Concrete spotlights for patio
This selection is also available in our French store: Spots en béton pour terrasse
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right light output?
At what height should the light be installed?
What type of bulb?
Compatible with LEDs and dimmers?

Light changes everything
From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Allow for a protection rating of at least IP65 in a sheltered area, and higher near a pond or a watering point. Then decide on the format: flush-mounted in the slab, a bollard on gravel, a wall light on a joist for a wooden deck. The light comes from the ground and grazes the surface, which is what sets a patio spotlight apart from facade lighting.
Which concrete spotlight for a patio should you choose?
On a patio, a concrete spotlight is chosen first on its protection rating: IP65 minimum in a sheltered area, higher near a pond or frequent watering. Next come the format, recessed in the ground or a bollard, the colour of the concrete and the way the light is emitted, upwards or as a wash.
Flush recessed or bollard: the mounting type decides the rest
A ground-recessed spotlight disappears into the slab and lets the light graze the surface: this is the mounting for paths and pool copings. A concrete light bollard is placed on gravel, a bed or a slope, with no recess needed, and marks out a low path. The format determines the drilling, the drainage and the cable access, and therefore the order of the works.
Protection rating and concrete colour
An IP65 rating covers water splashes and dust; at the edge of a pond or under automatic watering, aim higher. The colour comes last: raw concrete to blend into a slab, a light tone to match a facade. White models to match the facade are also available for the surroundings of a light-coloured house.
| Location | Mounting type | Protection rating to aim for | Light output | Point to watch |
|---|---|---|---|---|
| Pool edge | Recessed in the coping or bollard | High, water and splashes | Grazing wash towards the pool | Install outside the splash zone, protected cable |
| Path and walkway | Ground-recessed, flush | Medium to high | Narrow beam or step marking | Regular spacing, no glare |
| Wooden patio | Wall light on a joist or between two boards | High | Grazing light on the boards | Water drainage, no drilling through a load-bearing board |
| Covered patio and pergola | Ceiling-recessed or wall light | Medium, sheltered area | Downward ambience | Mounting height and beam shadows |
| Bed, gravel, slope | Bollard or surface-mounted block | High | Low-level marker | Stability of the base and drainage |
Compare the finishes available in the outdoor spotlight selection, then confirm your basket: secure payment, tracked delivery, returns and Designix customer service for compatibility questions.
How do you install a concrete spotlight in a concrete patio?
Installation requires a recess in the slab, a conduit for the cable and drainage at the bottom of the housing. The spotlight is then set level with the surface, without protruding, so that the light grazes the ground. The drilling diameter is always read on the product data sheet, never guessed.
Prepare the recess and the conduit
The recess is set when the concrete is poured, or cut afterwards with a core drill. A flexible conduit brings the cable to the housing without pinching it in the concrete, and a layer of gravel at the bottom lets water drain away. Check the available depth before cutting: a recessed spotlight needs room beneath the surface.
The drilling diameter is read on the product data sheet
The useful diameter is not the outer diameter of the housing, but that of the recess specified by the manufacturer. Note this value, add the space for the conduit and confirm the cut before bringing out the core drill. For recess formats, browse the black recessed spotlights and their dimensions.
Concrete spotlights for a wooden patio: how do you install them without damaging the boards?
On a wooden deck, the spotlight is fixed as a wall light on a joist or recessed into a cut-out between two boards, with a gap for water drainage. Avoid drilling through a load-bearing board and prefer a low-voltage model to limit the risks near wood.
Fix on a joist or between two boards
The joist carries the load: that is where a wall light is screwed on cleanly. Between two boards, the spotlight sits in a recess calculated to leave a expansion gap for the wood. The grazing light then outlines the boards and gives depth to the deck, without lighting the void beneath the patio.
Let the water drain away
A wooden deck takes on water and gives it back: the spotlight housing must remain open towards the bottom or the side. Keep a slope beneath the housing and check the cable passage. For night-time circulation, a solution for steps and stairs usefully complements the deck lighting.
Concrete spotlight for a pool patio: what precautions?
Near a pool, splashed water and treatment products require a high protection rating and installation outside the direct splash zone. Favour a low-voltage supply, a protected cable and assembly entrusted to an installer, to stay within safety rules.
The desired effect is understated: a grazing wash that highlights the coping without dazzling swimmers. The exact distance to the coping is confirmed with the installer, who knows the circuit and the type of projector chosen. An adjustable model allows the angle to be corrected after installation.
