Touch-sensitive desk lamps

A touch desk lamp turns on when you touch the base, the shade or the ring with your hand, with no switch to look for. All the models gathered here are LED, in warm white from 2700 to 3500 K, with a dimmer that adjusts the brightness at your fingertips.

Which lamps turn on when touched?

A touch lamp turns on when your hand touches an area of the base, the shade or the ring: a capacitive sensor replaces the switch. All the references in this selection are LED, in warm white from 2700 to 3500 K, and fitted with a dimmer that adjusts the brightness at your fingertips.

Touch table lamp for a desk

On a desk, a simple press changes the gesture: you rest your hand on the base when you arrive, you brush it again when you leave, with no switch to look for behind a screen or under a shade. The Rechargea rechargeable touch lamp adds a tilting shade that sends the light towards the keyboard or towards a document. For nomadic use, adjustable table lamps complement this type of workstation well.

How does the touch dimmer work?

A short press turns the lamp on or off, a held press raises then lowers the brightness, depending on the logic chosen by the manufacturer. All the models in the selection are fitted with a dimmer, which avoids having to choose between light that is too strong in the evening and too weak in the middle of the day. The Elitoreno LED dome works this way. More ideas in our designer LED lamps.

What is the best lighting for a desk?

For a desk, a warm white light of 2700 to 3500 K placed to the side, and not facing the screen, keeps the work surface readable while limiting reflections. The dimmer lets you raise the brightness to read a document and lower it at the end of the day. Here, all the models are LED and touch-adjustable.

Warm white or cool light for working?

Warm white, around 2700 to 3500 K, gives a tone close to evening light: paper stays readable, the screen does not take on a blue tint and the eye tires less over a long session. A very cool light, beyond 5000 K, remains useful for a short precision task, but it hardens contrasts on a workstation used for long periods. That is why the selection stays entirely in warm white, like most designer desk lamps.

Where should the lamp go on the desk?

Next to the screen, on the opposite side to the writing hand, so that the shadow of the arm does not fall on the sheet. Avoid the line of sight, which places the source in the field of vision and causes glare. A tilting arm or a high ring lets you adjust without moving the base of the lamp.

How to choose a touch desk lamp?

First look at the footprint: 16.5 x 25.5 cm for a narrow top, 22 x 40 cm for a wider desk, H 75 cm to light above the surface. Then come the material, metal or brushed steel, the protection rating, IP20 in a dry room and IP44 near a window, then the colour.

What height and diameter for a desk?

On a top 60 to 80 cm deep, a base of 16.5 x 25.5 cm leaves room for folders and the keyboard; this is the size of the Elitoreno dome. A wider desk accepts a model of 22 x 40 cm, and a lamp 75 cm high lights from the floor or from a cabinet, like the silver Anelo II ring. Measure the free area before deciding.

Metal or brushed steel: which material for the lamp?

Painted metal gives a clean silhouette and matches white or black desks. Brushed steel, lighter, shows fingerprints less and stays understated on a wooden work surface. Both are cleaned with a soft cloth. To dig deeper, see the metal desk lamps, the white version for desks or the black colourway for desks.

Which touch lamp for the living room, the bedroom or the desk?

The models in the selection suit the living room, the bedroom and the desk; the IP44 ones also withstand water splashes, so a sheltered balcony or a covered terrace. In the living room, a ring or a dome spreads light more widely; at the bedside, a low format; on a desk, a tilting shade remains the most practical.

How to recognise the most beautiful living room lamps?

A shape that reads clearly from a distance, a colour that answers the sofa and the walls, and a base that does not impose itself in the field of vision. The dome and the ring keep to this restraint. In this family, the designer living room lamps and the modern living room models share this restraint.

Which light colour for the living room?

Warm white from 2700 to 3500 K, with a dimmer, suits the living room: bright enough to read, soft enough for the evening. You raise the brightness for a game or a dinner, you lower it to watch a film. For a bedroom, same principle, with a lower format: see the designer bedroom lamps, the LED bedside lighting and the black metal bedside lamp.

How to match the touch lamp with the room's decoration?

White blends into light walls, anthracite and black create a contrast on a white work surface, silver accompanies the brushed steel of a desk. Round shapes, dome or ring, stay understated in a contemporary or modern interior, and the dimmer adapts the brightness to the time of day.

Italian design table lamp: how to recognise it?

Simple lines, ring or dome, brushed metal, no frills: the design holds in a single gesture, and the touch replaces the visible button. The modern desk lamps take up this vocabulary on a workstation, while ceramic or crystal play a different, more decorative tune.

A touch lamp in an open kitchen?

Yes, as additional light on the worktop or the island, when kitchen decoration matters as much as lighting. An IP44 model tolerates splashes around the sink; in a dry area, an IP20 is enough. For a modern kitchen decor, stay with a single colour and a round shape: the LED kitchen lamps set the tone.

How to install and maintain a touch lamp?

A touch lamp plugs in like any other light: into a socket for a model with a cable, or wirelessly after recharging for the rechargeable version. Cleaning is done with a soft cloth, dry or barely damp, on metal and steel, without abrasive products or excess water on the sensor.

How to plug several lamps into a single power supply?

A power strip or a row of sockets is enough, provided you add up the wattages of the lights and stay below the capacity of the circuit, indicated on the breaker. A 5 W LED lamp weighs very little in this total. Avoid daisy-chaining extension leads and keep the sockets accessible. The rest of the Designix lighting catalogue follows the same rules.

How to clean a metal touch lamp?

Dry microfibre cloth for dust, barely damp cloth for a mark, then dry immediately. No alcohol, no scouring sponge, no abrasive product: the brushed finish scratches easily. On the sensor, wring out the cloth so as not to trigger the light during cleaning, and switch off the power if the model allows it.

Can a touch lamp be used outdoors?

An IP44 model resists water splashes and small solids: it can stay on a covered terrace or a sheltered balcony, never in heavy rain or beside a pond. An IP20 model is reserved for dry rooms. Check the rating on the product page before choosing the location. The Elitoreno dome and the Rechargea are rated IP44, the Anelo II ring is IP20. Outdoors, also avoid direct sunlight on the shade and bring the lamp in when it is very windy.

Ordering a touch lamp from Designix

Secure payment, tracked delivery, returns and Designix customer service: the process remains the same as for the rest of the lighting catalogue. Unsure between two formats? Compare the dimensions in the table, then choose the desk lamp that leaves enough room on the top. The LED desk models and the white design versions complete the comparison.

Frequently asked questions