LED strip lights
This selection is also available in our French store: Réglettes LED
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
No products in this selection.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?
An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Start by measuring the length of the run to be lit, then check the available power supply and the protection level required by the environment: that is the order in which to choose LED strip lights. Mounted under a cabinet, on a garage ceiling or along a wall, they replace a single light source with light spread over the entire length.
Contents
- Use and rooms
- How to choose
- Power supply
- Water resistance and IP65
- Motion sensor
- LED strip or ceiling light
- Mounting and care
- Budget and ordering
What are LED strip lights for and which rooms suit them?
LED strip lights illuminate in a line: mounted under a cabinet, on a garage ceiling or along a wall, they replace a single source with light spread over the length. Choose them according to the room, the available length and the required level of protection.
Kitchen LED strip lights
Placed under wall cabinets and slightly set back from the wall, the strip lights the worktop without casting the shadow of your hands on the chopping board. A length close to that of the worktop is enough: any longer and it spills into the room without purpose. The aim is not to light the whole kitchen, but to make what you are preparing clearly visible.
Garage and workshop LED strip lights
On the ceiling, above the workbench or along a wall, the light follows the work area instead of concentrating on one point. Garage LED strip lights are made for this. For a damp room, waterproof models take over and can be wiped down without worry.
How to choose LED strip lights?
Choose LED strip lights by starting with the length to cover, then the available power supply and the installation environment: dry, damp or dusty. Check the possible mounting, the light colour and whether a switch or sensor is built in.
60 cm and 90 cm LED strip lights
These lengths are for supplementary lighting: under a cabinet, in a cupboard, above a shelf or along a short hallway. Before buying, measure the actual location and trace the cable route to the socket, because that often determines the useful length.
120 cm and 150 cm LED strip lights
On a long worktop, a garage entry or a run of storage, these sizes cover an area in one piece. A 220V LED strip light remains the most consistent solution there, provided an electrical point is available nearby.
| Length | Typical use | What to check before buying |
|---|---|---|
| 60 cm | Under a kitchen cabinet, a cupboard, a shelf | Available length and cable route |
| 90 cm | Short worktop, hallway, bathroom cabinet | Mounting on cabinet or wall, nearby switch |
| 120 cm | Long worktop, garage entry, workshop | Mains power and protection suited to the environment |
| 150 cm | Large kitchen, garage, workshop, run of storage | Beam width and number of light points |
220V, rechargeable or wireless LED strip lights: which power supply to choose?
A 220V LED strip light plugs into the mains and stays fixed, while a rechargeable or wireless model goes where no socket reaches and is recharged as needed. The mains-powered model with a motion sensor combines a fixed supply with automatic switch-on when you pass.
Rechargeable wireless LED strip lights
They go in a cupboard, a cellar, a rented flat, anywhere running a cable would be disproportionate. The trade-off is simple: you have to remember to recharge the battery. If use is daily and prolonged, a fixed supply is better. Find these versions among the rechargeable wireless LED strip lights.
Plug-in 220V LED strip lights
Plugged into a socket or a switch, they deliver constant light with no battery maintenance. This is the logical choice for a kitchen, a workshop or a cellar lit every day. On walkways, mains-powered motion detection removes the need for a switch, with an adjustable delay depending on the model.
Waterproof or IP65 LED strip lights: which protection to choose?
In a bathroom, a utility room, a garage or a workshop, moisture and dust damage an unprotected strip. A waterproof or IP65 strip resists splashes and is easier to clean. In a dry room, a standard model is enough.
The protection rating is read in two digits: the first covers solid bodies and dust, the second water. In a wet room, aiming for reinforced protection against splashes is the usual benchmark. IP65 LED strip lights are designed for these environments, and the range dedicated to damp room lighting also covers utility rooms and washable garages. Light colour matters as much as the rating: around 3000 K the light stays warm and suits a bathroom; towards 4000 K it becomes more neutral for a workshop.
Motion sensor LED strip lights: what are they for?
A motion sensor LED strip light switches on by itself when you enter the room and off after you leave. It is useful in a hallway, on a staircase, in a cupboard, a garage or a cellar, anywhere you do not want to search for the switch with your hands full.
Motion sensor LED strip lights
Walking in with a box in your arms, crossing a hallway at night, going down to the cellar without fumbling: the light triggers as you pass. Motion sensor strip lights are chosen according to the area covered and the switch-off time after you leave.
