LED Spotlights

Choose the beam before the power: wide and diffuse for a yard or a garage, tighter for a facade or a driveway. Then you pick the power supply, then the control (switch, sensor, dimmer) and finally the protection rating suited to water exposure.

Which is the best LED flood light for the home?

The one whose beam matches the area to be lit: wide and diffuse for a yard or a garage, tighter for a facade or a driveway. You then compare the housing and its mounting, then the control (switch, sensor or dimmer), before looking at the protection rating linked to water exposure.

Powerful outdoor LED flood light: what makes the difference

A tight beam carried by a high mounting covers a whole facade or driveway without adding more light points. The result comes from precise aiming, not from a number on the box. As proof, look at the housing material (treated aluminium, thermoplastic), the protective glass, an integrated LED rather than a replaceable socket, and a mounting plate that screws onto a solid support. Find these models in outdoor LED lighting, designed to stay outside all year.

Outdoor LED flood light with sensor: range and settings

The sensor changes how you use it: the light comes on as you pass and turns off by itself, which suits entrances and traffic areas. You set the detection range so it stops before the street, the delay to avoid abrupt cut-offs, and the sensitivity so it does not trigger when an animal passes. Motion sensor models are mounted at the same height as a standard flood light, aimed at the ground.

What is the ideal power for an outdoor LED flood light?

Wattage alone is not enough to judge: it is read together with the luminous flux in lumens and the colour temperature in kelvins. A wide beam needs more flux than a tight beam, and a good quality integrated LED lights just as much with fewer watts consumed.

Do you need a 100 W LED flood light?

The question works the other way round: start from the surface to cover and the beam width, then see which power is enough. A high-power flood light aimed badly dazzles more than it lights. In general, a temperature around 3,000 to 4,000 K gives a neutral white that reads well on a facade, while a cooler white is reserved for technical spaces such as a garage or a workshop.

Solar LED flood lights: what does the stated power mean?

On a solar model, the stated power refers to the LED and not to actual consumption: it is a commercial indication, not a consumption measurement. Battery life depends mainly on the size of the panel and the battery, as well as the sunlight at the location. Solar flood lights are therefore chosen on the desired lighting duration, not on a number in watts.

Where to install an outdoor LED flood light?

An outdoor LED flood light goes where the light needs to be directed: facade and entrance with a tight beam, garage on the ceiling for even light, garden and beds with discreet lighting, poolside with a watertight recessed model. With no possible connection, a solar or rechargeable model takes over.

Garage LED lighting: which light on the ceiling?

On the ceiling, a wide-beam flood light gives even light across the whole surface, with no dark zone between vehicles and no shadow under the bonnet. LED lighting for garages is chosen with a watertight housing if the room is damp, and never aimed at a heat source. For a workshop, a fixed model is enough; mobility adds nothing once the area is defined.

Facade, driveway or terrace: which outdoor flood light?

On a facade, a tight beam highlights a wall or lights an entrance without flooding the street. In a garden, garden lights stay discreet by day and can be adjusted in the evening. Around a pool, watertightness comes before looks: recessed concrete flood lights for pools resist water and chlorine, and stand flood lights cover a terrace with no building work.

How to install an outdoor LED flood light?

Fix the flood light on a solid support, high enough to cover the area without dazzling, and tilt it towards the ground rather than towards the eyes. The connection is made with the power off, with a tight cable gland to keep the housing watertight.

Height and aiming: avoiding glare

A flood light placed too low sends its light into your eyes and creates long shadows. Mount it above eye level, under a roof overhang where possible, and tilt it towards the area to be lit. The higher the source and the tighter the beam, the less power you need for a clear result.

Connection, watertightness and fixing to the support

Switching off the circuit breaker comes before any connection. Then check that the cable enters the cable gland freely, that the cover gasket is in place and that the plate screws bite into a solid support, not into hollow render. Watertight versions are designed for this: closed housing, protective glass and replaceable gasket.

Motion sensor, dimmer or switch: which control to choose?

A motion sensor suits driveways and gates: the light comes on as you pass and turns off by itself. A dimmer is for terraces where you set the mood. A switch remains the simplest for a facade lit at a fixed time, and solar or rechargeable models remove the need for wiring.

Motion sensor: angle, range and delay

Three settings decide comfort: the detection angle, the range and the lighting duration. Aim the head towards the traffic area, never towards the street, to limit false triggers. Motion sensor flood lights and dimmer models differ here: the first responds to movement, the second to your brightness setting.

Rechargeable and solar: battery life with no wiring

When running a cable is not possible, rechargeable flood lights sit on a stand, a clamp or a metal surface, then recharge. The solar model with sensor combines both advantages: no power supply, and lighting only on movement. Battery life varies with sunlight and panel orientation.

How to care for and make an LED flood light last?

An LED flood light lasts longer if its glass and heat sink stay clean and if the sensor is not hidden by vegetation. Check the gasket and the cable gland after winter; stagnant moisture and accumulated dust are the two most common causes of wear.

Cleaning the glass and clearing the sensor

A soft cloth and clean water are enough on the glass and on the heat sink fins. Trim the vegetation in front of the detection cell, otherwise it triggers or blocks the light. A yearly look at the fixing screws and the state of the gasket prevents an infiltration from setting in unnoticed.

What damages an LED outdoors

Moisture stagnating in a badly closed housing, dust preventing the heat sink from cooling and aiming towards a heat source are the three factors that shorten an LED's life. On a terrace or near a pool, pool flood lights and the whole of our flood light range gather the references made for these environments.

LED flood light or LED ceiling light: which fixture for which room?

An LED flood light lights a facade, a garage or a garden with a directed beam. An LED ceiling light, a chandelier or an LED wall light lights a living room with light spread over the ceiling or a wall. The two families do not replace each other: they meet different needs.

LED ceiling light, LED chandelier, LED wall light: indoor fixtures

In a living room, a bedroom or a hallway, the light comes from the ceiling and spreads throughout the room. A ceiling light covers a whole surface, a wall light lights a vertical plane or a passage, a chandelier structures the centre of the room. These families are found in the Designix lighting catalogue, separate from outdoor solutions.

LED ceiling lighting: where to place each source

Combine rather than replace: a central point on the ceiling, one or two wall accents, a low source for reading. For a living room, a warm white around 2,700 to 3,000 K stays comfortable in the evening. That is the role of the full range of indoor lights, whereas a flood light is used outside or in a technical space. For an office or a desk corner, an adjustable model from our indoor lighting range will be more accurate than a flood light.

White, RGB or industrial style LED flood lights: which finish to choose?

The finish is chosen first when switched off: a white housing blends into a light wall, a dark colour merges into cladding. RGB serves deliberate coloured lighting, on a terrace or in a garden. The industrial style suits workshops and raw spaces.

White LED flood lights for light facades

By day, white disappears on light render or stone and keeps the facade readable. It is the most understated choice for an entrance or a gable. White finishes also suit the surroundings of a terrace where the housing should stay discreet, without becoming a black spot on the wall.

RGB LED flood lights: when colour makes sense

Colour is justified for a deliberate effect: highlighting a hedge, animating a terrace, marking a party. Outside that context, it tires and ages quickly. The RGB range can be controlled to change the mood, while the industrial style embraces a raw, visible housing, designed for a workshop, a loft or a technical room.

Frequently asked questions

Order from Designix

Secure payment, tracked delivery, accepted returns and Designix customer service to help you choose between a tight beam and a wide beam. The current price of each reference is shown directly in the collection grid.

Start with the area to light, then open stand flood lights if wall mounting is not possible, or browse rechargeable flood lights for mobile use.