Table lamps for workshops

Place the lamp on the workbench, the console or the shelf that borders the station, then angle it so the light falls on the work surface and not in your eyes. These industrial table lamps are in cut crystal, with gold or silver finishes, all IP20 and guaranteed for two years.

Industrial table lamps: how to choose according to the furniture and use?

A workshop table lamp is chosen according to the furniture that hosts it and the surface to be lit: a workbench calls for light close to the work surface, a console a more decorative lamp. The 196 models in the selection are all in crystal and rated IP20, in Baroque, Modern or Bohemian styles, with silver, gold or both finishes.

Workshop lamps: on which piece of furniture should you place it?

On a workbench, the lamp goes at the end of the surface, at hand height, to light the area where you work without casting a shadow on the tool. On a console or a shelf, it lights more broadly and serves first for the atmosphere of the station. All our light fittings are intended for a dry room, and some models designed for the desk are perfectly suited to a tidy workshop, placed next to the notebook and tools.

Which shape to choose: dome, drop, ball, square or tube?

The dome comes first among the shapes in this selection, with light that falls widely over the furniture. The ball lights on all sides and suits an open space, the drop and the square mark a precise corner, the tube slips onto a narrow shelf. These silhouettes are found in the cut crystal table lamps, where the faceting throws the light back onto the work surface.

Floor lamps or table lamps: what to choose for a workshop?

A floor lamp takes up the floor and lights a large area; a table lamp sits on a piece of furniture, moves with one hand and frees the passage. In a cluttered workshop, it slips as close as possible to the task, where a stand would struggle to find its place.

The real criterion is the height of useful light. A stand lights high and far, practical for sweeping a large table, but it needs floor space and a socket nearby. A table lamp requires no fixing and gets closer to the gesture: you shift it a few centimetres and the shadow disappears. If the station often changes configuration, the adjustable table lamps do this work without moving the base. For a workshop with sober decor, the lines of the Nordic models hold the furniture without cluttering it, to see in our lighting catalogue.

Baroque, modern or bohemian style: what effect for a table lamp?

The style does not change the function but the way the lamp occupies the furniture: pendants and pleated shade for baroque, sober lines and a straight base for modern, faceted crystal and an openwork structure for bohemian. Gold and silver combine with these three families.

Italian design table lamp: which codes to recognise?

Italian design can be read in the worked base, the stepped tiers, the fine arms and the hanging pendants. The Lorvesano and its cut crystal base gives a clear example, like the Cristallin, three arms and red bobèches, which fully embraces the baroque reference. These codes are found in the faceted crystal models and in the modern table lamps for the living room when the base stays straighter.

Crystal or brass lamp: what is the difference?

Cut crystal throws the light back in splinters and lights the furniture by reflection; brass, rarer in this selection, gives a warm tone and a fine structure. On a work station, crystal stands out more when lit, brass stays discreet when off. Both are cleaned the same way.

How to connect several lamps to a single electrical supply?

Several table lamps can share the same supply through a power strip or a socket block: you then add up the power of the bulbs installed and check that the circuit supports the whole. For a fixed or recessed connection, it is better to entrust the work to an electrician.

In practice, you group the lamps of the same station on a protected power strip and keep the cables along the furniture rather than across the passage. Choose bulbs of moderate power: in a workshop, several weak sources distributed light better than a single strong source, and the crystal throws this light back onto the work surface. The LED versions for the desk give off little heat and suit prolonged use well.

Lighting for the toilet and decoration for the toilet: which table lamp?

In a toilet, a table lamp on a shelf or a high ledge gives accent lighting without drilling the wall. These models are IP20: they are therefore placed in a dry room, outside splash zones, and a compact shape is preferred so as not to clutter.

Toilet light fittings: which shape to favour?

A low and tight shape, square or ball, fits on a ledge a few centimetres wide. Look in the white design models for the shade that blends into a small light-painted volume; white recedes, gold stands out more.

Toilet light fitting: why indirect light?

Seated in a small volume, you often look towards the opposite wall: a source that is too direct dazzles. A lamp with pendants or a shade diffuses light upwards and sideways, and the eye never meets the bulb. The crystal lamp collections offer this type of diffusion.

Living room chandelier or large chandelier for a high ceiling: what to replace them with?

A chandelier hangs from the ceiling and lights the room from above; a table lamp is placed on a piece of furniture or a console, with no drilling or hanging height, and brings the light closer to use. The two can coexist: the chandelier gives the general atmosphere, the table lamps light a precise corner.

Large chandelier for a high ceiling: what alternative without drilling?

When the height discourages hanging or when the ceiling void is already equipped, two or three table lamps placed high on a shelf or a dresser compose a dense point of light, without a ladder or fixing. For a living room, the modern table lamps for the living room hold this sober line; for a bedroom, the accent lamps for the bedroom do the same work on a bedside table.

Can you keep a chandelier and add table lamps?

Yes, and it is often the best arrangement. The chandelier stays on at the start of the evening, then you turn it off and switch to the table lamps for low light, close to the furniture. The light then becomes visually warmer, without changing the bulb.

Decor for a modern kitchen: how to integrate a table lamp?

In a modern kitchen decor, a table lamp is placed on the work surface, an open shelf or a sideboard, away from splash zones since these models are IP20. A gold or silver finish in cut crystal creates a clear point of light, useful when the general lighting is dimmed.

Where to place it on the work surface?

At the end of the surface or on the corner return, never under the tap or against the hob. The lamp then lights the coffee corner or the sideboard, and serves as a night light when the kitchen becomes a dining room. A compact model in square or tube form takes up little depth, which matters on a narrow surface.

Table lamp for the living room or kitchen: how to match it?

You repeat the finish of the handles or the taps: gold with gold, silver with stainless steel. If the kitchen is already very colourful, the lamp remains the only metal on the surface. The gold and black finishes work well on a dark surface, and for a very light decor, you can also look at the design table lamps for the living room, which share the same bases.

How to care for a crystal and brass table lamp?

A soft dry cloth is enough to dust crystal as well as brass; for the facets and pendants, you limit yourself to a diluted mild cleaner and wipe immediately. No solvent, no abrasive: these finishes are guaranteed for two years but do not like aggressive products.

How to clean the pendants without damaging them?

You dust them in place, one by one, with a microfibre cloth or a soft brush, without unhooking them. If they are greasy, a cloth barely damp with diluted cleaner, then an immediate dry wipe. The Valvesissa and its silver pendants illustrate this type of piece where care must remain light.

Does brass require a specific product?

No. A soft cloth is enough to keep the shade; a product that is too harsh removes the patina and leaves light marks. For a more thorough restoration, a mild metal product, applied away from the crystals and rinsed, remains the reasonable limit. The design LED table lamps share this same requirement for dry cleaning.

Frequently asked questions

Ordering from Designix

One last reference point before choosing: measure the free depth of your furniture and the distance between the lamp and the wall, then check that the cable reaches the socket without crossing the passage. The Zenvesella with pleated shade suits a narrow surface, like the other pieces in our modern black selection or all Designix light fittings.

Secure payment, tracked delivery, possible returns and Designix customer service for any question about a dimension or a finish before ordering.