Industrial style wood and metal pendant lights

Allow a ø32 to ø42 cm dome above a table, a compact ball for a seating corner, a wooden frame for a hallway: the shape is chosen according to the room and the hanging height. This selection combines metal and wood in IP20, mostly with E27 sockets, with an adjustable cable up to 130 to 150 cm depending on the reference.

• What is an industrial wood and metal pendant light?
• Which industrial chandelier should you choose for a dining room or living room?
• Which industrial pendant light for a kitchen, bedroom or hallway?
• One, two or three lamps: which pendant light for which use?
• E27, GU10 or G9 socket: which bulb should you choose?
• How do you hang and adjust the height above a wooden table?
• How do you match a wood and metal pendant light with your decor?
• How do you care for a wood and metal pendant light?

What is an industrial wood and metal pendant light?

It is a hanging light fixture that combines a metal frame and a wooden piece: perforated shade, rectangular frame, plate or support bar. Black, silver, white and brown dominate, and the shapes range from dome to ball, including oval and light ribbon. The entire selection is IP20, so it is for indoor use only. To broaden your search, browse the Designix lighting catalogue or the wood and metal pendant lights family.

Industrial chandelier: how does it differ from a pendant light?

An industrial chandelier spreads light across several points, whereas a simple pendant light often has only one. In the selection, this difference shows on models with a perforated shade and wooden socket such as the Albira pendant light at 30 cm, or on the matte black of Althera and its light wood socket, both 15W with an E27 socket.

What is meant by a large industrial chandelier?

The term refers to a wide fixture, with several lamps or a long reach, designed to cover a large table or a tall space. A large industrial chandelier here takes the form of a three-lamp bar, a wooden plate or a 120 cm light ribbon. The length of the table and the ceiling height guide the choice, more than the width of the fixture alone.

Which industrial chandelier should you choose for a dining room or living room?

Above a table, aim for downward light that does not glare: a ø32 to ø42 cm dome, a three-lamp bar or the oval with a ribbed diffuser. The black Ulric dome, ø32 cm with 130 cm of cable, defines a dining room without cluttering it, while the duck blue glass of Canardi (ø42 cm) adds a splash of colour. Warm white 2700-3500 K, available on several references, warms the room in the evening.

What diameter for a large table?

A long table calls for a spread-out source rather than a single point: a three-lamp bar, a wooden plate or a light ribbon. For a shorter table, a ø32 to ø42 cm dome is enough to cover the surface. Complete the look with the models designed for the living room if the open room combines sofa and dining area, and look at the industrial style metal pendant lights when the steel should remain visible.

Is a dimmer useful above a table?

It is used to switch from dining light to a softer mood without changing the bulb. Only part of the selection is compatible, including Galene and its three golden cones, which also offers warm white, neutral white and cool white. The rest of the range can be found in the dimmable pendant lights. Check the mention on the product page before buying the bulb.

Which industrial pendant light for a kitchen, bedroom or hallway?

The kitchen calls for a compact model or a rectangular frame placed above the worktop, the bedroom an oval or a wooden frame for soft light, the hallway a black dome that marks the entrance. The Arielle frame, 24 cm deep and 8 cm wide, works just as well in a hallway as in an office.

Which pendant light for a dining table?

A model with a solid shade or a ribbed diffuser, such as the Brivelle oval (24 x 40 cm, G9 socket), spreads the light and limits glare for diners. In the kitchen, the same principle applies above an island, with a rectangular frame or a short bar. See the wood pendant light for the kitchen and the LED kitchen lighting for worktops.

Which pendant light for a hallway or entrance?

Choose a format that leaves the passage clear: a narrow frame, a compact ball or a short dome. A glass and metal model hangs low and lights widely, which suits a hall. For the bedroom, the oval with a ribbed diffuser and the Arielle frame are content with a discreet warm white. Find these options in the models for lighting a bedroom and the glass and wood pendant lights.

One, two or three lamps: which pendant light for which use?

A single lamp is enough for a reading corner, an island or a small table. Two white shades on wooden stems, such as Dualia, light a medium table. Three lamps on a bar or wooden plate, such as Triada, Conicella or Galene, spread the light along the entire length of a large table, with no shadow between the place settings.

A two-shade pendant light, for which use?

Two light points cover a table for four to six people or a slightly wide entrance. Dualia and its two white shades on wooden stems stays at 15W with an E27 socket, so it is easy to equip. The double format also exists in a wooden LED version, to see in the wooden LED pendant lights.

