Recessed ceiling lights

Count on a single light point fixed to the ceiling, with no cable hanging down into the room: a recessed ceiling light shines downward and blends into the background. This collection brings together 10 W LED models, with an E14 base on almost all of them, IP20 rating, for a living room, bedroom, kitchen, hallway, dining room, entryway or office.

What is a recessed ceiling light and which room should it go in?

A recessed ceiling light is fixed to the ceiling, with no pendant or visible cable, and directs light downward. The entire selection runs on LED, at 10 W on almost all references, an E14 base on 97% of models and an IP20 rating throughout. The rooms listed in the product sheets are the living room, bedroom, dining room, kitchen, hallway, entryway and office.

Recessed ceiling spots and ultra-flat recessed spots

Two families coexist. Globe models, such as the Ula ceiling light with its curved arms (65 cm wide, 15 cm globes), take up the ceiling and structure the room. Ultra-flat versions need only a few centimetres of height, like the Cyril ceiling light with golden rods, useful under a low ceiling or in a hallway. You will find both approaches in the range of recessed LED ceiling lights.

Why outdoor and bathroom areas need a different protection rating

The IP20 rating indicates protection against solid objects and contact, with no resistance to water or moisture. These models therefore stay in dry locations. For a bathroom, look at damp areas and bathroom pieces, designed for that use.

What kind of light does a recessed LED ceiling light give?

The result depends on two things: the diffuser material and the colour temperature. An opal globe diffuses a soft, enveloping light and hides the source; smoked glass lets the bulb show through and makes more of a statement; a panel with a frosted diffuser lights more widely and evenly. Colour temperature is only specified on a minority of references, with warm white and cool white on the panel version.

Warm white 2700-3500 K or cool white 4500-6500 K: which to choose?

Warm white (2700 to 3500 K) suits relaxation rooms: bedroom, living room, dining room. Cool white (4500 to 6500 K) gives a more neutral light, appreciated in an office or over a worktop. These ranges are the usual industry benchmarks; in this collection, warm white (2700-3500 K) and cool white (4500-6500 K) are documented on only a small part of the selection, including the panel model. For a warm interior, modern living room ceiling lights stay in that soft tone.

Do 1000 lumens light a room well?

It all depends on the surface and the distance between the source and the surface to be lit. A ceiling light often complements ambient lighting rather than carrying everything alone. The perceived result also varies with the diffuser: opal glass softens, a frosted panel spreads. The product sheets in this collection do not state a lumen output, so we stick to the stated wattage and the diffusion.

Which recessed ceiling light to choose depending on the room?

Format and number of light points guide the choice before style. A large globe model suits a living room, a ring or rods a bedroom, a slim bar a hallway, a wide panel a room needing even light. Here are the formats listed in the product sheets.

Recessed spots for kitchen and dining room

Over a worktop, look for wide, even diffusion rather than a single point. The oval ring of Lunlinessa spreads light across three globes over 47 x 20 cm, which avoids the shadow zone above the table. Find other formats in the models suited to the kitchen and the modern kitchen ceiling lights.

Recessed spots for hallway and entryway

In a narrow hallway, height matters more than diameter: a bar or 3 cm rods fit anywhere, like the Trina ceiling light with its golden bar. To go further, see hallway and entryway or the modern versions for hallways.

Glass, metal or panel: which material and shape to choose?

Glass dominates the collection (97% of references), paired with a black or white metal mount in the same proportion. A few models combine aluminium, acrylic and iron for a rectangular panel. Glass handles the light diffusion, metal gives the line. In terms of shapes, there are balls (47%), tubes (33%), round and square forms.

Adjustable recessed spots

No model in this selection is given as adjustable: the light goes downward, with no tilt adjustment. If you want to direct the beam, it is better to combine several fixed points, or look at the more design-led pieces and the black metal ceiling lights to play with lines rather than angle.

Dimmable recessed spots

A dimmer remains rare here: only one family of models allows it, the panel version. Before buying, check the sheet of the product concerned and compare with the dimmable ceiling lights. Golden and brass details, meanwhile, are found in the golden finishes and the golden ceiling lights.

