Floral hanging basket

A flower pendant light is chosen first for its shape and socket: glass bell flowers, opal globe, wavy shade or woven petals, the light spreads over several points and falls softly. Allow for a format of 20 to 70 cm in a bedroom, 80 to 140 cm wide in a living room, and check the socket before ordering.

Contents

• What light does a flower pendant give
• Where to install it in the home
• How to choose it for the kitchen
• What diameter and height in a bedroom
• XXL formats for high ceilings
• Outdoor, wall and wedding
• Materials and colours
• Installation and care

What light does a flower pendant light give?

A flower pendant light generally spreads a soft, distributed light: bells, opal globes and wavy shades disperse the source over several points rather than one dazzling point. Depending on the model, the bulb is chosen in E27, G9 or GU10, or remains integrated as LED, which lets you set the temperature and intensity.

Opal globes, wavy glass and glass bells: a diffuse light

On a five-bell flower like the golden five-bell glass flower, the light starts from several places and settles on the table without creating hard shadows. Opal glass stops the filament and softens contrasts, wavy glass keeps a little relief and some reflections. Glass bells are cleaned dry, but their weight requires a solid ceiling fixing point.

E27, G9, GU10 or LED socket: what it changes

An E27 socket takes a screw bulb: you choose the temperature and intensity when buying the bulb, and you can change it. The smaller G9 fits fine bells and small flowers. GU10 sends a directional beam, handy above a worktop. On models with integrated LED like the three black opal globes, the light is announced as warm white from 2700 to 3500 K and the source cannot be replaced.

Where to install a flower pendant light in the home?

It is mainly placed in the living room, bedroom, dining room and kitchen, depending on the format: a large oval or a large flower in living areas, a short format in a bedroom, hallway or above a desk.

Above a dining table or a kitchen island

To light the dining table, allow generally 75 to 85 cm between the shade and the tabletop: low enough for the light to reach the plates, high enough not to block the guests' view. A composition with several bells covers a long table better than a single point. On an island, a short and wide kitchen pendant lights the work area without taking over the view.

In a bedroom or hallway, closer to the floor

In an adult bedroom, a format of 20 to 70 cm is enough, hung short above a bedside table. In a hallway and entrance, the ceiling is sometimes low: prefer a small model in fabric or rattan, with adjustable cable height, so you do not hit your head as you pass. The living room remains the room that takes the largest volumes.

Design flower pendant light for the kitchen: how to choose it?

For a kitchen, a model that hangs low and lights wide is better: fine slats, cylindrical tubes or an oval wire structure, often in steel and black finish. A GU10 socket or an E27 bulb lets you choose a clear light on the worktop.

Original kitchen pendant: glass bells or cylindrical tubes

Glass bells, opal or wavy, give a soft light and a flower design: they suit above an island when you want an atmosphere rather than task lighting. Cylindrical tubes, on the other hand, align several sources and frame the worktop. The four cylindrical tube pendant in steel and aluminium is fixed lengthwise above an island, with a GU10 socket.

Italian design style: what sets it apart

This style is recognised by fine lines, oval steel structures, plays of slats and black or gold finishes, without clutter: the shape carries the piece. This is what you find in the modern models. The same restraint guides our selection of design pendant lights.

Flower pendant light for the bedroom: what diameter and height?

In a bedroom, you want a low, soft light: a format of 20 to 70 cm in diameter or width, hung fairly short. Several references have an adjustable height, from 38.9 cm to 300 cm depending on the model, which lets you adjust it above a bedside table.

What diameter for a bedroom?

Around 20 cm, a model lights a bedside table or a reading corner without invading the room. Between 40 and 50 cm, it becomes the centrepiece of a small bedroom. Up to 70 cm, it carries the general lighting. The fabric shade pendant comes in 20, 30, 40, 45 and 50 cm, with an E27 socket.

Adjusting the pendant height

An adjustable cable is set before tightening the fixing: lower the light, coil or cut the excess depending on the system, then lock it. Aim for a light that does not fall into your eyes when seated. The woven petal model in rattan, from 60 to 100 cm, filters more and sits well in a modern bedroom.

