Touch-controlled LED bedside table lamps

Count on a 5 W LED ring in warm white, from 2700 to 3500 K, dimmable: that is what these touch LED bedside lamps bring to a bedroom. The Anelo II model, in brushed silver steel and 75 cm tall, sits on a bedside table, a desk or a living room side table, rated IP20 so for dry rooms only.

What light does a touch LED bedside lamp give?

These lamps give a warm white light of 2700 to 3500 K with a 5 W LED ring in brushed silver steel. Brightness is set with a dimmer to suit the moment: softer in the evening, stronger for reading. The fitting is LED and the IP20 rating keeps the lamp to dry rooms.

A bedroom light, made for the evening

At the end of the day, the eye copes badly with harsh lighting. Warm white around 2700 K leans towards amber and keeps the room calm; moving up towards 3500 K, the light turns slightly whiter and becomes easier to read by. On the Anelo II lamp, the dimmer does the work: you lower the brightness at bedtime, raise it to read. No bulb to work out, the LED source comes with the lamp.

A glowing ring and adjustable brightness

The ring shape does not only shine upwards: the halo stays diffuse and lights the wall behind the bedside, which avoids the harsh bright spot of a spotlight. For reading, set the brightness fairly high and bring the lamp close to the book; for atmosphere, keep the dimmer at minimum. The same fixture plays both roles, without changing a bulb. To compare with other bedside sources, browse LED table lamps for the bedroom.

One touch is enough to adjust the light: the Anelo II bedside lamp is set with a dimmer, with no app or remote control.

Where to place an LED bedside lamp: bedroom, desk or living room?

The lamp sits on a bedside table, a desk or a living room side table: its 75 cm height makes it a light point above the worktop or the bedside, and its silver ring stays visible even when switched off. Rated IP20, it stays in a dry room.

Next to the screen, on a desk

On a worktop, the lamp takes the place of a decorative object and serves as extra light. Allow for a socket within reach of the cable and run the cord behind the desk rather than in front of the keyboard. For other workstation setups, see LED table lamps for the desk or metal table lamps for the desk.

On a side table or a living room console

In a living room, the lamp plays the part of an object: the brushed silver steel ring stays readable on dark furniture and stands out even when switched off. Place it away from walkways, on a stable surface, at a distance from a sofa so the halo falls on the wall and not in your eyes. See also designer table lamps for the living room.

How to choose a designer and original bedside lamp?

A designer bedside lamp is recognisable by its simple line and the material left visible: here a brushed silver steel ring, a single colour and a height of 75 cm. An original lamp stands out by the shape of its diffuser, not by a pile of functions.

Line first, in the manner of Italian design

Italian design reads in few signs: a recognisable silhouette, metal not hidden, a single colour. The Anelo II follows that logic with its ring and brushed steel, with no visible button or screen. If that is the register you want, compare with the selection of designer LED table lamps and designer models for the bedroom. Other materials change the look completely: ceramic bedside lamps bring a matte, coloured surface, crystal table lamps play with transparency.

Original without falling into the gadget trap

A strong shape is enough. Here, the ring and the 75 cm height stand out from classic bedside lamps, while the control stays simple: a dimmer, nothing more. Conversely, be wary of models that stack a speaker, charger and alarm clock: the lamp becomes a technical object you stop noticing. To decide between restraint and a more striking piece, look at the space available on your bedside: a 75 cm tall ring needs air around it.

Which technical details to check before buying?

Four pieces of information decide the real use: the material, the light temperature, the protection rating and the way it is adjusted. The table below lists the values given for the flagship model, to be weighed against where the lamp will live.

How to connect several lamps to a single power supply?

Several lamps can share one supply: add up their power (5 W per lamp here, so little), check that the extension lead and the circuit breaker can take the total, and avoid stacking extension cords. Each lamp must stay reachable for its switch or dimmer.

Add up the power before plugging in

The sum is simple with low-power LED sources: two or three lamps of this kind stay in modest orders of magnitude. The point to watch is upstream, on the extension lead and the circuit: choose a block suited to the total load stated by the manufacturer, and do not mix it with a demanding appliance such as a space heater. If in doubt about the circuit, have it checked by an electrician.

One socket per lamp remains the safest solution

When the room allows, one wall socket per lamp avoids extension cords at the foot of the bed. For sparsely equipped bedrooms, look instead at adjustable table lamps if you need to direct the light, or at the black metal bedside version for a different look. The Anelo II cable simply plugs into a wall socket, with no fixed installation.

LED chandelier, powerful LED ceiling light or table lamp: which to choose?

An LED chandelier or a powerful LED ceiling light lights the room from above; a touch LED bedside lamp creates a local light point, at table height, for reading or for atmosphere. The two uses complement each other rather than replace each other: ceiling for the whole room, table lamp for the extra light.

The ceiling for general lighting

A powerful LED ceiling light covers a whole room and serves for walkways, cleaning, tidying. It lights a book badly: the light falls vertically and casts the shadow of your hands on the page. That is exactly the gap filled by a table lamp placed at table height. The role of each source is therefore decided when building the lighting plan, not by chance purchases.

The complements of one lighting plan

In a living room, a central chandelier and two low points work better than a single source. A LED wall light sets the mood on a wall, the table lamp moves and adjusts. To build that plan, start from our full range of lighting then refine by room. The pages design for the desk and modern models for the living room give leads for the other light points.

How to match a silver table lamp with the rest of the room?

Silver steel matches light wood, glass and neutral textiles, and contrasts on a dark wall. In a living room, a designer table lamp plays the part of a sculpture: the silver ring stays readable on a side table or a console, without competing with the rest of the furniture.

Play contrast rather than uniformity

On a dark painted wall, the silver ring stands out and becomes the focal point of the room. On a light background, the brushed material takes over: the metal slightly reflects daylight and stands apart from matte white. If you prefer a softer look, designer white colours or linen table lamps change the mood completely.

Brushed steel, wood and textile

Three families get on well with silver steel: light wood (oak, ash), glass and neutral textiles (linen, wool, raw cotton). Avoid adding a third shiny metal on the same piece of furniture. To vary the material while keeping a dark tone, black wood bedside lamps and gold and black colours offer other pairings. And to go towards a more dressed look, see ceramic table lamps.

How to install and care for a touch LED table lamp?

Dust the ring and the stem with a soft, dry cloth, with the power off: brushed steel needs no special product. Installation is limited to placing the lamp on a stable surface and plugging its cable into a wall socket. The warranty is two years on the selection.

Plug in and set the brightness on first use

Place the lamp, check that it does not tip, plug it into a wall socket and find the touch control: a short press switches on, a held or repeated press adjusts the brightness. Start at minimum to judge the halo on the wall, then go up to your reading level. If the dimmer does not respond, cut the power for a few seconds before trying again.

Clean brushed steel without harsh products

A dry microfibre cloth is enough for dust. On a mark, a slightly damp cloth then an immediate wipe: brushed steel marks quickly with abrasive products and standing moisture. The IP20 rating rules out the bathroom and damp rooms; also keep the lamp away from a water point in the kitchen, even if LED table lamps for the kitchen exist for dry worktops.

To choose yours, start from the Designix lighting department then compare heights and materials. The silver LED ring lamp in brushed steel can be ordered online, with secure payment, tracked delivery and returns possible; Designix customer service answers dimension questions before ordering.

Frequently asked questions