Three lamps aligned on a bar or spread over a plate?

The bar draws a clean line and suits a long table or an island. The wooden plate gives a more substantial look, with white conical shades or golden cones. The three-lamp Triada model aligns black perforated shades, while the Flamma light ribbon replaces the lamps with a 120 cm wavy source.

E27, GU10 or G9 socket: which bulb should you choose?

The E27 socket takes a standard screw bulb and equips most of the selection. The GU10, a pin spotlight, directs light downwards on the light ribbon model. The G9, a small pin socket, equips the compact Brivelle oval. In all cases, the product page gives the socket before you buy the bulb.

E27: which bulb screws into the socket?

A classic screw bulb, in warm white 2700-3500 K when the reference page specifies it. Galene, however, lets you choose between warm white, neutral white 3500-4500 K and cool white 4500-6500 K. No lumen output is needed for the calculation: start from the desired temperature and the wattage shown on the product page.

GU10 and G9: what are the differences?

The GU10 is a pin spotlight directed downwards: it equips Flamma, in warm white 2700-3500 K. The G9 is a small pin socket, reserved for the compact oval format of Brivelle, whose temperature is not specified on the product page. In both cases, the bulb does not screw in, it clicks in.

How do you hang and adjust the height above a wooden table?

Adjust the cable length before fixing the ceiling rose to the ceiling. Most models hang down to 130 to 150 cm depending on the reference, which keeps the view clear above a wooden top while bringing the light closer. Then check that the fixture stays out of the field of vision of seated people.

How far down does the cable hang?

The Ulric dome goes up to 130 cm, the Arielle frame to 133 cm, the Canardi dome to 150 cm. The Briello ball combines a 10 cm ceiling rose and a 150 cm textile cable. These values are shown on the product page: they depend on the size of the shade, not on a single rule.

How do you fix the ceiling rose depending on the ceiling surface?

A flat ceiling rose is suitable for concrete and solid plaster, with appropriate plugs. On a hollow ceiling, look for a solid anchoring point rather than fixing into the panel alone. Switch off the power at the circuit breaker before working. The warranty ranges from 2 to 5 years depending on the references.

How do you match a wood and metal pendant light with your decor?

Black and silver match an industrial or modern interior, brown and light wood match a Nordic decor, white matches a bright kitchen or bedroom. Golden and amber finishes add contrast. Industrial, modern and contemporary styles coexist in the selection, which lets you keep the same family throughout the room.

Black or white pendant light: which should you choose?

Black reads as a silhouette and structures a light wall or a wooden kitchen. White blends into a ceiling and visually enlarges a small room. Compare the white wooden models with the black and wood versions, and take a close look at the black metal pendant lights if steel should dominate.

A wood and metal pendant light in an already dark interior?

A model with a solid shade or a ribbed diffuser avoids making it darker: the light comes out wider and less contrasted. Light wood, natural wood socket and amber acrylic lift the room. For a warmer look, search among the designer wooden pendant lights and the golden finishes, with Scandinavian inspiration as a clear reference.

How do you care for a wood and metal pendant light?

A soft, slightly damp cloth is enough on the metal shade and on the wood. Avoid abrasive products and stripping, which would remove the protective finish, and never immerse the socket or the cable. Switch off the power at the circuit breaker before any handling. Regular dusting keeps steel and brass clean longer than intensive, occasional cleaning.

Can you strip the wood of a pendant light?

It is not necessary and not recommended: stripping removes the finish and loses the original shade, as on the Arielle frame or the Triada plate. A soft, slightly damp cloth is enough for routine care, without aggressive products or abrasive sponges.

How do you clean a perforated metal shade?

Dust the outer surface first, then wipe with a damp cloth without soaking it. The perforations quickly clog with a greasy spray product, so it is better to spray onto the cloth. Let it dry before switching the power back on.

The choice therefore comes down to three points: the shape according to the room, the number of lamps according to the length of the table, and the socket for the bulb. Take the colour and dimensions from the product page, then confirm the cable height before installation.

• Secure payment
• Tracked delivery
• Returns
• Designix customer service

One last reference point to decide: if the room mixes light wood and black metal, stay with a single family of finishes from the light fixture to the rest of the furniture. To compare the shapes and colours available, return to the wood and metal pendant lights and the lighting catalogue.

Frequently asked questions