XXL pendant for high ceilings: what formats exist?

For a high ceiling, wide formats are available: up to 140 cm wide or in diameter for oval and wire structures, and compositions with several bells or globes that fill the volume. An adjustable cable height lets you bring the light down to the right level.

Tree pendant light: compositions with several points

A so-called tree pendant light shares a single canopy and lets several sources hang down like branches: five-bell flower, three-globe flower, golden stems ending in flowers. The light disperses instead of concentrating at one point. The golden branches and white flowers pendant comes in several widths up to 148 cm.

Choosing the width according to the ceiling

Simple method: measure the ceiling height, then the distance between the ceiling and the surface to be lit (table, floor, counter). The pendant should hang within this zone. Oval wire structures range from 62 to 140 cm wide depending on the model, with a maximum cable height of 150 cm for most. The black oval wire pendant measures 140 cm by 140 cm.

Outdoor, wall or wedding flower pendant light: what to check

All the models in the collection are rated IP20: they are placed indoors or in a sheltered volume, never outdoors exposed to rain. For a wedding or an event, they are used indoors, under a canopy or a tent, not in damp open air.

Outdoor flower pendant light: what the IP20 rating allows

IP20 protects against solid bodies, not against water. A model can therefore live under an awning, in an enclosed veranda or under a canopy without splashes. For a terrace or a garden, you need an outdoor light with a higher rating. In a bathroom, the same logic applies: a wet zone requires an IP44 model or higher.

Wall or wedding flower pendant light: pendant or wall light?

A pendant is fixed to the ceiling: if the mounting point is missing on a wall, a wall light is better. For event decoration, these lights make a luminous point above a welcome table or a buffet. Our design pendant lends itself to these settings, with light filtered by glass or fabric.

Artificial flower pendant light: a real lamp, not a decorative flower

The flower here is a crafted shape: bells, woven petals, wavy shade, branches. The light actually lights, it is not a bouquet fixed to the ceiling. That is the difference between a luminous object and a silent decoration.

What material and colour to choose: glass, metal, rattan or fabric?

Glass, often opal or wavy, lets a soft light through; metal and steel draw the structure and stand the test of time; rattan and caning warm the room; fabric filters more. Finishes range from black to gold, via white, beige and grey.

Opal glass, wavy glass and bells: how the light renders

Opal glass diffuses widely and hides the bulb; wavy glass keeps relief and some reflections. In both cases, the light is enveloping and the shadows stay soft. Cleaning is done dry, without abrasive product. Ball and globe shapes complete this rendering, as in the ball pendants.

Black or gold metal, rattan and fabric: the effect in the room

Black structures and blends into a contemporary interior, like the black versions with wire structure or opal globes. Gold, on the other hand, warms the room against a light background: gold finishes range from brass to gilded metal. Rattan and caning bring a warm material, close to wood. Metal pendants rely on the line, in steel or aluminium.

How to install and care for a flower pendant light?

Installation requires a solid ceiling fixing point, then adjusting the cable: the height is often set between 150 cm and 300 cm depending on the models. For care, a soft cloth is enough on metal, glass and rattan. Cut the power before any handling.

Fixing and adjusting the height above a table

First check that the anchoring point holds the weight of the light, then adjust the cable before plugging in. Above a table, the usual distance is 75 to 85 cm between the shade and the tabletop. A dimmer is compatible with some references, which lets you lower the intensity in the evening.

Cleaning without damaging the radial wires and woven petals

On a wire structure or a shade with radial wires, dust comes off with a soft cloth or a vacuum with a fine brush. On rattan, no aggressive product or insistent damp sponge. The announced warranty is 2 years or 5 years depending on the models.

At Designix: secure payment, tracked delivery, returns and customer service to guide you from choice to installation.

Unsure between two widths? Compare the wavy shade pendant, available from 24 to 70 cm, and the 140 cm wire oval, then confirm your basket.

Frequently asked questions about the flower pendant light