Rechargeable spotlights
This selection is also available in our French store: Spots rechargeables
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right light output?
At what height should the light be installed?
What type of bulb?
Compatible with LEDs and dimmers?
Light changes everything
From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A rechargeable spotlight runs on a built-in battery: no power supply, no drilling to connect it. You place it, clip it or magnetically attach it where light is missing, then recharge it by cable or on its dock. Before choosing, count the areas to light, then the possible mounting and the colour temperature.
- How a rechargeable spotlight works
- Where to install it
- What light it gives
- How to choose it
- How to arrange them
- Series or parallel
- LED that stays on
- Care and ordering
What is a rechargeable spotlight and how does it work?
A rechargeable spotlight is a self-contained LED spotlight: its built-in battery powers the source, recharged by cable or on a dock. No mains connection, so no cable to run, no switch to fit, no hole in a piece of furniture. You move it from room to room and aim it as you wish. The collection has 7 rechargeable spotlights.
Rechargeable spotlights or rechargeable LED spotlights: what is the difference?
None: both mean the same thing. A rechargeable spotlight contains an LED, and the phrase rechargeable LED spotlight simply specifies the source. Either way, we are talking about a wireless spotlight that runs on battery. The choice then comes down to the variant, and adjustable LED spotlights suit uses where the beam needs to follow a surface.
Battery and charging: what makes the spotlight self-contained
The rechargeable battery is the heart of the system. Two modes coexist: the cable plugged directly into the spotlight, or the charging dock on which you rest the unit. The second avoids handling a connector every time, handy above a worktop. Follow the manufacturer's instructions for charging time and frequency.
Where to install a wireless rechargeable spotlight?
Anywhere no cable reaches: under a kitchen unit, above a worktop, at the head of a bed, in a hallway, a dressing room or an entryway. This is the typical case for a rental, an already-assembled unit or an area forgotten during the works. The light goes exactly where it was missing.
In which rooms does a wireless spotlight replace fixed lighting?
In closed volumes and circulation areas, it does the job of fixed lighting: inside a cupboard, a dressing room, a long hallway, an entryway. For the kitchen, see the LED spotlights for kitchens. In the bedroom, bedroom spotlights replace a bedside lamp and free up the nightstand. In a hallway, hallway models avoid crossing a dark area.
Can it be used outdoors or in a damp room?
Only if the product sheet states a protection rating suited to moisture or splashes. Otherwise, keep the spotlight indoors. A model with no mention of water resistance remains an indoor light, even placed under a canopy: condensation and fine rain eventually reach the electronics and the battery.
What light does a rechargeable spotlight give?
It all depends on the colour temperature and the beam. A warm white, generally around 2700 to 3000 K, gives a soft light, suited to a living room or bedroom. A neutral white, around 4000 K, lights a worktop, a hallway or a dressing room more sharply. A narrow beam highlights a surface, a wide beam lights a circulation area without leaving dark patches.
Warm white or neutral white: which colour temperature to choose?
Choose by use, not by trend. Warm white for living, eating, reading: it rests the eye in the evening. Neutral white for cooking, working, searching in a cupboard: it renders colours and contrasts better. Cool white, more flat, is reserved for garages and technical rooms. On the same worktop, mix as little as possible.
Adjustable spotlight and dimming: what it changes day to day
An adjustable spotlight directs the beam towards the useful surface instead of lighting straight ahead. Dimming lets you lower the light late in the evening without switching off. Together, the two adjustments cover both mood and work in the same room, which explains the appeal of modern-style spotlights in a living room.
How to choose your rechargeable spotlight?
You first choose the mounting according to the support: magnetic base on a metal surface, clip on a shelf or worktop, screw fixing or simple placement when nothing can be magnetised. Then come the orientation, the dimming, the material, the colour and the size.
Magnetic, clip-on, screw-on or freestanding: which mounting to choose?
The magnetic base fixes onto a metal unit and comes off one-handed. The clip grips a board or a rim. The screw fixing holds on a wall or under a wooden unit, while simple placement is happy on a shelf. Check the support before ordering: a magnet adheres to neither wood nor plaster.
Material, colour and finish: how to match the spotlight to the room?
Metal stays understated and ages little, metal spotlights go anywhere. Black finishes blend into a dark interior or an anthracite worktop. On a light wall, white spotlights almost disappear. For a visible object, look instead at the design range. The dimmable variants add dimming in the same format.
| Room | Main use | Recommended mounting | What makes the difference |
|---|---|---|---|
| Kitchen | Lighting the worktop and the splashback | Magnetic base under a unit or screw fixing | Beam directed at the worktop, without glare |
| Living room | Reading and highlighting | Placed on furniture, clip or magnetic base | Dimming and warm light |
| Bedroom | Bedside and mood | Placement or light wall fixing | Soft light and adjustable orientation |
| Hallway and entryway | Circulation | Placement or wall fixing | Wide beam to limit dark patches |
| Dressing room and cupboard | Seeing inside a closed volume | Magnetic base | Occasional switching on, no wiring in the unit |
| Terrace and outdoors | Extra lighting in the evening | Stable placement or screw fixing | Model whose sheet states a suitable protection rating |
How to arrange spotlights on the ceiling?
