RGB table lamps

A colour changing table lamp is a coloured LED lamp that sits on a piece of furniture to create an atmosphere, not to light an entire room: it works as a supplement in the living room or bedroom. The models in this collection are all LED, with a compact white plastic lamp for the bedside and a grey and gold metal tube lamp, IP54 rated, which can also go outside.

What is a colour changing table lamp and what light does it give?

RGB refers to an LED light whose hue can change, shifting from an ambient white to a strong colour. On the models in this collection, the source is LED and the base is LED: no conventional bulb change is planned. Expect accent lighting, the kind you leave on in the evening, not a disguised ceiling light.

Colour changing table lamp or classic LED table lamp?

A designer LED table lamp gives a fixed hue, chosen once and for all: warm white around 2,700 to 3,000 K for a reading corner, neutral white around 4,000 K for working. The RGB model adds changing colour, useful when the room serves several moments of the day. If you simply want a soft, stable light on a bedside table, a fixed-hue LED bedside lamp does the job without adjustment. RGB is justified when the atmosphere matters as much as the lighting.

Powerful RGB lamp: the useful criteria

Be wary of the "powerful" label: on an accent lamp, the size of the diffuser and the position of the lamp decide the result. A tall body like the tube throws light further than a small volume placed low. A nearby white wall reflects the colour and amplifies the effect. Finally, the diffuser material matters: opaque plastic softens, metal frames the light. These three points weigh more than a figure printed on the box.

Where to place a colour changing table lamp in the living room or bedroom?

In the living room, place it on a console or low unit to complement the sofa. In the bedroom, the bedside table is the natural spot for a compact model. The IP54 metal tube lamp can move to a sheltered outdoor area, while the white plastic lamp stays indoors, in the living room or bedroom.

On a bedside table or a living room console

On a bedside table, the lamp must stay within reach and leave room for the alarm clock and the book. A bedroom table lamp is therefore chosen low and stable, so it is not knocked over at the slightest movement. In the living room, the challenge changes: the lamp becomes an object seen from a distance, placed on a console or sideboard. A taller model, like the tube, fills the free height under a frame or shelf. For a more dressed look, look at the living room table lamps, which play on silhouette as much as light.

Can an RGB lamp be placed outside?

Yes, but only with a protected model. The Ondtorena tube model is IP54 rated: it resists dust and water splashes, which covers a covered terrace or a sheltered balcony. IP54 does not mean immersion or driving rain. The compact white plastic Belsia lamp, for its part, does not state a protection rating: it stays in the living room or bedroom. Also think about the connection: an outdoor socket must stay sheltered, under a cover.

How to choose between a plastic and a metal colour changing table lamp?

White plastic suits a compact bedside lamp, easy to slip onto a small table. Metal structures a tube model and brings a more present finish on a low unit. Above all, check the receiving surface and the protection rating: Ondtorena is metal IP54, Belsia is plastic for indoor use.

White plastic for a compact bedside

Plastic wipes clean in one go and does not fear everyday knocks. In white, it visually disappears on a light bedside table and lets the colour of the light fill the space. This is the choice of a white table lamp when you want a discreet object that blends into the decor rather than a piece of furniture. The Belsia bedside lamp follows this logic: a simple, contemporary volume, placed near the bed.

Metal and IP54 for versatile use

Metal gives a more drawn line and a colour that catches daylight. Combined with grey and gold, it accepts a more visible placement, on a living room console or low unit. The IP54 rating also opens up sheltered outdoor use. If you are hesitating between several dark finishes, gold and black finishes pair well with a contemporary living room. And for a work corner, a metal model also fits on a desk, as shown in the selection of metal desk lamps.

Which size of colour changing table lamp to choose for a small space?

For a small bedside table, the compact 11 x 20 cm format leaves room for a book or an alarm clock. The tube format takes more height and dresses a low unit or console better. Measure the available width before choosing, especially if the lamp must stay near the bed.

11 x 20 cm: the bedside lamp that fits on a small table

These dimensions are those of the Belsia model. A narrow bedside table, common in a small bedroom, rarely leaves more room than the width of a book. An 11 cm base fits without overhanging, and the 20 cm height stays below the line of a bedside shade. Still measure the surface: a lamp that overhangs the top falls at the first movement. For other compact volumes, compare with the small ceramic bedside lamps.

The tube format to dress a low unit

A tube takes height, which balances a slightly empty low unit and draws the eye upwards. You must therefore check the free space above: under a shelf or a low-hung frame, the tube quickly meets the decor. On a dining room sideboard or an entrance console, it occupies the vertical without taking depth. This silhouette goes well with a modern living room interior, where lines stay clean.

