Concrete recessed spotlights for terrace

This selection is also available in our French store: Spots encastrables en béton pour terrasse

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right light output?
Allow about 100 to 300 lumens per m²: about 150 lm/m² for a living room, about 350 for a kitchen. Each product page lists the lumens.
At what height should the light be installed?
Above a table: 70-85 cm from the tabletop; in a walkway: at least 2.10 m of clearance below the bulb.
What type of bulb?
Usually E27 or E14, sometimes GU10. Specified on each product page.
Compatible with LEDs and dimmers?
Yes, in most cases; for use with a dimmer, look for the “dimmable” mention.
Concrete recessed spotlights for terrace
Designix · Design lighting

Light changes everything

From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Plan for one light point every two to three metres along a path, with the bezel flush with the slab and the beam directed at the ground. A concrete recessed terrace spotlight is installed within the thickness of the ground, withstands foot traffic and disappears during the day. It highlights a walkway, runs alongside a pool deck or marks a step edge without creating an obstacle.

What is a concrete recessed terrace spotlight?

In the evening, the difference is immediate: the path reads on its own, the pool edge is defined, and your foot catches on nothing. The fixture itself is a block that is set into the slab or a concrete mounting plate, with a bezel that stays level with the ground. Water must be able to drain away beneath the housing, and the protective glass remains accessible for cleaning.

Concrete recessed terrace spotlight: what exactly gets recessed

It is neither a bollard nor a facade projector. A bollard stands proud and is visible from afar; a projector is fixed to the wall and casts a wide beam. A recessed spotlight passes through the ground layer: the body sits in the slab or in a dedicated mounting plate, and only the bezel stays flush. The range of recessed outdoor spotlights brings together these housings designed for damp conditions and foot traffic.

Concrete terrace spotlights: where they belong

Four locations come up again and again: the perimeter of the terrace to mark its boundary, the walkway and access path to guide, the pool deck to highlight the basin set back from the edge, and steps to prevent falls. A door threshold also works very well as a recessed installation, as shown in the selection of spotlights for threshold and entrance lighting. For a staircase, see the spotlights for steps and stairs, designed for a side cut-out.

Which recessed spotlight should you choose for a terrace?

Four criteria decide, in this order: the water resistance stated on the product sheet, the bezel's resistance to foot traffic, the depth available in the slab, and the type of light source. A fixed model is enough to run alongside a walkway. An adjustable model is used to direct the beam towards a wall or planting, and can be found among the adjustable recessed spotlights.

The four deciding criteria

Water resistance is shown by the ingress protection rating: outdoors, IP65 or higher is common for a ground fixture, but the product sheet is what counts rather than a general rule. The bezel must take foot traffic without deforming; on a pedestrian path, a wide, well-secured bezel holds up better than a thin ring. Recess depth determines feasibility: under a thin slab, a housing that is too deep will not fit. Finally, the source: integrated LED (nothing to open) or replaceable bulb, often with a GU10 base. The LED outdoor models simplify maintenance in damp ground.

Mistakes to avoid

Buying without reading the water resistance line, fitting a bezel that is too thin in a traffic area, forgetting water drainage beneath the housing. You should also avoid ordering before measuring the actual slab thickness and the space left for the cable. For a beam you want to adjust over time, compare with the adjustable terrace spotlights before deciding.

Which type of spotlight for which terrace area
Terrace area Main constraint Preferred spotlight type What to check on the product sheet
Covered terrace, under a canopy Little water, dust Fixed or adjustable recessed Stated ingress protection rating, recess depth
Open terrace, traffic area Load and friction on the bezel Flush with a wide bezel Load resistance, fixing, seal
Pool edge and deck Splashes, standing water Watertight with protective glass Ingress protection rating, drainage beneath the housing
Walkway and access path Sweeping the ground without glare Adjustable with directed beam Tilt angle, rear clearance
Outdoor steps and stairs Cut-out in the step Side-recessed or step-edge mounted Bezel width, cable routing
Concrete slab already poured No provision possible Flat bezel or floor mounting plate Drill diameter, slab thickness

How do you install a recessed spotlight in a concrete terrace?