How do you arrange spotlights on a patio?
First place the spotlights according to use: steps, paths, dining area, pool edge. Regular spacing and crossing beams avoid shadow gaps; better to have a few well-aimed points than many that dazzle. Adjustment is done at night, on site.
Place by use rather than by surface
One point per step, one or two for the dining area, a few to highlight a plant or a border. The same principles apply to lighting a entrance path: identify the walkways before drawing the layout plan.
Spacing on the ground and under a pergola
The higher the source and the wider the beam, the more the spacing can open up. Under a covered patio, align the spotlights with the lines of the structure and keep the points out of the beams' shadows. White adjustable spotlights are adjusted after installation, once the furniture is in place.
What light for a patio in the evening: colour temperature and beam?
A patio works better in warm light, around 2700 to 3000 K, which extends the living room light. A narrow beam highlights a trunk or a step, a wide beam lights a circulation area. Avoid very cool temperatures, reserved for technical areas.
Warm for living, neutral for circulation
2700 K gives an ambience close to incandescent, ideal for dining outside. 3000 K stays warm but sharper, useful on a path. 4000 K suits an outdoor staircase or a technical room. The warm living room light to extend outdoors remains the simplest reference.
Narrow or wide: the beam does the work
A narrow angle marks a step or a trunk, a wide angle lights a passage area without harsh contrast. Dimming to lower the light in the evening softens the whole after the meal, without changing the mounting points.
| Colour temperature | Ambience | Where to use it | To avoid |
|---|---|---|---|
| 2700 K | Warm, close to incandescent | Relaxation area, dining outside | Areas where you need to read or do DIY |
| 3000 K | Warm and sharp | Paths, pool edge | Very high-contrast highlighting |
| 4000 K | Neutral | Stairs, technical room, garage | Patios and dining areas |
Light concrete, tinted concrete, metal: which finish for your patio?
Raw grey concrete blends into a slab or gravel; tinted concrete, on the other hand, matches the window frames or furniture. Metal and stainless steel take their place near a pool or a modern facade. The colour is chosen last, once the location and the light have been decided.
Go for continuity or contrast
A stone-toned housing stays discreet on a light slab; an anthracite housing draws a sharp point on gravel. The same colour logic guides the black finish of spotlights, chosen when the window frames are dark.
Metal when concrete is not enough
Near a pool or a contemporary facade, metal spotlights offer a sharper finish and easy cleaning with a cloth. This colour logic is also applied indoors, for example for kitchen decoration: the finish is matched to the materials already present.
How do you maintain a concrete spotlight and protect it in winter?
A rinse with clear water and a soft brush are enough in spring. Before winter, check the water drainage around the housing, remove leaves and soil, switch off the supply to unused circuits. On concrete, avoid pressure washers and aggressive products that mark the surface.
A visual check of the seal and the cable at the end of the season avoids surprises when switching back on. For treated parts such as metal, a cloth suited to the finish replaces any abrasive product. The rest of the garden is treated the same way: few actions, but at the right time.
Secure payment, tracked delivery, returns and Designix customer service: questions of size or compatibility are settled before ordering. Find all our lighting for the home and garden, or choose from the contemporary design range for a more modern patio.
Frequently asked questions about concrete spotlights for patios
Do you need a transformer for a patio spotlight?
A low-voltage model works with a suitable power supply, often placed in a sheltered spot, while a 230 V model connects directly to the circuit. The choice depends on the distance to the consumer unit, the exposure to water and the space available to house the power supply.
How many spotlights should you plan to light a patio?
Think in terms of use rather than surface: one point for a path, one or two for a dining area, a few to highlight a step or a plant. Better to have a few well-aimed, slightly crossing points than to multiply sources that dazzle.
Can you install a concrete spotlight on a wooden patio?
Yes, as a wall light on a joist or in a recess between two boards, with a gap that lets water flow away. Avoid drilling through a load-bearing board and prefer a low-voltage supply to limit the risks near a flammable material.
What protection rating for a spotlight near a pool?
In a splash zone, the protection rating must be high, and the spotlight placed outside direct splashing. The cable must be protected and assembly entrusted to an installer, who checks the compatibility of the power supply and the safety of the circuit.
How do you clean a concrete spotlight?
Clear water and a soft brush are enough to remove soil and moss. Avoid pressure washers, which mark the concrete and push water towards the housing, as well as acidic products. Checking the drainage around the spotlight completes the spring cleaning.





