E14 table lamps

This selection is also available in our French store: Lampes à poser E14

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

What table size for how many people?
Allow about 60 cm per guest: 120 cm for 4, 160-180 cm for 6, 200+ cm for 8. Dimensions are listed on each product page.
Which tabletop material should I choose?
Wood is warm, ceramic is highly resistant to scratches and heat, glass is bright and airy. Choose according to how you will use it.
Extendable or fixed?
Some tables are extendable (with extension leaves), as stated in the title and on the product page.
How do I care for the tabletop?
Wipe with a soft cloth; avoid standing water on wood and abrasive products.
E14 table lamps
Designix · Design lighting

The right furniture, in the right place

Check the dimensions with our fit checker and receive pieces made to last. Unsure? Our team will answer your questions.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Plan on one E14 table lamp per area that needs a close halo of light: one on the bedside table, one on the living room console, one near the screen in the office. The 14 mm screw socket, the smallest in the standard, takes candle, drop or flame bulbs, and serves as accent lighting, not as general room lighting.

What is an E14 lamp and what light does it give?

The small base changes everything in a room: it allows compact lamps, so close halos of light where a large lamp would eat up the surface. The bulb is chosen, and the light tone decides the mood as much as the shape of the base. An E14 lamp is a portable fixture fitted with a 14 mm screw socket, designed for candle, drop or flame bulbs. It serves as accent lighting on a table, desk or console, with a bulb chosen according to the desired light tone.

E14 lamp: the small screw base

This collection contains no products at the moment. The page therefore serves as a guide: it recalls the principle of the E14 base and points to the rest of the catalogue, without showing any invented model or product feature. The rest of the catalogue is visible in all the home lighting.

E14 LED lamps: the light you choose

An E14 LED bulb gives off little heat and comes in several tones. Around 2700 K, the light leans warm yellow and suits a reading corner or a bedside. Towards 3000 to 4000 K, it becomes whiter, useful on a worktop. Not all E14 LED lamps are equal in rendering: the shape of the bulb and the transparency of the shade decide how soft the halo is. See the designer LED table lamps.

Where to place an E14 lamp in the home?

Place it within reach, never in the line of sight when seated. The small format suits narrow surfaces: a side table, a bedside shelf, a desk return, a low hallway unit.

In the living room, on a console or side table

A living room console rarely offers more than thirty centimetres of depth: the E14 lamp fits without overhanging. It is placed at the end of the sofa, offset from the area where you watch television, to avoid a bright point in the field of view. Designer table lamps for the living room then act as an object as much as a light source.

On a bedside table, at mattress height

The right height is that of the mattress when lying down: the bottom of the shade reaches shoulder level, the light falls on the book and not in the eyes. A compact model in bedside ceramic or with a linen shade softens the halo for evening reading. For a desk, prefer a stable base that does not slide when you brush the switch, such as metal table lamps for the office.

How to choose between E14 8W lamps and E14 100W lamps?

The watts written on a socket or on a lamp label are a maximum permitted power, not the light emitted. A low-consumption E14 LED bulb is therefore enough for a bedside or a desk. You read the value indicated on the fixture before screwing in the bulb, and never exceed that limit.

Bulb power or maximum socket power?

Two figures coexist and are often confused. The maximum power engraved near the socket describes what the fixture can withstand without heating up: a more powerful bulb raises the temperature, yellows a fabric shade and wears out the socket. The power consumed is that of the bulb bought separately. An E14 100W therefore generally refers to a socket ceiling, not a purchase target.

Table lamp bases and their bulbs
Base Socket Common bulbs Typical use
E14 screw, 14 mm candle, drop, flame, LED bedside lamp, console, desk
E27 screw, 27 mm standard, globe, LED large-base living room lamp, wide shade
G9 pin, 9 mm halogen or two-pin LED small compact glass fixture
GU10 pin, 10 mm LED or halogen spotlight ceiling or track spotlight

E14 LED lamps: less heat, more choice of tones

An LED heats up much less than a filament bulb, which leaves more latitude on the shape of the shade and on how close the fabric is. It comes in several colour temperatures and in dimmable bulbs, handy for lowering the intensity at the end of the evening. Check the dimmer's compatibility with the bulb, an old installation may hum.

Which E14 lamp for the living room, bedroom or office?

The room decides the expected rendering, and therefore the size of the fixture and the shape of the shade. A living room supports a taller base; a bedroom calls for a soft halo; an office requires a flux directed towards the work surface.

Which E14 lamp for which room
Room Desired rendering Shape or material Placement
Living room warm halo and atmosphere metal, glass, crystal, Italian design console or side table, out of the field of view
Bedroom soft light for reading ceramic, wood, linen bedside table, at mattress height
Office directed lighting metal, adjustable model next to the screen, without reflection on the surface
Hallway or corridor discreet light marker small format, black or gold low unit, near the door

An E14 bedside lamp for the bedroom

On a bedside table, the E14 lamp must stay discreet and not wake the other occupant: a shade closed at the bottom directs the light towards the floor and the book. Models designed for the bedroom favour low bases and matt fabrics, which do not reflect glare.

An adjustable E14 lamp for the office

An articulated arm or a swivelling head allows you to aim at the keyboard or a document without lighting the screen. For the eyes, the source is placed on the side opposite the writing hand, to avoid the shadow of the wrist. Adjustable models and black table lamps for the office limit reflections on a dark screen.

How to connect several lamps to a single electrical supply?

