recess, only a surface-mounted spotlight or a low-depth model remains possible.

How do you recess a spotlight into a solid slab ceiling?

There are two stages. Before pouring, a housing or sleeve is cast in at the planned location, and the spotlight is fitted into it later. Afterwards, the slab is core-drilled with a water-cooled core drill, then the edge of the hole is neatly sealed. Core drilling requires suitable equipment and careful location of the reinforcement; a wide trim finish hides the concrete repair. For a ceiling that is already finished, take a look at spotlights with a crafted design.

What should you do if your recessed spotlight does not hold?

A spotlight that slips almost always has a hole too large for its springs. You can tighten the clips, add a wider trim that bears on the surface, or switch to a screw-fixed model. If the substrate is uneven, a surface-mounted recessing box restores a clean seating without reworking the slab. White finishes blend well into a repainted ceiling.

How should spotlights be laid out on a ceiling?

Draw the layout before drilling: an even line along the walls or furniture, closer points above the areas in use and a constant spacing between two spotlights. Even distances matter more than the number of points for achieving uniform light.

What distance between two recessed spotlights?

There is no universal figure: it depends on the ceiling height and the beam opening. The trade rule of thumb is to make the light cones overlap slightly, to avoid dark areas between two points. The higher the ceiling, the wider the spacing, for an equivalent beam. Draw in pencil, check by eye from the doorway, then drill.

How do you place spotlights in a long room or a hallway?

In a hallway, a continuous line along the direction of travel guides the step and avoids patches of light on the walls. If the hallway is narrow, a single line is enough; if it is wide, two parallel lines keep the result symmetrical. Hallway spotlights favour fixed, understated models, whereas a living room better tolerates an adjustable beam, as in living room spotlights.

How many spotlights in a kitchen?

The number of spotlights in a kitchen is decided zone by zone: worktop, sink, hob, circulation. The points are distributed above the work surfaces rather than in the centre of the room, and adjusted according to the size of the units and the light already provided by the window.

Where should spotlights be placed above the worktop?

The useful point is above the worktop, not behind the person cooking: otherwise the body's shadow falls on the chopping board. An adjustable beam lets you aim at the board and correct the setting after installation. Avoid placing a spotlight directly in front of the eyes when working seated. Details of the models can be found in recessed kitchen spotlights.

Should the kitchen floor be lit?

Rarely from the ceiling, often at the bottom of units or in a skirting. A floor-recessed spotlight in a kitchen serves to mark a passage at night, but it glares if badly aimed and makes cleaning harder. If you are looking for soft, dimmable light in the evening, compare LED models for kitchens and dimmable spotlights.

How do you wire spotlights in series or in parallel?

A series connection makes the same current pass through each spotlight: if one fails, the circuit opens. In parallel, each spotlight receives the same voltage and remains independent, which is why this is the arrangement used for domestic lighting circuits.

How do you wire spotlights in series?

You run from the output of one spotlight to the input of the next, in a loop. Each point adds its voltage drop, which weakens the whole and makes the fault hard to locate. This wiring is reserved for special cases and should be validated with an electrician. Connections are always made with the power off, the box open and the terminal blocks checked one by one.

How many spotlights can be put on one circuit?

Add up the spotlight wattages, then compare the total with what the circuit and its protection accept, a figure shown on the consumer unit and to be validated by a professional. No figure can be transferred from one installation to another. To modulate the intensity without multiplying the points, see adjustable dimmable LED models.

Series or parallel connection for spotlights
Point of comparison Series connection Parallel connection
Failure of one spotlight The whole circuit goes out The other spotlights keep working
Voltage received Shared between the points Identical for each point
Wiring Loop from one spotlight to the next Runs to each spotlight from the box
Common use Rare in domestic lighting Lighting circuit for a room

What mistakes should you avoid before drilling into a concrete slab?

Three mistakes come up repeatedly: drilling without locating conduits and reinforcement, choosing a spotlight too deep for the slab, and forgetting water drainage when the spotlight is installed at floor level outdoors. Locating and a dry run avoid having to rework the slab.

How do you locate conduits before drilling into a slab?

Take out the as-built drawing of the services, then run a detector over the whole area, not just at the marked point. Probe gently with a fine drill bit before using the hole saw. If any doubt remains about a section, move the point a few centimetres: a shifted spotlight is not noticeable, a pierced conduit is immediately.

How do you drain water beneath a floor-recessed spotlight?

A terrace spotlight is installed on a bed of draining gravel, with a slight perimeter joint and never in a hollow that retains water. The cable entry is siliconed, the housing remains accessible. That is the whole difference from a living room spotlight, where only dust matters. See adjustable outdoor spotlights and the gold version for a dark facade.

Before ordering, check the available depth, the cut-out diameter of your hole saw and the ingress protection if the spotlight is going outdoors. Secure payment, tracked delivery, returns and the Designix customer service accompany every order, and the team answers questions on choosing a model as well as on dimmer compatibility. Also compare the black finish and adjustable LED models.

Frequently asked questions about concrete recessed spotlights

What size of hole saw for a spotlight?

The hole saw must match exactly the cut-out diameter specified for the spotlight, which varies from one model to another and sometimes from one housing to another. Note the value on the product data sheet, measure the spotlight body, then do a test in an offcut before attacking the slab.

How many spotlights should be installed for 50 m2?

No single figure holds: it all depends on the ceiling height, the spotlight beam, the areas actually used and the natural light. Work by areas to be lit and by even spacing, then adjust on the plan before drilling.

Can a concrete recessed spotlight stay outdoors all year round?

An outdoor spotlight is chosen on two points: an ingress protection rating suited to water and dust, and water drainage beneath the housing. Concrete holds moisture, electronics and connections do not: the sealing of the installation decides how well it lasts.

How do you wire spotlights in series?

You connect the next spotlight to the output of the previous one, so that the same current passes through the whole loop. If one spotlight or connection fails, the whole set goes out. This arrangement is reserved for special cases and should be validated with an electrician, with the power off.

Can a recessed spotlight be installed in a concrete wall or step?

Yes, provided the thickness of the substrate allows the spotlight body and its connection to be housed. Work is done by core drilling or by forming a recess, with a trim finish that protects the edge of the concrete. The sealing of the cable entry matters as much as the drilling.

Our advice for choosing
This collection brings together recessed concrete spotlights for solid slabs, terraces and mineral floors, where no hollow ceiling exists. You will find fixed or adjustable models, recessed into a housing, for both indoor and outdoor lighting.