White wooden table lamps

To choose a white wooden table lamp, keep three things in mind: a wooden base finished with metal, a light shade that diffuses light instead of directing it, and a round shape of around Ø 23 cm that fits on a bedside table as well as a desk corner. The E27 socket leaves the bulb up to you.

What does a white wooden table lamp look like?

The wooden base brings a warm tone, the light shade brightens the whole, and the metal refines the silhouette. The round shape avoids sharp corners, and the Ø 23 cm keeps the footprint small: the lamp sits down without rearranging the whole piece of furniture. This selection plays with white and beige, in a Nordic and industrial spirit, for an office, a living room or a bedroom.

Light wood and white, what effect in the room?

Wood warms a white wall without dulling it, and the light shade blends into the decor instead of marking it. The result stays calm, which suits a room where you want to add light without adding colour. To broaden the shade, compare with the white design table lamps and their material variations.

A wood and metal lamp, for what style of room?

Wood carries the Nordic spirit, metal the industrial touch. The same lamp therefore moves from a bright, uncluttered interior to a rawer room, with a brick wall or a steel piece of furniture for example. If you are looking only for the Nordic side, look at the Nordic models, more understated in their finishes.

The articulated arm, known as a scissor arm, lets you direct the light towards the keyboard or the book. The selection is covered for two years. The model that embodies these points is the Woody bedside lamp, in wood and metal, white shade and scissor arm.

What light does a white wooden table lamp give?

The light shade filters the light and diffuses it widely, without a hard beam or marked shadow area. It is an accent light, soft on the sides and stronger downwards. As the socket is an E27, the final atmosphere depends entirely on the bulb you screw in, and you can change it without changing the lamp.

Which E27 bulb to put in a white wooden lamp?

A filament bulb gives a warm light and lets the source be seen, which suits a light shade well. A standard LED lights more neutrally and uses less power. The E27 format is standard: you will find both in any supermarket, and you can keep a spare bulb on hand.

Can you use an LED or smart bulb?

Yes, the E27 socket accepts an LED as well as a smart bulb, controllable by phone or voice. Just check that the bulb power stays within the limit stated on the lamp's spec sheet. To go further with this type of lighting, browse the LED design table lamps and our lighting range.

Where to install a white wooden table lamp?

The lamp is intended for indoor use in a dry room (IP20) and suits the office, the living room as well as the bedroom. On a desk it lights the work surface, on a bedside table it accompanies reading, in a living room it provides an accent light near a sofa or on a console. The articulated arm makes the difference: you direct the beam without moving the lamp.

On what furniture should you place a white wooden lamp?

With a Ø 23 cm, allow a free surface of about a quarter of a square metre: the top of a bedside table, the corner of a desk, the top of a console or a low shelf. Avoid unstable or too narrow supports, and leave a little air around the shade. For a workstation, see the design desk lamps.

Bedside, desk or mood lamp: can the same model do it all?

An adjustable model covers all three uses, but not at the same time: on the desk it lights the task, at the bedside it stays pointed downwards so as not to disturb, as a mood light it turns towards the wall. If the bedside is your main use, compare with the design bedroom lamps. For a living room, look at the design living room lamps and the adjustable lamps.

How to connect several lamps to a single electrical supply?

The simplest case is the multi-socket extension plugged into a wall socket, with one lamp per socket, staying below the total power allowed by the circuit. For several fixed points, a dedicated line is needed and the connection must be carried out by a qualified electrician. You never stack terminal blocks behind a piece of furniture to multiply the outlets.

Multi-socket extension or new dedicated line?

The multi-socket extension suits lamps that you move and small accent lights. A dedicated line is required as soon as the points are fixed, recessed or numerous, or when the existing circuit already powers other devices. If in doubt, have the circuit checked before adding points.

How many lamps on the same socket?

No fixed number applies: everything depends on the circuit and the bulbs installed. The practical rule is not to exceed the total allowed power, to spread the lamps out and to prefer several wall sockets over a single overloaded block. For complete lighting of a room, see all the home lighting solutions.

How to match wood and white in a room?

Wood and white accept almost all colours, provided you stay with two or three shades per room. Beige and light grey extend the Nordic spirit, black and gold bring a marked contrast, sage green or grey-blue add a soft note. White remains the base, wood the warmth, the third shade the accent.

Wood and black, how to play the contrast?

Black works better on a single object: a frame, a handle, a lamp base. Repeated everywhere, it hardens the room and dulls the warmth of the wood. If you like this contrast, look at the black living room lamps and the gold and black lamps, which combine both registers. For a more dressed-up room, the crystal table lamps play a different card.

What wall colour with a white wooden lamp?

A white, beige or light grey wall lets the lamp blend in and highlights the wood. A stronger wall, sage green or grey-blue, brings out the light frame. Avoid tones too close to the wood: the lamp disappears and loses its interest.

Table lamp, floor lamp, white chandelier: how to find your way?

A table lamp is placed on a piece of furniture and moved as you wish. A floor lamp, also called a standing lamp, takes its place on the floor and lights a larger area. The chandelier and the pendant light are fixed to the ceiling above a table, while the ceiling light provides the general lighting of the room. The vocabulary changes, so does the use.

What are floor lamps called?

They are floor lamps, or standing lamps. They rest on a base, a tripod or a weighted foot, and do not need to be fixed to the wall: ideal near a reading armchair. A table lamp, on the other hand, stays on a piece of furniture, closer to use and more mobile. For a bedroom, look at the black metal bedside lamps.

Nordic, industrial or Italian design: what differences?

The Nordic style focuses on light wood, simple lines and neutral shades. The industrial style embraces exposed metal, sometimes raw, and bolder shapes. Italian design works with fine lines and refined materials, with an often graphic shade. This selection leans Nordic and industrial, but you will find other leads in the complete lighting range, the black versions for the office or the metal desk lamps.

How to care for a white wooden table lamp?

A soft, slightly damp cloth is enough for the wood as well as the shade, then a dry cloth to avoid marks. Avoid abrasive products, alcohol and standing water, which attack the varnish. The light shade should be dusted regularly, dry, without wetting it: that is what keeps its clean shade.

How to remove varnish from a wooden piece of furniture?

Apply a wood-appropriate stripper in a thin layer, leave it to act, then remove the softened varnish with a flexible spatula. A fine sanding finishes the job. Always test on a hidden area and work in a ventilated room, with gloves and respiratory protection in place.

Can you strip naturally varnished wood?

Progressive sanding and gentle strippers, without aggressive solvents, can remove a varnish, especially on small surfaces. The process takes time and remains risky on veneer: a test on a hidden area is essential before treating a whole side. For routine maintenance, these methods are not necessary.

To keep the wood and metal lamp, a soft cloth is enough: dust the wood without abrasive products, then wipe the metal with a slightly damp cloth before drying. Avoid standing water on the wood and overly aggressive products, which can mark the finish. For the softest finishes, the linen table lamps complement a wood and white interior well.

Delivery, returns and payment: order with peace of mind

Payment is secure, delivery is tracked and returns are possible. Designix customer service answers questions about dimensions, socket or assembly before and after purchase. First look at the Ø 23 cm and the space available on your furniture, then confirm your model: the Woody lamp and the rest of the white and wood selection await you in the collection.

Frequently asked questions