There are only two situations. Slab yet to be poured: you embed a provision and a conduit before the concrete, keeping the cable entry accessible. Existing slab: you core drill at the body diameter, check the thickness and ensure water drainage. In both cases, the bezel must sit flush so it does not catch.

Preparing the provision before pouring

The order matters: position the points, lay the conduits, embed the provisions at the right diameter, then pour. Leave each conduit protruding slightly so you do not lose it in the concrete, and mark the ends on the plan. Allow a slight slope or a drainage layer beneath the housing: water must flow away, never sit against the seal. All the outdoor hardware for the project coordinates with the rest of our full lighting range.

Recessing into an already poured slab

Core drilling is done at the body diameter, checking verticality for each hole. Check that there is enough room beneath the slab for the housing and the cable. The bezel is sealed exactly level with the ground, with no protrusion. If the slab is too thin, it is better to give up and look at recessed kitchen spotlights or another indoor use rather than forcing it.

How should you lay out spotlights on a terrace or walkway?

You aim for regularity: a constant gap between points, a first spotlight set back from the wall, a beam directed at the ground or the facade. Avoid lighting directly towards seating and drawing a line that draws the eye more than the terrace itself. A few well-placed points are better than many.

Spacing them evenly along the path

A gap of two to three metres suits a garden path, adjusted according to beam width and path length. The first point is set back from the wall by a step or two: pressed against the facade, it creates a harsh patch. On a terrace, place the points around the perimeter rather than in the centre, to light without occupying the ground. For a large area, two discreet lines are better than a grid. Compare the spotlights with a crafted design if the bezel remains visible during the day.

Avoiding glare from seating

No beam directed towards the table, chairs or glass door. Tilt slightly towards the ground or towards a planting bed, and keep low sources out of the field of view when seated. A dimmer solves a good part of the problem: dimmable recessed spotlights let you lower the light late in the evening, when the eye adjusts to the dark.

You now have the criteria: browse the selection of recessed outdoor spotlights and note the ingress protection rating and depth of each model before ordering.

What are the drawbacks of a concrete terrace?

Concrete accumulates heat, retains water if the slope is insufficient and cracks with frost. For a spotlight, this requires a housing that drains water downwards, a seal in good condition and a bezel that does not trap puddles. On the other hand, the slab provides a stable surface and a clean flush finish.

Water, cracks and frost: what this demands of the spotlight

A persistent puddle around the housing will eventually find the seal. Hence the importance of a regular slope and a drainage layer beneath the fixture. A crack running through the recess area should be monitored: it can shift the bezel and open a passage for water. Frost, meanwhile, works on the seals: a flexible installation ages better than a rigid one.

What concrete still offers

A flat, stable surface that accepts a flush bezel without play, and that releases stored heat early in the evening. It is also a surface that can be swept and washed, which simplifies maintenance of ground fixtures. The LED version of these housings can be found among the LED outdoor models.

What light lets you enjoy the terrace in the evening?

A warm white relaxes the terrace in the evening, a neutral white lights a path more clearly. The important thing is to stay within the same family of colour temperatures from one area to another, to control the intensity and to direct the beams towards the ground rather than towards the eyes.

Choosing between warm white and neutral white

As a general guide, a warm white sits around 2700 to 3000 kelvins, a neutral white around 4000 kelvins. The first softens the grey of the concrete and suits areas where people sit; the second makes steps and obstacles easier to see. Mixing the two on the same terrace creates a visible break: keep a single family of light colour per area.

Lowering the intensity and directing the beam

A beam grazing the ground highlights the material; a beam towards a wall or planting bed adds relief without glare. Dimming, combined with dimming with integrated LED, lets you move from circulation lighting to an end-of-meal atmosphere. The same grammar applies indoors, for example with LED spotlights for the living room.

Which colour and finish for a concrete terrace spotlight?

