Adjustable black cinema spotlight, industrial pendant light | Cinéa

The Cinéa cinema spotlight lamp transforms a corner of your interior into a film set. Inspired by 1960s studio spotlights, its cylindrical matte black metal head with adjustable flaps (the famous “barn doors”) diffuses a warm, directional beam, enhanced by its golden interior reflector. Suspended above an island, a desk, or a gallery wall, it adds a true industrial signature.

• Tiltable and swiveling head: direct the light exactly where you want it, just like a stage spotlight.
• Adjustable cable up to 150 cm: adjust the height during installation, from low ceilings to high vaulted spaces.
• E27 socket, 40W maximum: compatible with a decorative filament bulb to enhance the vintage feel (bulb not included).
• Dimmer compatible: when paired with a wall dimmer, it transitions from task lighting to a dimmed atmosphere (dimmer not included).
• Golden interior reflector, matte black finish, 2-year warranty.

This industrial pendant light is full of character: use it alone above a work surface for a spotlight effect, or installed in a series along a hallway to create a sense of rhythm. Its cinema projector look fits just as well in a raw loft as it does in a contemporary living room with a bold decorative touch.

Installing the cinema spotlight lamp

The Cinéa cinema spotlight lamp attaches to the ceiling via its 10 cm diameter round base (screws and anchors included). Allow for about fifteen minutes: fix the base, connect the two wires to the 220-240V power supply, hang the projector, and then adjust the cable length up to 150 cm. Then, screw in an E27 bulb of 40W maximum and orient the head and flaps toward the area you wish to light.

Maintenance

Dust the metal body and flaps with a dry microfiber cloth while the light is off and cooled down. Avoid abrasive products that could mark the matte black finish. The golden reflector can be revived with a simple wipe from a soft cloth. Handle the adjustable head gently to preserve the joint.

Is the cinema spotlight lamp supplied with a bulb?

No, the bulb is not provided. The Cinéa cinema spotlight lamp accepts an E27 socket bulb of 40W maximum. For a look faithful to the studio spirit, choose an amber filament bulb; for more powerful and energy-efficient lighting, a warm white E27 LED is perfectly suitable.

Can the beam of this hanging projector be adjusted?

Yes. The head of the cinema spotlight pendant tilts and pivots, and its four flaps fold or spread to frame the light. You can direct the beam toward a painting, a work surface, or a wall, exactly like a stage spotlight.

At what height should the cinema spotlight lamp be installed?

Thanks to its adjustable cable up to 150 cm, you can adapt the height to the room. Above an island or a table, leave about 70 to 80 cm between the bulb and the surface; for a wall spotlight effect, mount it higher and tilt the head toward the area you wish to highlight.

Also discover our industrial pendant lights, our industrial lighting, and our LED spotlights. In the same workshop spirit: the Oaro black industrial pendant light, the Bikkel industrial pendant light, or the Lilo metal chandelier.