Solar motion sensor table lamps
This selection is also available in our French store: Lampes à poser solaires à détecteur de mouvement
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
What table size for how many people?
Which tabletop material should I choose?
Extendable or fixed?
How do I care for the tabletop?
The right furniture, in the right place
Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
These solar motion sensor lights install without cables on a terrace, in a living room or a bedroom. Ribbed base or ovoid shade, beige plastic and metal, warm white LED and IP65 protection: they switch on as you pass.
What light does a solar motion sensor table lamp give?
Expect a warm white between 2700 and 3500 K, the tone of a living room in the evening rather than a cold outdoor white. Detection triggers the light as you pass, with no switch or socket: the light acts as a marker and as ambience, powered by the sun.
A warm white light, close to indoor lighting
The source is an LED, never a classic screw-in bulb: nothing to change, nothing to keep in stock. The warm white tone leans towards a soft yellow, that of a bedside lamp, and not towards the blue of site floodlights. On a terrace, the effect is more welcoming than security lighting. To compare with other sources, browse the design LED table lamps.
What automatic switch-on as you pass changes
No more searching for the switch with full hands, no more leaving a light on all evening. The lamp switches on when someone passes in front of the sensor, then switches off. That is what makes it useful in a terrace corridor, at the foot of an outdoor staircase or on a bedside table, as offered by the LED versions for the bedroom.
Where to install a solar motion sensor table lamp?
On a terrace, a balcony, in a living room or a bedroom: IP65 protection allows outdoor as well as indoor use, and the absence of a cable frees up the location. Place it near a passage, on a ledge or a piece of furniture, where the solar panel receives daylight.
On a terrace or balcony without a power socket
Three conditions are enough: a stable, flat support, the solar panel facing the sky, no obstacle in front of the detection face. A planter, a low wall, the corner of a coffee table will do. IP65 protection withstands water spray and dust, which covers the usual use of an outdoor solar table lamp.
In a living room or bedroom: cordless extra light
Indoors, the lamp does not replace a ceiling light: it provides a movable marker, placed on a console or a bedside table, moved according to use. The art deco beige matches light woods and neutral walls. For a real workspace, turn instead to design desk lamps.
| Location | What the lamp brings | What to check |
|---|---|---|
| Terrace | Light marker as you pass, without a cable | Solar panel exposed to daylight |
| Living room | Ambient extra light in warm white | A stable place on a piece of furniture or a ledge |
| Bedroom | Night light that switches on without searching for the switch | No obstacle in front of the sensor |
| Outdoors | IP65 protected lighting | Seal of the LED area in good condition |
Atrium or Artema lamp: how to choose between the two models?
Both share the same technical base: solar LED, IP65, warm white 2700-3500 K, beige plastic and metal, art deco style. The choice comes down to shape and height: a 40.7 cm ribbed base for the Atrium lamp with ribbed base, a 44.3 cm ovoid shade for the Artema lamp with ovoid shade.
| Model | Height | Width | Shape | Material | Colour | Protection | Light temperature |
|---|---|---|---|---|---|---|---|
| Atrium | 40.7 cm | 27.8 cm | Ribbed base | Plastic and metal | Beige | IP65 | Warm white 2700-3500 K |
| Artema | 44.3 cm | 27.9 cm | Ovoid shade | Plastic and metal | Beige | IP65 | Warm white 2700-3500 K |
The ribbed base, lower and more graphic
Atrium measures 27.8 cm wide for 40.7 cm high: its vertical ribs draw a graphic stem, which sits well on a narrow ledge or a coffee table. More compact, it slips under a window, against a terrace door. A sober companion to the models designed for the living room.
The ovoid shade, taller and softer
Artema rises to 44.3 cm for 27.9 cm wide: the oval softens the silhouette and diffuses the same warm white light. Its height makes it better suited to a bedside table, a hallway console, a terrace low wall. If you are looking for bolder curves, look at the modern lines for the living room.
Can several lamps be connected to a single electrical supply?
Yes, several light fittings can share the same supply, wired in parallel so they switch on together; the number depends on the circuit and the circuit breaker, to be validated by an electrician. With a solar motion sensor lamp, the question does not arise: it connects to nothing.
Wiring several lamps in parallel, how it works
Each light fitting receives the live and neutral of the same line: they all switch on and off together. The limit is not the number of lamps itself but the capacity of the circuit, set by the circuit breaker and the conductor cross-section. It is a point to check, not a calculation to improvise. For a workspace, see the metal models.
Wiring three lamps to a single switch
Three light fittings on a single switch is the same parallel wiring, repeated three times. The connection is made with the power off, and the final check is down to a professional if the circuit is old. Our solar selection avoids exactly this work: nothing to run, nothing to tap into an existing line.
How to arrange ceiling spots and complete terrace lighting?