220V motion sensor LED strip lights
Mains-powered, they depend on no recharge and keep the same brightness over time. This is the version to favour for automatic lighting in walkways used every day, such as a staircase or a garage entry.
LED strip light or LED ceiling light: which solution to light a room?
An LED ceiling light, a chandelier or a wall light illuminate from a fixed point, while an LED strip light spreads light over a whole length. For a worktop, a garage aisle or a run of cupboards, the strip is more suitable; to light a whole room, keep a central point.
LED ceiling light or chandelier in the centre of the living room
In a living room or dining room, the central point remains the basis of general lighting. Strip and ceiling light are therefore not opposed: the latter sets the ambient level, the former highlights a worktop or a bookcase. Browse the Designix lighting catalogue to see both approaches side by side.
LED wall light and strip on the same wall
An LED wall light illuminates a specific point, at the head of a bed or in a narrow hallway. On the same wall, it can accompany a strip without replacing it, provided you avoid two different colour temperatures. The usual benchmark is to stay in the same family, around 3000 K for living rooms. To compare with other light fittings, first look at the surface to cover.
| Solution | Type of light | Room where it suits |
|---|---|---|
| LED strip light | Linear light spread over a whole length | Kitchen, garage, workshop, bathroom, cupboard |
| LED ceiling light | Central light diffused downwards | Living room, bedroom, room to be lit entirely |
| LED wall light | Wall light, direct or indirect | Hallway, head of bed, entry, living room wall |
| LED chandelier | Decorative central light point | Dining room, large living room, entry |
How to mount and maintain an LED strip light?
An LED strip light is fixed with screws or clips to the surface, then connected to a socket, a switch or a sensor depending on the model. A soft cloth is enough for maintenance: avoid abrasive products, especially on the diffuser.
Mounting an LED strip light on the ceiling or under a cabinet
Under a cabinet, position the strip set back from the edge to avoid glare. On the ceiling of a workshop or garage, place it above work and traffic areas, aiming the beam downwards. Check the support before drilling: a kitchen cabinet does not take the same fixing as a concrete slab.
Cleaning and maintaining the diffuser of an LED strip light
Unplug before cleaning. A soft, slightly damp cloth removes dust and kitchen marks; abrasive products or solvents dull the diffuser and lose light. In a dusty environment, a model protected against splashes is quicker to clean and stays clean longer.
What budget to plan and how to order your LED strip light?
The budget for an LED strip light depends mainly on length, power supply, level of water resistance and whether a sensor is included. Affordable models cover supplementary lighting; waterproof or fully equipped versions move up the range. The current price is shown on each product page.
What makes the price of an LED strip light vary
A 150 cm length costs more than a 60 cm model, and reinforced protection weighs more than a standard finish. Add the motion sensor, built-in switch or a battery: these functions, more than length, separate a supplementary model from battery-powered supplementary lighting or a waterproof version. Choose the useful function, not the longest list.
Payment, delivery and returns at Designix
You order with secure payment, with tracked delivery and returns possible if the length does not suit once laid out dry. Designix customer service answers sizing questions before purchase, which avoids back-and-forth. For a damp room or a daily walkway, start with a IP65 waterproof version or a mains-powered strip, then adjust the length: that is the order that limits mistakes.
Frequently asked questions about LED strip lights
How to choose LED strip lights?
Start with the length to cover, then check the available power supply and the installation environment: dry, damp or dusty. Then look at the light colour, the mounting supplied and whether a switch or sensor is included. The level of protection decides last.
What length of LED strip light for a kitchen?
It depends on the length of the worktop to be lit: a strip covers the preparation area, not the whole room. It is placed under the wall cabinets, slightly set back to avoid glare, checking that the length remains compatible with the socket location.
Can an LED strip light be installed in a garage?
Yes, provided you choose a model suited to dust and moisture, and a length that lights both work and traffic areas. A waterproof strip, or one fitted with a motion sensor, avoids switching on manually every time you pass.
Is a wireless LED strip light bright enough?
It suits supplementary or proximity lighting: cupboard, cellar, cabinet, staircase. To light a worktop or a workshop durably, a 220V strip light remains more consistent, since it does not depend on a battery that needs regular recharging.
Where to install a waterproof LED strip light?
In rooms where water and dust are present: bathroom, utility room, garage, workshop. The protection rating indicates the product's level of resistance. In a dry room, a standard model is enough and remains more affordable.
