Copper bedside table lamps

Measure the height and footprint of your bedside table before choosing: a copper bedside lamp is first judged on its dimensions, from 36 cm for a flat base to 71 cm for an articulated arm. Then comes the light, with a fabric shade for reading and cut crystal for a wider clarity.

What light does a copper bedside lamp give?

Copper reflects an amber glow that warms the room without darkening it, and the shade does the rest: fabric filters the beam towards the book, cut crystal diffuses it more widely. The models in the collection take E14 or E27 bulbs, and one of them gives a warm white light of 2700 to 3500 K.

A warm light for reading in bed

For reading, the light should fall towards the pages and not towards the eyes. A low, closed shade, like the one on the Violino with cylindrical shade, concentrates the beam on the book. The Ambrosia and its three shades instead spreads the light over three points, which suits a room where you want an atmosphere rather than a reading spot.

Copper and warm white bulb: what result?

A warm white bulb, around 2700 to 3500 K by trade standards, does not turn the copper green and keeps the amber tone of the metal. Above 4000 K, the light leans towards cold white and the copper reflection loses its warmth. If you are looking for this tone without a visible filament, compare with our LED lighting for the bedroom.

Where to place a copper table lamp in the bedroom or living room?

In the bedroom, the lamp goes on the bedside table, at mattress height, to light the book without dazzling. In the living room, it finds its place on a console, a sideboard or a side table, as accent lighting rather than main lighting. All the models in the collection are listed for the bedroom and living room.

On the bedside table, at mattress height

The useful marker: the bottom of the shade should be roughly level with the mattress when you are sitting, to light your knees and the book. The Bankier with flat base, 36 cm high, suits a low bed. For a taller bedside, the Borgillio Cuivrée and its articulated arm reaches 71 cm.

On a console or living room sideboard

Outside the bedroom, the same lamp becomes accent lighting: it highlights a wall, lights a frame or accompanies reading in an armchair. A wide format, like the Ambrosia and its three shades (48 cm square), suits a console better than a bedside table. Find the right formats in our designer table lamps for the living room.

How to choose between an Italian design bedside lamp and an original bedside lamp?

Italian design is recognisable by a simple silhouette and a strong detail: a copper dome on an articulated arm, a flat base, a cylindrical shade. Originality comes through shape and the number of shades, like the three-arm model. The styles measured across the collection range from modern to contemporary and baroque.

Shapes and silhouettes: dome, tube, rectangular shade

Three families emerge. The dome, rounded and curved, recalls the mushroom lamp and gives a soft look: it is the shape of the Borgillio. The rectangular shade of the Bankier frames the light forwards and matches straight bedside tables. The cylinder of the Violino stays understated and fits anywhere. To go further, see our modern table lamps for the living room.

Original without being busy: the right balance

One strong piece is enough: the cut crystal of the Brigantine in cut crystal, a copper base, or three shades. Add a second fancy detail and the bedside table becomes a decoration that keeps you awake. For a more restrained look, the Scandinavian table lamps and the gold and black finishes offer calm lines.

Which bulb fitting and bulb for a copper bedside lamp?

The E14 fitting equips most of the selection, the E27 the large-shade models. An E14 bulb is more compact, so suited to narrow shades; the E27 opens up more choice of wattages. Respect the maximum wattage indicated on the socket: 40 W max on three models (Borgillio, Violino, Bankier), 60 W max on the Carlton 1 PRO, 18.4 W on the Ambrosia, and not stated for the Brigantine.

E14 or E27: what it changes day to day

The E14 requires a compact bulb format: ideal in a cylinder or a narrow rectangular shade, with fewer connected or filament models available. The E27 allows more latitude and heats up a little more. The Carlton 1 PRO lamp is E27 with 60 W max, which allows a more generous bulb.

Respecting the maximum wattage marked on the socket

The socket always carries a marking such as 40 W max. Exceeding it heats the fabric of the shade and ages the socket. An LED of a few watts is more than enough for reading, and the IP20 rating, present on most models, reminds you that this is for dry indoor use.