On a grey slab, a concrete or stainless steel bezel disappears, a matte black draws a crisp point, a gold warms the mineral surface. The colour is chosen to match the joinery and furniture, not to clash with them. The spotlight should read as a detail of the terrace, not as an add-on object.

White, black or gold on a grey slab

White and white finishes blend into a light-coloured ground and suit very mineral terraces. Black bezels match dark joinery and graphic furniture. Gold tones add a warm accent, echoing a wooden deck or a rattan chair.

Extending the palette indoors

When a glass door connects the terrace to the room, the same family of greys, blacks and woods serves a modern kitchen decor without a visual break. Kitchen decoration benefits from repeating these tones on splashbacks and handles, and the transition happens naturally with recessed kitchen spotlights. For a circulation room, see how to light a hallway with the same logic.

Bezel finishes: what they change on a concrete floor
Finish Effect on the slab Maintenance Matches with
Raw concrete, grey Disappears into the ground Clean water, cloth Mineral terrace, dry garden
Matte black aluminium Draws a crisp point Soft cloth, no abrasive Black joinery, graphic furniture
Brushed stainless steel Discreet, understated reflection Non-abrasive sponge Outdoor kitchen, plancha
Brass, gold Warm accent on the mineral surface Accept the patina Wooden furniture, rattan
Exposed protective glass Shows the light source Regular glass cleaning Contemporary terraces

How do you maintain a spotlight recessed in a concrete slab?

Cleaning with clean water and a soft cloth is enough for the bezel and the glass. Before winter, check that water does not pool around the housing and that the seal holds. Do not open a sealed fixture and do not use abrasives on a matte or brushed finish.

Cleaning the bezel and glass without scratching

Remove leaves and grit caught in the ring, then wipe with a damp cloth. On tarnished glass, a mild product is enough; abrasives scratch the surface and make it more prone to deposits. On a brushed finish, rub in the direction of the brushing. An adjustable spotlight should also be cleaned while checking that its aim has not moved.

Checking the seal and drainage before winter

Check the slope around the fixture and the absence of puddles after rain. A peeling seal or a cracked glass should be dealt with before the frosts. If a point no longer lights up, the cause is often a cable connector left damp: have the connection checked rather than opening the housing.

Secure payment, tracked delivery, returns and Designix customer service: order with confidence, and the team answers your sizing questions before purchase. Find the ground housings in recessed outdoor spotlights and the full catalogue in our lighting world.

Frequently asked questions

Which recessed spotlight should you choose for a terrace with a pool?

Favour a model whose product sheet states a high level of water resistance and a protective glass, recessed set back from the deck to limit splashes. The bezel must stay flush and the housing must drain water downwards. Direct the beam towards the ground, never towards bathers' eyes.

How should you lay out spotlights on a ceiling?

On a ceiling, the logic remains the same as on the ground: regularity and distance from walls. Keep a constant gap between points and set the first one back from the wall, adjusting to the room. Avoid aligning a spotlight directly above seating or a worktop.

Can you recess a spotlight into an already poured concrete terrace?

Yes, by core drilling, provided you check the slab thickness and leave enough room beneath the housing for the cable and water drainage. Drill at the body diameter, check verticality, then seal the bezel level with the ground.

Should you use an LED spotlight or a bulb spotlight for a terrace?

An integrated LED spotlight avoids opening the fixture and choosing a bulb, which simplifies maintenance in ground exposed to damp. A spotlight with a replaceable bulb, often with a GU10 base, lets you change the source or the light colour without dismantling the housing.

How do you avoid glare on a lit terrace?

Direct the beams towards the ground, a wall or a planting bed, never towards the area where people sit. A recessed spotlight set back from the traffic path and slightly tilted lights without glare. A dimmer helps lower the intensity late in the evening, when the eye adjusts to the dark.

Our advice for choosing
This collection brings together recessed spotlights for installation in concrete slabs or mounting plates, designed to light a terrace, a pathway or a poolside. Here you will find the criteria that matter: water resistance, load-bearing capacity, recess depth and light colour.