Designer wooden wall lamps

Plan one wall light per area to light: an adjustable one near the worktop, a pale wood ball above the bed, a slim profile in the hallway. Wooden wall lights combine a wooden structure with an LED source rated IP20, with a G9, E27, GU10 socket or an integrated LED. For a symmetrical installation on either side of the bed, packs of 2 wall lights are available, with matching finishes.

• Which wall light for which room
• Lighting well
• Sockets and wattages
• Installation
• 2026 trends
• Damp rooms
• Care

Which wooden wall light should you choose for which room?

The living room calls for a wide or adjustable model that lights a whole wall, the bedroom a soft wall light placed near the bed, the hallway a slim vertical format, the kitchen a spotlight aimed at the worktop. Wood remains the common thread, steel or aluminium bring the contrast.

Wooden wall light for the living room

On a large wall, the Orlo ball wall light (G9, 8 W, W 25 cm, D 6 cm, H 67 cm) acts as a lamp in its own right. A wooden model for the living room blends with the furniture and complements a central pendant rather than replacing it. The Orina wall light, round and white with a marble effect, is dimmable.

A wooden wall light for the bedroom, near the bed

On either side of the bed, two wall lights placed at reading height light without waking the other person. The Boisa wall light with exposed socket (E27, 15 W) lets you choose the bulb, while the Harper wall light hangs down to 55 cm on a textile cable. See also lighting a wooden bedroom.

Hallway, entrance and kitchen: small wall formats

A tubular profile 5 cm wide such as Tubara slips along a narrow hallway at shoulder height. In the kitchen, the Eldora spotlight (GU10, 10 W) aims at the worktop and is adjusted by hand. For other layouts, see lighting a hallway.

Which wall light for good lighting?

An adjustable wall light sends the light where it is needed: onto a worktop, a painting or an armchair. A wall light with fixed diffusion lights more broadly and serves as ambient light. The whole selection is LED, with wattages from 5 to 15 W depending on the model.

Adjustable wall light or fixed diffusion, which light?

The adjustable head (Eldora, Alaranilo, Vexor, Quercor, Quercus) is set once and for all towards the useful area, then stays put. Fixed diffusion (Orlo, Yareli, Ariranano) washes the wall and floor without being touched. Choose adjustable for a specific task, fixed to dress a room. The designer LED wall lights cover both cases.

Wood and metal, wood and glass: what the material changes

A glass globe softens the light, steel concentrates it, pale wood warms it. A designer wooden wall light in natural wood ages beautifully and matches the floors; the wood and metal versions bring a workshop contrast. For a lighter look, the wood and white finishes brighten a dark wall.

How to choose between a G9, E27, GU10 socket and an integrated LED?

The G9 socket fits compact and decorative wall lights, the E27 takes the most common bulbs, the GU10 suits adjustable spotlights, and the integrated LED cannot be replaced but remains the most discreet. The whole collection runs on LED and stays rated IP20.

G9, E27 or GU10 socket: what it changes day to day

The G9 is the most common in the selection and fits in a small globe: handy when the wall light is narrow. The E27 offers the most latitude, including swapping one bulb for another. The GU10 is aimed and replaced without tools. The E27 wall lights concern models with a visible socket.

Designer halogen or integrated LED, what to choose today?

A G9 or E27 socket long took a designer halogen bulb: the same socket now takes an LED, with less heat near the wood. The integrated LED cannot be replaced but shows the flattest profile, like the Davora wall light (W 30 cm, D 5 cm).

How to install a wooden wall light?

Switch off the power at the breaker, identify the wires, drill with plugs suited to the surface, then connect before screwing on the backplate. The height depends on use: near the bed for reading, above a worktop, at shoulder height in a hallway.

What height to install a wall light?

Allow around 1.20 to 1.40 m from the floor for a reading wall light, and 1.60 to 1.80 m to light a worktop. In a hallway, shoulder height avoids glare. Above all, check the actual footprint: a profile 5 cm wide is not installed like the Orlo ball, 67 cm high.

Drilling into solid wall, plasterboard or wood

On a solid wall, an expansion plug is enough. In plasterboard, use a toggle or Molly plug, as a wood and steel wall light weighs more than an aluminium model. On a wooden partition, a direct screw works. Connect with the power off, then switch the breaker back on and test.

What are the trends for wall lights in 2026?

In 2026, the wall light is all about material: pale wood, black steel, marble and concrete sit alongside slim tubular profiles. Square and tube shapes are growing, discreet LEDs replace visible sources, and the wood and white duo remains the most common in the selection.

Designer wall light in natural wood and raw materials

Pale oak dominates, as on the Quercor adjustable pale oak wall light, often combined with a grey concrete cube or a marble effect. The Scandinavian-inspired models play the same card, with softer lines and a diffusing globe.

Wood and white or wood and black wall lights, which finish?

White visually enlarges a small wall and disappears in a pale room. Black underlines a shape and holds up better on a dark background. The black wood wall lights and the all-black models are often placed on brick or concrete walls.

Wooden wall light in a damp room or outside, is it possible?

No for this selection: all models are rated IP20, meaning protection against contacts and solid dust, with no resistance to moisture or splashes. A bathroom or a terrace requires a higher protection rating, to be checked model by model before purchase.

What IP20 means in a bathroom

IP20 protects against fingers and solids, not water. A wall light from this collection can therefore be placed in a toilet or a shower room, away from the sink and the shower. For an exposed area, look at the damp room pieces and the black models for bathrooms, better protected.

Where to place a wooden wall light indoors

A wall light for toilets goes above the mirror or on the free wall, never within direct reach of the water point. In dry interiors, the hallway, entrance, staircase and bedroom take these wall lights without reservation. For outdoors or a terrace, another rating is needed, as on the designer outdoor wall lights.

How to care for a wooden wall light?

A soft dry cloth is enough for wood as for aluminium. Avoid abrasive products, standing water and sprays applied directly to the surface. Switch off the power before handling an adjustable head or changing a bulb, and clean the glass separately.

Cleaning a pale wood wall light without damaging it

Dust dry first, then wipe with a slightly damp wrung-out cloth, never soaked. The glass of a globe can be removed and washed separately. Finish by checking the fixing screws, as a heavy wall light such as Orlo needs a well-tightened backplate.

Reviving a brown or black wooden wall light

On brown wood, a clear oil nourishes the grain without tinting it. On a black finish, a microfibre cloth is enough and any solvent is avoided, as it would leave matt marks. The dimmable models are cleaned the same way, switching off the power before any handling.

Payment is secure, delivery is tracked, and returns stay simple if a format does not suit once installed. Designix customer service answers before ordering to compare two dimensions, two sockets or two finishes.

Frequently asked questions

To compare this family with the rest of the catalogue, browse all our designer lights and the designer LED wall lights: you will find the same sockets, the same wood finishes and the same dimensions given above.