What height of lamp for a bedside table?

Measure the total height of the lamp relative to your bedside table: the models measured range from 36 to 71 cm. A low lamp suits a narrow table, a tall stem a wide bedside. Also check the footprint: from 16.5 cm deep for the flat-base model to 48 cm for the three-shade one.

The lamp should light without rising above the bed base

A lamp taller than the sleeper's head lights upwards and is no longer useful for reading. The right marker: the shade sits below the line of sight when you are sitting up in bed. The Bankier, at 36 cm, and the Violino, at 37 cm, are just right for a bed with a mattress height of around 50 cm.

Small bedside table: choose a narrow base

On a 30 cm top, a 17 cm base leaves room for the book and a glass of water. The Violino fits within this 17 cm square footprint. For mixed use, reading in bed and working, also look at the adjustable lamps and the designer table lamps for the office.

How to match copper with wood, black or crystal?

Copper matches wood for a warm result, black for a crisp contrast, and crystal for a more dressed-up note. Simply keep one other dominant material in the room: wood, black metal or ceramic, then let copper bring the warm touch.

Copper and wood: a warm duo

With a raw wood or driftwood piece, keep copper as an accent: a slim base, a neutral shade, and the room stays calm. Compare with the black wood bedside table lamps or the wood lamps for the living room if you want to reverse the roles and make wood the main material.

Copper and black: the contrast

Deep black brings out the copper without gilding it further. The Violino with cylindrical shade and the Bankier with flat base play this duo. To explore further, see the black metal models and the black finishes for the living room.

Crystal and linen complete the list. A crystal table lamp restores a little lustre on a chest of drawers, and a linen shade softens a very shiny copper. For a third material, the ceramic bedside lamp breaks up the metal without competing with it. The whole selection is in our lighting selection.

How to arrange ceiling spotlights?

Spotlights go above the areas of use, not in the line of sight when sitting in bed, and preferably adjustable to aim at a wall or a bookcase. They provide the general lighting, the bedside lamp brings the close, lower and softer light.

Avoiding the bed axis and reflections on screens

A spotlight right above the pillow casts a shadow on the book and a reflection on a screen resting on your knees. Aim it at the wall behind the headboard or at a shelf: the light bounces back and becomes softer. Two spotlights on either side of the bed are enough in a standard-sized bedroom.

Complementing spotlights with a bedside lamp

Spotlights give the general level, the bedside lamp gives the reading level. This second light point, lower and warmer, avoids switching on the ceiling every time you get up. Adjustable lamps let you aim the beam without moving the base.

What mistakes to avoid with a copper bedside lamp?

Three mistakes come up again and again: a bulb more powerful than the maximum wattage of the socket, a lamp too tall or too wide for the bedside table, and abrasive cleaning on the copper. An IP20 rating means dry indoor use: not a damp bathroom. Dust with a soft cloth.

A bulb too powerful in a small shade

In a narrow cylinder, a strong bulb heats the fabric and yellows the socket. Stay below the marked 40 W max, and choose an LED: for the same light output, it heats much less. The Ambrosia and its three shades is rated at 18.4 W, a low-consumption marker.

Cleaning copper without abrasive products

Copper patinates, that is normal. A soft, dry cloth is enough for daily care; abrasive powders scratch the finish and make it shine unevenly. For a very ornate lamp like the Brigantine in cut crystal, dust the crystal dry, without wetting the base.

How to choose your copper table lamp, step by step

First measure your bedside table, then decide on the use: reading only or atmosphere. The fitting follows the shade, the height follows the furniture. The table lamps for the bedroom and the designer table lamps for the living room group the formats by room, and the ceramic table lamps offer an alternative if copper feels too present.

Secure payment, tracked delivery, returns and Designix customer service accompany every order. Start with the Borgillio Cuivrée and its articulated arm if your bedside is wide, or with the Carlton 1 PRO lamp for a faceted E27 shade.

Frequently asked questions