Spots are distributed evenly, aligned with the areas of use rather than stuck to the walls, and outdoors only with a suitable IP rating. A solar table lamp completes this setup without any work: it provides a movable marker, where a fixed spot does not reach.
Distributing spots by use, not by walls
Spots are placed above what is being lit: a table, a worktop, a passage. Avoid the single point directly overhead, which casts the body's shadow onto the worktop. Keep an even distance between two points to avoid dark patches. None of this applies outdoors to a model without sufficient protection: only a light fitting designed for outdoor use will hold up.
What a movable lamp adds to fixed lighting
A fixed spot always lights the same place. A solar table lamp moves to the table, the deckchair, the stairs, and switches on as you pass without drawing on the outdoor circuit line. It does not replace general lighting, it extends it. Adjustable lamps meet the same need for flexibility, indoors.
Globe lamp, floor lamp, Italian design: which formats for which use?
The globe lamp diffuses widely and suits an ambience; the floor lamp raises the light to reading height; Italian design favours simple lines and materials. Here, the format is a compact table lamp, 40.7 to 44.3 cm high, designed to be moved.
Globe lamp, floor lamp: two formats, two uses
The globe sets an ambient glow, often on the floor or on a low piece of furniture. The floor lamp places the light at armchair or sofa level for reading. Neither is carried from one room to another on a daily basis. An intermediate table lamp, around 27.8 cm wide, can be picked up with one hand and moved according to the time of day. See the Nordic lines for the same restraint in proportions.
Why a compact table lamp rather than a stand
A stand takes up a circle on the floor and requires a nearby socket. A compact lamp of 40 to 44 cm sits on a table, a ledge, a low wall, and works without a cable. It is the format of the light colours that blend into an interior, and of the bedside lamp for the bedroom.
How to maintain an IP65 solar lamp and make it last?
Wipe the solar panel and the shade with a soft, non-abrasive cloth: the charging efficiency and the shine of the beige depend on it. Check the seal of the LED area after a season outdoors, and shelter the lamp if frost is forecast.
Cleaning the panel without damaging the beige finish
Dust and fingerprints on the panel reduce charging: a wipe with a dry cloth, without chemical products or abrasive sponge, is enough. The beige plastic and metal are cleaned in the same way, without scrubbing. A clean lamp charges better and keeps its original appearance longer.
Checking the seals before winter
IP65 protection guards against water spray, provided the seal of the LED area remains intact. Inspect it after a season outdoors: if it is cracked, the lamp should no longer stay exposed. If frost is forecast, bring it inside: plastic and the battery dislike very cold nights and alternating frost and thaw. For other materials, compare with the metal models for the desk.
Which mistakes to avoid before choosing a solar table lamp?
Placing the lamp in the shade, choosing it for a room without daylight, or expecting the power of a connected floodlight from a solar model: these are the three traps. The budget remains that of an accessible model, with no work or wiring to plan.
Shade, the first cause of disappointment
A solar panel in the shade charges poorly, and the lamp switches off earlier than expected. Before fixing the location, observe the path of the day: a covered balcony, a terrace under a thick awning or a recessed ledge will not do. The lamp does not complain, it switches off. A clear location solves most cases.
Solar and connected floodlight: two different uses
An outdoor LED floodlight with motion sensor is used to cover a surface, with sustained intensity and mains power. A solar table lamp serves as a marker and for ambience, with a warm white light and free placement. One does not replace the other. For a discreet addition, look at the black variants for the living room.
Secure payment, tracked delivery, returns and Designix customer service: the order can be tracked, and any doubt about the location is settled with customer service before placing the lamp. Choose your model on the product page, compare height and shape, then add it to the basket.
Frequently asked questions
Where can I find LED solar lamps with motion sensor?
In the full lighting range, the selection of solar table lamps brings together LED models with motion sensor, including Atrium and Artema: beige plastic and metal, IP65, warm white 2700-3500 K. Each product page shows dimensions, material and protection rating.
How do you install a motion sensor on a lamp?
On a solar lamp of this type, the sensor is already built into the light fitting: there is nothing to wire. Simply place the lamp and point the detection face towards the passage area, keeping the solar panel exposed to daylight.
How many lumens are needed to light an outdoor area?
The right level depends on the use: marking a passage, lighting a table or watching an entrance do not call for the same intensity. Here, these table lamps are designed as a marker and for ambience, not as security lighting; the product page of each model gives its exact value.
What is the best outdoor LED floodlight with motion sensor?
A floodlight is chosen on its flux, its orientation and its protection rating, depending on the surface to cover: there is no best model in the absolute. A solar table lamp does not replace it, it provides a movable marker without wiring alongside.
What are the most beautiful living room lamps?
The question is a matter of taste, but a few objective criteria help: consistency of material, accuracy of proportions and quality of light. A beige art deco table lamp, in plastic and metal, provides a warm white light and moves according to the use of the living room, like the models designed for the living room.
