Black metal wall lamps

Count one sconce per area to light: an 8 W model with a G9 base for a reading corner or a bedside, a 10 W with an E14 base in a hallway, a 15 W with an E27 base on a large living room wall. The whole selection is in black steel, LED-equipped, rated IP20 for dry rooms.

Which black metal wall sconces should you choose for each room?

In the living room, a black metal wall sconce in LED steel of 8 to 15 W lights a wall or a reading corner. In an adult bedroom, it replaces the bedside lamp and frees up the nightstand. Kitchen and hallway call for directed light, aimed at the worktop or at the walkway.

Which wall sconces for the living room?

On a long wall, two aligned sconces are better than a single one in the centre. NOX 1 and NOX 2 measure 61 and 80 cm in length respectively for 30 cm in height, in steel with a 10 W E14 base: their elongated shape follows a sofa or a low unit without competing with it. The NOX 2 sconce with switch saves you getting up to turn it on. To go further, see the LED sconces for the living room.

Which wall sconces for an adult bedroom?

You want a close, soft light, not room lighting. TALASSA reaches 31 cm for 13 cm in width and stays discreet on each side of the bed, with a 8 W G9 base. Narrower still, PASTELO 2 fits within 5 cm in width by 50 cm in height, useful when the wall is cluttered. The LED sconces for the bedroom category gathers these formats.

Which black wall sconce for which room?

This table crosses rooms with the shapes and bases actually available in the collection.

Which wall sconces should you choose between solid black, black and white or black and wood?

Solid black steel goes with almost every wall and stays discreet. Black and white plays on contrast in a bright room. Black and wood brings a warm note. The collection also offers versions where white replaces black on the same shape, depending on the room and the wall.

Black and white metal wall sconces

The black and white duo is mainly used to mark a line: a black sconce on a white wall draws its silhouette, a white sconce on a dark wall does the opposite. VANTA, YOLI 1, ELBA and TONI come in both colours, which lets you equip two walls of the same room with a different result. Light finishes also lead towards the white wood sconces.

Black and wood metal wall sconces

Steel carries the structure, wood warms the wall. TIMBO, EMBER, ZUCA and FAGER 1 combine the two materials, with a 15 W E27 base for the first three and a 10 W GU10 for the last. VERDO takes the same idea in 10 W with a dimmer. To compare the variants, browse the black wood sconces and the wood and metal models.

The pairing of steel and glass plays another role: ASTRAL 1 and YOLI 1, with an 8 W G9 base, diffuse through a glass surface that softens the light point. The smoked glass sconces show this result.

What are the trends for wall sconces in 2026?

The collection moves towards simple shapes: slim tubes, squares and discs in black steel. LED equips the whole selection, the built-in switch and the dimmer appear on several references, and the steel-wood mix keeps its place in Nordic and industrial interiors.

Designer black metal wall sconces

What dominates are long, flat formats: a tube, a slim rectangle, a disc. Original shapes and tubes make up most of the silhouettes, squares follow, then rounds and balls. LEVAR and VECTOR stay in this spirit with a compact body under 20 cm in height. The black designer current gathers these pieces.

High-end designer wall sconces: what makes the difference

The difference shows in three points: how the matte black steel holds up, the finesse of the joins between two materials, and the presence of a dimmer. ZUCA and VERDO have one. The 5-year warranty covers the whole selection and counts for more than a passing trend. See also the designer LED wall sconces and our full range of lighting.

What light does a black wall sconce give: which base and which wattage?

The models in the collection use four bases: G9 and E14 for the low wattages of 8 and 10 W, GU10 and E27 for 10 and 15 W. G9 and E14 suit close-up accent lighting, E27 takes wider bulbs, GU10 projects a directed beam.

G9 and E14: small points of light

G9 is a small pin base: it gives a fine point of light, almost without halo, which makes it suited to a wall, a picture or a bedside. E14 is a small screw base, easier to replace, for a soft light in a hallway. VANTA, TALASSA, TONI and PASTELO 2 use an 8 W G9, NOX 1 a 10 W E14.

E27 and GU10: choosing your bulb

E27 takes standard screw bulbs and diffuses more widely: TIMBO, EMBER, LEVAR, ELBA and VECTOR are in this family, at 15 W. GU10 is recognisable by its directed beam, useful above a worktop; FAGER 1 and VERDO use it at 10 W. Compare the E27 base models with the LED kitchen wall sconces.