Several lamps can run from the same supply provided they are wired in parallel: each fixture receives the same voltage, and the failure of one does not switch off the others. Cut the power at the breaker before working, identify live, neutral and earth, and entrust the connection to an electrician at the slightest doubt about the wire gauge.

Wiring several lamps in parallel

You start from the junction box or the terminal block of the first lamp to supply the next one. The live wires connect to each other, the neutrals to each other, the earths to each other, each on a separate terminal. This setup is the opposite of series wiring, where a single blown bulb cuts the whole circuit. Before closing up, check that the combined power of the bulbs remains compatible with what the line can handle.

Wiring 3 lamps to 1 switch

The three lamps are wired in parallel and controlled together: the live wire passes through the switch, then supplies each socket. The number of conductors to fit in the box increases with the number of lamps, so choose a box deep enough and suitable terminal blocks. For a clean surface-mounted installation, the fixtures in the Designix lighting catalogue can be installed without chasing the wall.

How to arrange ceiling spotlights to complement table lamps?

Draw the room plan before drilling, distribute the spotlights on regular lines with a constant spacing, and keep a sufficient distance from the walls so as not to create a dark zone. Spotlights provide general lighting, table lamps bring local accent light.

Distributing spotlights in a living room

A simple grid is better than a random accumulation of points: two or three parallel lines, identical spacing, and a setback from the walls that avoids a cut halo on a bookcase. Take tall furniture and beams into account before marking out. In a bedroom, LED table lamps for the bedroom effectively complement a discreet ceiling.

Spotlights and table lamps: avoiding double shadows

Two nearby sources projected onto the same plane create two cast shadows, which is tiring when reading. Offset the accent lamps from the spotlights aligned above them, or switch off the ceiling when reading. A Scandinavian style interior embraces this mix of low sources and a sober ceiling.

Designer globe table lamp and Italian design: how to make sense of it?

An Italian design lamp is recognisable by its simple geometric lines, its worked materials such as metal or glass, and a diffuser that softens the light. The globe lamp is a common variation: a sphere that lights without dazzling and serves as much as an object as a source.

The globe lamp, a sphere that diffuses without dazzling

The globe spreads light in all directions and eliminates the bright point effect of an open shade. Placed on a piece of furniture, it lights the wall and ceiling around it more than the table itself, which makes it a mood lamp. Versions in crystal lamps reflect glints; gold and black finishes play on contrast.

What distinguishes an Italian design table lamp

Three signs can be spotted in a photo: a base whose section stays slender despite the height, a diffuser whose material is part of the design (opaline glass, perforated metal, milky sphere), and a balance of volumes that stands without a massive plinth. Design comes before ornament. Modern table lamps for the living room follow this logic of clean lines.

How to care for and match an E14 lamp?

Cut the power and let the bulb cool before touching the shade or the socket. Then clean according to the material: soft dry cloth on metal, mild soap on ceramic, glass cleaner on glass, dry dusting on linen.

Cleaning according to the material of the base and shade

Metal dislikes standing moisture: a barely damp cloth followed by a dry wipe is enough, and avoid abrasive powders that scratch the finish. Enamelled ceramic is cleaned with mild soap, without a scouring sponge. Glass and crystal require a lint-free cloth so as not to leave fibres. Wooden bases stay with a dry cloth, without product. For ceramic, see the ceramic table lamps; for fabric, a shade is dusted dry, never soaked.

Matching the lamp to the rest of the room

First look at the height: the top of the shade should pass below shoulder line when seated, otherwise the lamp overwhelms the furniture. Then the colour of the base, echoing a picture frame, a table wood or a handle. Finally the shape: a conical shade calms a busy interior, a cylinder accompanies straight lines. Wooden table lamps for the living room, black for the living room and white ceramic cover these three directions.

Before confirming a model, measure the depth of the surface it will sit on and check the maximum power written on the socket: these are the two points that decide comfort of use. Desk lamps and white models complete the tour of available finishes.

Customer service answers questions about assembly or bulb compatibility before and after ordering.

Frequently asked questions about E14 lamps

Can you put an E14 100W bulb in an E14 lamp?

It all depends on the maximum power indicated on the socket or the fixture's label. A bulb that is too powerful heats up the lamp and damages the shade, especially in fabric. With LED, the power consumed stays low for an equivalent level of lighting: check compatibility before screwing in the bulb, never exceeding the engraved value.

Wiring 3 lamps to 1 switch: how to do it?

The three lamps are connected in parallel and controlled together: the live wire passes through the switch then supplies each socket, the neutral and earth follow the same path from lamp to lamp. Use a junction box or terminal blocks suited to the number of conductors, and check the total power before closing up.

How to arrange ceiling spotlights?

Draw the room plan and place the spotlights on regular lines, with a constant spacing and a sufficient distance from the walls to avoid shadow zones. Avoid lighting straight onto a seat and take tall furniture and ceiling height into account before drilling.

What are the most beautiful living room lamps?

There is no universal answer: a right living room lamp is one that matches the table, the sofa and the light already present. Look at the line of the base, the material, the shape of the shade and the way the light is diffused. A sphere or a clean-lined design rides trends without going out of fashion.

How to put rings on a curtain?

Clip rings are fixed to the top of the fabric, at regular intervals, pinching the hem without deforming it; eyelet rings require reinforced fabric where the holes are made. Check the diameter compatible with the rod and count the total width of the curtain before ordering.

Our advice for choosing
This collection brings together table lamps fitted with a small E14 screw socket, designed for a bedside table, a desk or a corner of the living room. The small base accepts candle, drop or flame bulbs, in LED, for localised accent light rather than general lighting.