What wattage of LED spot to choose to light my living room?

Wattage alone does not say everything: the diffusion of the glass, the number of light points and the use of the room also count. The models in the collection run at 10 W, with an E14 base or integrated LED on the panel, and several ceiling lights can be combined in the same room. A dimmer is only offered on the panel version, to be checked before buying.

How many spots should be installed for a 40 m2 room?

The number depends on the output of each point, the ceiling height and what you do in the room, not just the surface area. In practice, several sources are spread out to avoid dark zones, rather than relying on a single very powerful point. For a large volume, browse lighting a living room and the black living room ceiling lights.

Are 2000 lumens a lot?

A high output is judged relative to the room: in a large living room it goes unnoticed, in a narrow hallway it seems strong. That is where a dimmer becomes useful, when the model provides for one. In this collection, only the panel version is dimmer-compatible; elsewhere, you adjust by choosing the number of light points.

How to install and maintain a recessed ceiling light?

Installation is on the ceiling on a standard power supply, with the fixings provided by the manufacturer. On models with an E14 base, the bulb is changed by unscrewing the globe; on the panel, the LED is integrated and cannot be replaced. Maintenance is limited to a soft cloth on the glass and metal, without abrasive products. The IP20 rating requires a dry location.

How to fix an LED ceiling light to the ceiling?

Start by cutting the power at the consumer unit, then locate the fixing points in the ceiling before drilling. The luminaire screws onto its mount, and the connection is made on the provided terminals. If you are unsure about the socket type, E27 ceiling lights work with a large screw bulb, whereas almost all of this collection uses the small E14 base.

How to clean glass globes?

A soft cloth is enough, slightly damp if needed, then dry without rubbing hard. Avoid abrasive sponges and harsh products that dull the glass. For metal structures, particularly the modern white versions and the white ceiling lights, the same method applies.

What is the lifespan of an LED spot and what are its drawbacks?

An LED lasts significantly longer than a conventional bulb and uses less power for equivalent use. In this collection, lifespan translates into a concrete commitment: a 2-year warranty across the whole selection. The limits are real and well known: the light remains directional, the result depends on the quality of the diffuser, and the IP20 rating reserves these models for dry rooms.

What are the drawbacks of LED lamps?

LED mainly lights along its axis, which means spreading the light points rather than relying on a single source. The result depends on the diffuser: opal glass softens, smoked glass leaves the source visible, as on the Tamara ceiling light. Finally, an IP20 rating is suitable neither for a damp room nor outdoors.

Should a spare bulb be kept on hand?

On models with an E14 base, keeping a spare bulb avoids being left in the dark the day one blows, and each globe is replaced independently. On the panel version, the LED is integrated: there is nothing to plan for, but nothing to change either. To extend an existing set, take a look at our full range of lighting.

Black or white: which colour of recessed ceiling light to choose?

Black is the majority in the collection, followed by white, with a few grey and red on the panel. The decisive criterion remains the ceiling: on a light surface, a black model draws its lines and becomes a decorative feature; a white model blends in and visually lightens the room. The choice also comes down to details, black ring, golden rods or brass bar.

Black recessed spots

Black highlights a graphic structure and pairs well with black metal ceiling lights or black ceiling lights. On models with rods and bars, the contrast with a white ceiling remains the most striking. The Gulliver ceiling light, for example, combines graphite globes and golden rods.

White recessed spots

White suits small rooms and low ceilings, where it stays discreet. It is also the colour of ring models like the Serephina ceiling light. To compare the two approaches, explore the white and black ceiling lights and the ceiling lights designed for the bedroom.

Frequently asked questions about recessed ceiling lights

Need a discreet ceiling light for a hallway or a large globe model for a living room? The Callinaro ceiling light and the Brylis panel show the two extremes, slim bar and wide panel. Also compare the modern-style models and the office ceiling lights before confirming your format.

Secure payment, tracked delivery, possible returns and Designix customer service: you order with peace of mind, and our Designix lighting catalogue helps you complete the lighting room by room.