A small share of the references takes a dimmer, which changes how you use it in the evening without changing the light fixture. The dimmable wall sconces gather these models.

Art deco sconces and antique wall sconces: how do they differ from contemporary black metal?

The 1930s art deco sconce is recognisable by its geometric lines, its materials such as brass or glass, and its stepped shapes. A contemporary black metal wall sconce stays more understated: steel, fine line, direct light. For an older interior, a period piece or a reissue is a better fit.

1930s art deco sconces: the codes to recognise

Three signs recur: a fan or stepped motif, a mix of gilded metal and frosted glass, a short stem that presses the fixture against the wall. A black steel model does not reproduce this vocabulary, even if it sometimes shares the stepped silhouette. For a warm, gilded result, look instead at the gilded brass sconces.

Where to look for an antique wall sconce

An antique piece requires checking the base, often a screw model no longer made new, and the condition of the metal around the bulb holder. These checks explain why a contemporary black steel sconce, with a 5-year warranty and LED, is simpler to make last. The vintage metal wall sconces offer a middle ground between the two worlds.

How do you install a black wall sconce in a staircase, a hallway or an entryway?

On a staircase, you repeat the same sconce at each level to rhythm the climb and light the steps. In a hallway, you align it at eye level, on either side of a door. In an entryway, a sconce with a built-in switch saves you hunting for the button in the dark.

Staircase wall sconces: how do you align them?

The reference point is the nosing line of the steps: each sconce goes at the same distance from the edge of the steps, from one landing to the next. You keep the same model, often a compact format with an 8 W G9 base, so the eye follows a series and not different objects. PASTELO 2 and TONI suit this use thanks to their slimness.

Entryway wall sconce with switch: the right reflex

Putting the switch on the fixture itself changes how you use it: you come in, you press, without crossing the room. The NOX 2 sconce works this way, with a 10 W E14 base. In a hallway, cross the modern hallway sconces with the sconces for toilets for small spaces.

Can you install a black wall sconce in a bathroom?

The sconces in this collection are IP20: they are intended for dry rooms and must not receive water splashes. In a bathroom, you therefore need a model whose protection rating suits the zone, or keep the black sconce for the dry wall of the entryway and hallway.

Black designer bathroom sconce: which IP rating should you choose?

The IP rating is read zone by zone: the closer you get to the bathtub or the shower, the higher the protection must be. In practice, you keep an IP20 model out of these volumes and away from splashes. The black sconces for the bathroom indicate the models designed for these rooms.

What alternatives for a damp room?

Two options: a model dedicated to the damp room, or a protected outdoor fixture that can be placed inside a wet zone. The LED bathroom lighting and the black outdoor sconces cover both cases.

Black industrial chandelier or black living room chandelier: should you choose a wall sconce instead?

A black industrial chandelier or a living room chandelier lights from the centre of the room; a wall sconce lights a wall, a walkway or a specific area. The two complement each other: the central fixture sets the mood, the black sconces dress the walls and avoid dark zones.

Black industrial chandelier: what sets it apart from a wall sconce

The chandelier diffuses downwards from the ceiling and lights the table or the whole room. The sconce stays lateral: it draws a cone of light on the wall and accompanies the walkway. When the chandelier is hidden by a piece of furniture or a corner, two 15 W E27 sconces, such as LEVAR, take over. The black industrial style extends this logic.

What budget should you plan for a black metal wall sconce?

The cost depends mainly on the number of points to equip: a compact model in steel alone costs less than a piece in two materials with a dimmer. It is better to spread the sum over several small aligned sconces than to concentrate it on a single one. The full lighting catalogue lets you compare shapes before settling on a number.

Frequently asked questions

A black steel sconce chosen for the right room and the right base is installed once and kept. Steel, steel and wood and steel and glass hold up over time. If you hesitate between two formats, compare the actual heights: 31 cm for TALASSA, 50 cm for PASTELO 2, under 20 cm for the black LEVAR sconce. The choice is decided there, not in the photo.

Secure payment, tracked delivery, easy returns and Designix customer service: you order the right sconce, and if the format does not suit the wall, you send it back. See the TIMBO steel and wood sconce, the black ZUCA dimmable sconce or the VERDO wood and black sconce to finalise your choice.