IP44 wall light

An IP44 wall light is chosen first by its room and its socket: an LED strip above the mirror in a bathroom, an E27 model in a hallway or entrance, a round or tube shape in narrow toilets. The code 44 means the wall light resists solid objects over 1 mm and water splashes, which covers most damp areas of a home.

What is IP44 protection?

IP44 is a two-digit protection rating. The first 4 indicates protection against solid objects over 1 mm, dust and tools included; the second 4, against water splashes. It is the dominant rating of the wall lights in this selection.

What exactly do the two digits of the IP rating mean?

The first digit rates mechanical protection, the second protection against water. A 4 in first position keeps out coarse dust and objects over 1 mm; a 4 in second position withstands splashes from all directions, like those from a sink or a nearby shower. An IP44 wall light is neither immersible nor designed for a high-pressure jet.

IP44 or IP45: what difference for a bathroom wall light?

IP45 adds tolerance to low-pressure water jets, without immersion. On a bathroom wall away from the shower, IP44 is enough; in a very wet shower room, an IP45 model like the Boule Luminance wall light leaves more margin. When in doubt, take the higher rating: it changes nothing about the light output.

Which IP44 wall light for the bathroom?

For a bathroom, an IP44 wall light is fixed above the mirror or as a side wall light, at face height. The collection listings announce LED strips in 12 W, 13 W, 15 W and 20 W, in aluminium or metal, in sand white, matte black or chrome depending on the model.

IP44 wall light with switch: should a wall control be planned?

No listing in this selection describes an integrated switch: control is done at the wall. So plan the switch near the door rather than under the wall light, more practical in a damp room where you enter with wet hands. It is also what allows you to pair the wall light with the other points in the room, and to join effortlessly the bathroom wall lights with the rest of the lighting.

IP44 wall light black, white or chrome: which finish to choose?

Chrome follows the taps and shower panels, sand white blends into a light wall, matte black marks the contrast. In the collection facts, white dominates, followed by black, gold, grey and silver. The black finishes require a rather bright wall so as not to weigh down a small space.

How to choose between an IP44 LED wall light and an E27, G9 or E14 socket wall light?

An integrated LED wall light requires no bulb and suits slim bathroom models; wall lights with E27, G9, E14 or G4 sockets take a bulb of your choice, which allows you to adjust the colour temperature and replace the source easily.

Powerful LED wall light: which wattage to choose?

For a large room, it is better to spread the light than to concentrate high power on a single point. Two-light wall lights with E27 sockets, limited to 15 W per socket, light more widely than a single source and can be adjusted in colour temperature. Integrated LED wall lights, on the other hand, stay slimmer on the wall and cannot be replaced.

E27, G9 or E14 socket: which format for a narrow wall light?

G9 and G4 fit in reduced spaces, E14 in a slim but tall wall light, E27 in wide or two-socket models. Check the maximum wattage indicated on the listing before buying the bulb.

Where to install an IP44 wall light outside the bathroom?

IP44 is useful wherever humidity or splashes exist: toilets, hallway, entrance, staircase, covered terrace and outdoor under an awning. The collection includes models designed for these rooms, with or without source, in graphite, black, chrome or brushed brass versions.

Staircase wall light: at what height to fix it?

On a staircase, allow one wall light every three to four metres of wall, at hand height, around 90 cm to 1.20 m from the step edge. A model diffusing upwards and downwards avoids dark areas between two flights. The staircase wall lights with E27 sockets can be adjusted in intensity according to the time.

Waterproof outdoor wall light: awning, terrace or entrance?

Under an awning or a covered terrace, IP44 is suitable, like the 7 W graphite outdoor wall light or the direct and indirect models with E27 sockets. It must be placed sheltered from direct run-off and away from areas where water stagnates after rain. For a facade beaten by bad weather, aim for higher protection.

Living room wall light: how to integrate an IP44 model into the lounge?

In a living room, the IP44 wall light plays the role of accent lighting: it lights a reading corner, frames a sofa or highlights a wall. Models with E27 sockets and two-light versions are best suited to this use, with a warm white more restful than a cold white.

Modern living room wall light: which shape to favour?

In a contemporary interior, tube and ball shapes fit anywhere, the ball bringing a softer note. The modern style wall lights in the collection mainly play with glass and metal. A low, long line lights a section of wall without cutting it up, a tall shape structures a corner.

Powerful living room wall light: two light points or a single source?

Two sources, like the Satelite two-light wall light with E27 sockets, reach 2 x 15 W and cover an area twice as wide as a single point. One source is enough for a reading corner. In both cases, a warm white around 2700 to 3500 K is more restful in the evening than a cold white.

Toilet and WC wall light: how to light a small damp space?

In a toilet, the space above the sink is reduced: a compact IP44 wall light, with integrated LED or E14 socket, lights without invading the wall. Round or tube shapes, in metal and aluminium, are the most suitable there.

Design WC wall light: what to choose when the wall is narrow?

Favour height over width: a wall light less than ten centimetres deep leaves the passage free. The sand black E14 wall light illustrates this vertical format, also usable in a dressing room or an entrance. The round wall lights give a simple design that ages well.

What lighting to place above the toilet without dazzling?

Avoid the light point placed in the line of sight when seated. A model diffusing downwards or to the sides, placed at an angle, lights the floor and the wall without dazzling. A warm white bulb and moderate wattage do the rest in a volume of a few square metres.

IP44 wall light brass, black or chrome: which material and colour to choose?

Glass and aluminium dominate the collection, followed by metal, steel and brass. Matte black and white suit understated bathrooms, gold and brushed brass warm up a chic country interior, while chrome and silver match the taps.

IP44 vintage or boho chic wall light: how to carry it off?

Brushed brass and clear glass carry this look effortlessly, especially with a visible filament bulb. The brushed brass wall light with G9 socket is placed alone or in pairs on either side of a mirror. A gold wall light is enough to warm a white wall, no need to multiply the points.

Original wall light: dare a shape that breaks the standard?

A few models depart from the tube and the ball, like the Oryn monkey-shaped wall light, in resin, glass and metal, with E27 socket. This type of piece is reserved for a clear wall, in an entrance or a living room, where it becomes the focal point of the room. The glass models remain the safest choice for a classic interior.

How to install and maintain an IP44 wall light?

The wall light is fixed out of reach of direct splashes from the shower or bathtub, on a sound support, and is connected to the mains by a professional when the circuit is in a damp area. A soft cloth is enough for maintenance; abrasive products wear the lacquered finishes.

Is a class 2 IP44 wall light necessary in a bathroom?

The electrical class is not indicated in the listings of this collection. In a damp area, a class II with double insulation is often sought because it does not require an earth connection, but only a professional can validate the class and connection suited to your installation. Have the circuit installed before choosing the final model.

How to clean a bathroom wall light without scratching it?

Cut the power, then wipe with a slightly damp microfibre cloth, without aggressive detergent or abrasive sponge. On glass, a standard window product is enough; on aluminium and brushed brass, wipe in the direction of the brushing. Stubborn limescale comes off badly: regular wiping is better than energetic cleaning.

Our models are covered by a two or three year warranty depending on the listings. Only a few references accept a dimmer, to be checked before installing a module: browse the wall lights and the rest of the Designix lighting catalogue to compare formats. Secure payment, tracked delivery, returns and Designix customer service accompany you from choice to installation.

Frequently asked questions about the IP44 wall light