Dining Room Wall Light

Plan one wall light for each area you need to light: one on the wall alongside the table, one on either side if the sideboard takes up a long wall. The whole selection is IP20, LED, in aluminium or steel, with a warm or neutral white light at face height. The grid shows each model's current price.

What is the best lighting for a dining room?

A dining room is lit in three layers: a source above the table, a light at face height, a discreet extra. The dining room wall light takes the second role: it lights the people seated and leaves the tabletop free. Warm white suits evening meals, neutral white suits a room open to the kitchen.

Dining room light: why light at face height

A source only on the ceiling hollows out features and casts shadows under the plates. By bringing the light down to eye level, you light faces and make the table readable without turning up the power. Our lighting catalogue reads in that logic: each piece is chosen for the layer it occupies.

Dining room pendant or wall light: the role of each source

The pendant structures the room and lights the table from above. The wall light completes it from the side, without crossing faces. In a narrow dining corner, it can remain the only source. Browse all our wall lights and compare colour temperatures before fixing the pendant.

Where to place a wall light in a dining room?

Place it on the wall alongside the table, about a metre from the edge of the top, or on either side of the sideboard. A tall model dresses a narrow wall between two openings, a compact format fits near a dining corner. The back wall lights the room without crossing faces.

Living room dining room wall light: the wall alongside the table

In an open room, the same wall light serves both areas. Place it at the end of the table rather than in the centre: the light runs along the wall and lights the guests at an angle. The principles of living room wall lights apply here, with profiles that stand out only 4 to 8 cm.

Dining room wall light: sideboard side or back wall

Two wall lights framing a sideboard give symmetrical lighting. On a back wall, one is enough to warm the room. If the room opens onto the kitchen, the kitchen wall lighting continues the same writing, and the hallway wall lights carry the pattern through to the table.

At what height should a dining room wall light be placed?

Start from the height of the model, not a fixed dimension. Tubes of 150 to 151 cm come down near the tabletop, versions of 88.5 to 120 cm sit at table level, formats of 30 to 60 cm are installed above a sideboard or a worktop. The useful reference is the source, not the edge of the fixture.

Start from the actual height of the model

A tabletop is generally around 75 cm from the floor. A 151 cm wall light mounted 60 cm from the floor places its source above the table. A 30 cm wall light sits higher, at shoulder level, to light a face. The same model can then serve as a bedroom wall lamp, with an adapted height.

Avoid dazzling seated guests

A source in the line of sight is tiring. Shift the wall light towards the front of the table, or choose a model whose LED is hidden by the profile, such as aluminium tubes. For a directed beam, GU10 versions can be adjusted after installation, once the table is in place.

Powerful LED wall light or soft light: which power to choose?

Power comes after colour temperature. The selection runs from 8 W to 22 W: 8 to 15 W for an extra or a table for four, 20 to 22 W on a large wall or in an open room. Warm white from 2700 to 3500K accompanies meals, neutral white from 3500 to 4500K gives a crisper light.

Watts and colour temperature

A 10 to 15 W model in warm white covers a table for four to six. Reserve 20 to 22 W for long walls or volumes open to the kitchen, where the light must also feed the neighbouring area. An IVAR LED 3000K Wall Light of 14 W holds that role on a side wall.

How far to go without dazzling

The higher the power, the more orientation matters. A strong source placed in the line of sight is uncomfortable; the same one, shifted or fitted with a deflector, lights without discomfort. On a very light wall, the light bounces and a moderate power is enough. White versions behave this way, while black finishes absorb more and need a little more wattage.

What are the trendy lights for a dining room?

Simple shapes dominate: vertical tubes, discs and squares, in aluminium or steel, in black, white, beige or green. The chic country wall light spirit plays on soft shades, matt material and a warm white from 2700 to 3500K, never on heavy decoration. Modern wall lights follow this movement.

Designer dining room wall light: tubes and minimalist lines

The vertical tube is the most common shape: a profile 4 to 8 cm deep, it slips between two openings and follows the vertical of the wall. This family joins the metal wall lights, often in aluminium, with a disc or a square as the only break. For a dressier corner, gold accents for the table bring a warm touch without overloading.

Chic country wall light, beige and taupe for a dressed table

A set table supports a muted wall: beige, taupe, green. These shades erase the fixture and leave the tableware in the foreground. A warm white completes the whole. Find this register on an AKE 50 Wall Light in steel and glass, available in several round colours.

Large dining room wall light: which size and shape to choose?

Choose the place first, then the size. On a clear vertical wall, a tube of 88.5 to 151 cm occupies the height. On a wide wall, a disc or a square spreads the light. Between two doors, stay with a narrow profile. No wall light in the collection is waterproof, all are IP20.

Large dining room wall light: vertical formats

A 151 cm tube, such as the LAGOM 150 LED 4000K Wall Light, requires available height and stands alone on a bare section of wall. Its 4 cm depth makes it compatible with a busy passage. These are the indoor wall lights that are easiest to slip into a service corridor.

Original wall light: round and square

A 30 cm disc lights widely and stands out only 3.5 cm from the wall. A 50 cm version in steel and glass becomes a motif in its own right, to be reserved for a wide wall. To direct the beam towards the table, the FREYA 90 Wall Light in steel takes an adjustable GU10 bulb.

Dining room wall light in wood, metal or glass: which material to choose?

This selection mainly combines aluminium and steel, with a little glass and plastic. Aluminium dominates on fine LED tubes, steel and glass on round models with a visible bulb. A wood effect is sought in the beige, taupe or brown shades, not in a wood material.

A wood effect through the shade, not the material

Wood is not among the materials offered. To approach that finish, combine a narrow profile with a beige, taupe or brown colour on an aluminium model, whose light grain remains discreet. Glass wall lights play another register, brighter and more graphic.

Care of aluminium, steel and glass

A soft cloth is enough to dust aluminium. On steel and glass, use a non-abrasive product, without solvent, and never a scraper. Cut the power before any work on a model with a replaceable bulb, and let the source cool.

How to install and maintain a dining room wall light?

A wall light is wired like a standard light point, outside wet areas. The whole selection is IP20, so reserved for dry interiors. Maintenance is limited to dusting. The warranty covers five years on all the models offered.

Dining room LED wall light: connection and IP20 rating

Connection is made on a flush box, with the power off, respecting the live, neutral and earth markings. IP20 protects against fingers and solid dust, not against moisture. For a wet room, turn to the models designed for the bathroom, intended for another use.

Changing the bulb of a GU10 or G9 wall light

The FREYA take an adjustable GU10, the BISCUIT and AKE 50 a G9. The rest is integrated LED: nothing to replace, the temperature being fixed at purchase. For a designer wall lighting with a replaceable source, these two families are enough. A model such as the JORUN LED 4000K Wall Light remains, for its part, in integrated LED at 8 W.

What budget to plan and which Designix services?

The budget reads in relative tiers: simple aluminium tubes, models with a worked diffuser, then pieces in steel and glass. The current price is shown on each product page. The deciding factor remains the colour temperature and the installation height, not the amount shown.

For a tight budget, the affordable models do the job on a side wall. Conversely, a glass and steel disc is chosen as a decorative piece. In both cases, compare the shape and the source first.

• Secure payment
• Tracked delivery
• Returns
• Designix customer service

Before ordering, check two things: the height of your tabletop and the colour temperature of the room. Browse all the lights for the home to place the wall light in the whole, then open the page of the chosen model.

Frequently asked questions