You arrange spotlights according to the areas to light, not according to the geometry of the ceiling: one point above the worktop, another in front of the wall units, aligning them with the lines of the room. Regular spacing and crossed orientation avoid dark patches and glare. A rechargeable spotlight imposes no wiring grid.
How many spotlights to plan in a kitchen?
No single number works for every kitchen: count the use areas rather than the square metres. One point on the worktop, one on the sink or splashback, one on the opening area. If you prefer a permanent installation, the recessed version for kitchens is wired, while the rechargeable spotlight is added without works.
How to distribute the points in a living room or hallway?
In a living room, aim for the reading corners and the walls to highlight rather than the centre of the room. In a hallway, align the points on one side and aim them at the floor to avoid lighting faces head-on. For a living space, living room lighting solutions favour several low sources.
How to wire spotlights in series or in parallel?
In a series circuit, the spotlights share the same line: if one fails, the whole circuit goes out. In parallel, each spotlight keeps its own supply and works independently. Parallel wiring is the most common in homes. A rechargeable spotlight removes the question: it runs on battery, with no cable or switch to connect.
Series or parallel: what does the wiring change?
Series wiring simplifies the cabling but adds up the weak points: a single failure cuts the whole set. Parallel wiring needs a little more cable and leaves each point independent, which makes troubleshooting easier. On recessed spotlights, the difference shows mainly on the day a power supply gives out.
When the wireless spotlight avoids any connection
In a rental, in an already-installed unit or in a room where the network is poor, the rechargeable spotlight avoids opening a wall. If you compare with wired equipment, look at the wired recessed range to gauge the installation gap: one screws into a ceiling, the other is placed and recharged.
| Criterion | Rechargeable spotlight | Classic recessed spotlight |
|---|---|---|
| Power | Built-in battery, recharged by cable or dock | Mains connection |
| Installation | No wiring: place, clip, magnetise or screw | Recessed into a ceiling, a false ceiling or a unit |
| Movement | Moves from room to room | Stays in place once fitted |
| Maintenance | Regular battery recharging | Bulb replacement depending on the cap |
| Ideal for | Rentals, already-installed units, areas with no power supply | General lighting of a room under construction or renovation |
Why does my LED bulb stay on even though the switch is off?
An LED that glows faintly after switching off is crossed by a residual current: a very small leakage from the wiring or from an indicator switch, which the electronic driver lets through. The LED is not truly powered, it barely lights. The solution involves a discharge module or a switch without an indicator, fitted by an electrician.
How to remove the residual current from LED lighting?
The treatment is done at the installation level, not the light: fitting a discharge module suited to the circuit, replacing the indicator switch, checking the neutral. This work is for an electrician. The symptom does not damage the light, but it signals a leakage to be corrected properly.
Do LED bulbs and spotlights use a lot of electricity?
An LED uses far less than a filament source for comparable lighting, and it heats little. The real consumption of a spotlight is read on its sheet, in watts. For a rechargeable spotlight, it is the battery recharge that counts, not a continuous draw from the grid. Beware of low-end models: their electronics age badly.
How to care for a rechargeable spotlight and where to order it?
A rechargeable spotlight asks little: dust the diffuser, clean the magnetic surface or the clip, recharge according to the instructions and store the battery away from the cold if the spotlight stays outside. Check the orientation setting from time to time, a spotlight that slips ends up lighting the wrong spot. At Designix, ordering is done with secure payment, with tracked delivery, returns and customer service.
Battery: the right charging and storage habits
Follow the charging rhythm given in the instructions rather than a general habit. Avoid leaving the unit in full sun or in an unheated room in winter: cold reduces charge retention. A damaged cable or connector can be replaced, you do not force a damaged port.
Payment, delivery and returns at Designix
Payment is secure, delivery is tracked, and returns are provided for if the model does not suit the intended support. Customer service answers questions on the choice of mounting and colour temperature. To place this model within the whole catalogue, browse all our lights. You can also compare with the white recessed spotlights.
Choose the mounting and the colour temperature, add the spotlight to the basket: recharging and installation are then done without tools.
Frequently asked questions about rechargeable spotlights
How many spotlights in a kitchen?
There is no single number: you count the areas to light rather than the square metres. One point above the worktop, another on the sink or splashback, one on the opening areas, avoiding lighting a reflective surface head-on. A rechargeable spotlight is added to the existing lighting without works.
How to wire spotlights in series or in parallel?
In series, the spotlights are chained on the same line: a failure cuts the whole set. In parallel, each receives its own supply and stays independent, which is the common wiring in homes. These connections concern spotlights linked to the mains: a rechargeable spotlight runs on battery and is not wired.
How to arrange spotlights on the ceiling?
You align them with the lines of the room and the use areas: worktop, circulation, surface to highlight. Regular spacing and crossed orientation limit shadow areas and glare. For a wireless spotlight, no wiring grid imposes their location.
How many lumens are needed for an LED spotlight?
There is no single value: the need depends on the surface, the installation height and the use, mood or work lighting. You compare the flux stated on the model's sheet, and prefer several moderate light points to a single very powerful source, which is more glaring.
What are the drawbacks of LED bulbs?
LEDs heat little and last a long time, but they remain sensitive to the quality of the supply: residual current that makes them glow after switching off, flickering with certain dimmers, sometimes cold light if the colour temperature is badly chosen. A poor-quality LED also loses brightness over time.