How to wire several lamps on a single electrical supply?

To wire several lamps on a single supply, switch off the power, then connect the feeds in a junction box with suitable connectors. Each lamp must remain accessible and protected. If you need to work on the consumer unit, entrust the connection to an electrician.

Wiring several lamps in parallel

In parallel, each lamp receives its own supply from the same source: if one fails, the others keep working. This is the logical setup for a set of ambient lamps controlled together. In practice, the feeds meet in an accessible box, never buried in the wall. Use terminals or connectors suited to the cable type, tighten correctly, and close everything up. If in doubt about conductor cross-section or circuit protection, an electrician settles it in a few minutes.

Wiring three lamps to one switch: the logic to remember

A single switch can control several lamps if they are wired as branches on the same control. The control point then runs to each luminaire, not from one to the next. This arrangement prevents a faulty lamp from cutting the supply to the following ones. Identify the conductors before cutting, photograph the original wiring, and work with the power off. The principle remains simple, but execution requires method: in a damp room or near a water point, take no shortcuts.

How to arrange ceiling spots with colour changing table lamps?

Arrange the spots according to the areas to be lit, keeping a regular distance between them and without pressing them against the wall. With a colour changing table lamp, avoid concentrating the spots on the same angle so as not to overlay two coloured lights. Mark the positions on the ceiling before drilling.

Distributing spots without doubling the coloured light

A ceiling is divided into zones: the passage, the sofa corner, the table. Place the spots on these axes rather than in a uniform line along the walls, which lights the wall and leaves the centre dark. If your table lamp diffuses a colour, leave it a quiet angle: two coloured sources on the same point cancel each other out and the result becomes flat. An adjustable model can also replace an extra spot when a single zone lacks light.

Placing the table lamp as a complement

The table lamp provides low light, the kind that comes down and relaxes a room in the evening. Ceiling spots provide work light. By separating them, you keep two distinct uses: ceiling on to move around and tidy up, lamp alone to read or watch a film. Place the lamp opposite the most direct spots, on a side console for example. To vary materials and finishes in the same living room, the selection of ceramic table lamps complements an already equipped ceiling well.

Which designer table lamps for a living room?

For a living room, first choose the use: a compact model on a console, a tube lamp on a low unit or a floor lamp in a corner. Italian style, the ball shape or floor lamps are leads, not obligations. The material and colour must match the furniture that hosts the lamp.

Italian design, ball lamp or floor lamp: how to orient yourself

These three families do not meet the same need. The ball shape wraps the light and suits a soft atmosphere; Italian design relies on clean proportions and a slim body; the floor lamp stands on the floor and frees the furniture. A table lamp remains more flexible to move than a floor model. For a living room already furnished in natural materials, wood models warm up the whole, while a very sober interior goes well with a Scandinavian style.

Matching the RGB lamp with the rest of the living room

When the lamp changes colour, the base must stay neutral. A white, grey or discreet gold lets the light do the work without competition. Avoid adding a second coloured source nearby. The luminaire must also hold its place when switched off: it is an object visible all day. Before confirming, check the free height of the furniture and the length of the cord. To broaden the comparison, browse the Designix lighting catalogue and spot the volumes that resemble yours.

See the Ondtorena tube model or the Belsia bedside lamp depending on the space you have.

How to care for a colour changing table lamp and use it every day?

Unplug the lamp before cleaning it. A soft cloth is enough on the white plastic as on the metal of the tube model. For an IP54 lamp placed outside, check that the plug or connection stays sheltered from water. Do not use abrasive products on the finishes.

Cleaning plastic and metal without damaging the finish

A slightly damp microfibre cloth removes dust from plastic. On a grey and gold metal body, wipe in the direction of the finish and dry immediately: standing water leaves marks. Avoid abrasive sponges and alcohol-based products, which dull surfaces. Once a month is enough in a living room. For easier everyday care, linen table lamps need a soft brushing, and crystal lamps need more meticulous cleaning, piece by piece.

What to check before placing an IP54 lamp outside?

IP54 protects against dust and splashes, not against direct watering or immersion. Place the lamp under a canopy, and keep the plug or connection covered, in a closed box. Check the cable before the rainy season. If you are working on a desk rather than a terrace, a metal model will find its place among the desk table lamps.

Secure payment, tracked delivery, returns and Designix customer service: you order with peace of mind and write to us if any doubt remains about the format or material. To compare all the silhouettes and finishes, all the lighting in the home can be browsed by room and by style.

Frequently asked questions about colour changing table lamps