Solar LED spotlights
This selection is also available in our French store: Spots LED solaires
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right light output?
At what height should the light be installed?
What type of bulb?
Compatible with LEDs and dimmers?

Light changes everything
From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Allow one light point per zone to be lit, a panel that sees the sun for several hours a day, and a housing able to stay outside all year round. Solar LED spotlights recharge during the day, switch on in the evening and install without running an electrical line to a driveway, a facade, a terrace wall or an outdoor staircase.
The outdoor solar LED spotlights collection stays deliberately short and reads like a guide: recessed, adjustable, spike or floodlight formats, black or white finishes, with or without a sensor.
How does a solar LED spotlight work?
A photovoltaic panel captures daylight, a rechargeable battery stores that energy, built-in LEDs release it in the evening. No mains cable is needed: the housing screws to the wall, recesses into the masonry or plants on a spike, in an open spot. That is what makes these fixtures useful where running an electrical line would be heavy.
What the housing of a solar LED spotlight really contains
Three elements decide the result: panel size, battery capacity, LED quality. A twilight sensor switches the spotlight on at nightfall, a motion sensor reserves it for passers-by. The housing is judged on its water and dust protection rating, with IP65 a common benchmark for permanent outdoor use, and on its impact resistance on an exposed facade. Metal housings age better than thin plastic, and white finishes blend into a light wall.
How the light triggers on solar lighting with a sensor
The twilight sensor activates night mode, the spotlight then only waits for movement. The sensor, often infrared, switches the LED on for an adjustable duration. A well-placed solar outdoor light follows this cycle from sunset to early morning, with no intervention and no wiring.
What are the drawbacks of solar lamps?
A solar spotlight depends on the sun: in winter, in overcast weather or if the panel stays in the shade, battery life drops and the light lasts less long. Its brightness generally stays below that of a mains-connected spotlight, and the battery wears out over the years. The panel needs a minimum of maintenance and correct orientation.
Battery life in winter and in grey weather
Less sun means less charge. A panel facing south and clear of cast shadows remains the best insurance, but the season reduces both duration and intensity. For an adjustable outdoor fixture used all year round, aim for accent, signage or circulation rather than permanent lighting.
Range and intensity: why a solar spotlight lights less than a wired one
A wired spotlight draws its power from the grid with no reserve limit. Solar works on the energy stored the day before: shorter range, tighter beam, duration conditioned by the charge. A living room, a hallway or a covered passage therefore need another solution, connected to the mains.
Where to install a solar LED spotlight: terrace, garden, facade or driveway?
A solar spotlight goes where the cable is missing: facade near the front door, terrace wall, driveway and flowerbed on a spike, outdoor step, outbuilding at the bottom of the garden. The common point: the panel must see the sun for several hours a day, without the shadow of a wall, a hedge or a roof. Exposure decides before style.
Outdoor solar LED spotlights: front door and facade
Near a door, look for a short beam that lights the threshold and the lock without glare. An adjustable model is set once installed, a recessed model blends into the render. Designer outdoor spotlights play their part here: visible by day, discreet once evening comes.
Outdoor solar light: driveway, flowerbed and planted spike
A spike spotlight plants into the ground, between two perennials or along a border, and lights downwards. On an outdoor step, better to choose an adjustable model fixed to the riser, aimed at the step and never into the eyes.
| Zone | Recommended format | Mounting | What to check |
|---|---|---|---|
| Entrance and facade | Adjustable or recessed | Screwed to the wall, panel clear | Exposure and motion triggering |
| Driveway and flowerbed | Spike | Planted in the ground | Spike height and beam width |
| Terrace and wall | Recessed or adjustable | Recessed or screwed | Discretion once switched off |
| Outdoor staircase | Adjustable, short range | Riser or side wall | Beam aimed at the step |
| Isolated yard or shed | Solar floodlight | Pole or facade | Panel free of cast shadow |
Recessed, adjustable or spike solar spotlight: which shape to choose?
A recessed solar spotlight sinks into the wall or the terrace and lights a precise point. An adjustable model is aimed by hand to target a step, a tree or a sign. A spike spotlight plants into a flowerbed. The format is chosen according to the support and the surface to cover, not according to fashion.
Recessed solar spotlight: when the wall or terrace must stay clean
Recessing requires a cut-out in the support, to be prepared before installation. In return, the wall stays smooth and the fixture disappears. Recessed models for wall and terrace also suit a base course or a wooden deck.
Solar floodlight or spotlight: which beam width to aim for
The floodlight lights wide and sits high, with the panel sometimes separate to capture more light. The spotlight concentrates on one point. On a large yard, compare outdoor LED spotlights before multiplying light points.
| Format | Where it goes | Beam type | Point of vigilance |
|---|---|---|---|
| Recessed | Wall, terrace, riser | Aimed and short | Cut-out to plan |
| Adjustable | Wall, corner, pole | Hand-adjustable | Orientation to review after installation |
| Spike | Flowerbed, lawn, driveway edge | Towards the ground | Height suited to the zone |
| Floodlight | Facade, pole, outbuilding | Wide | Panel clear of any shadow |
Solar LED spotlight with motion sensor: which setting and which maintenance?
On many models, sensitivity, lighting duration and sometimes intensity are adjustable, which avoids unnecessary triggering when a cat or a branch passes. For maintenance, clean the panel and the sensor with a soft cloth, without abrasive product, especially after a season of dust or pollen.
Settings: sensitivity and lighting duration
Three values appear in the specs: detection range, lighting duration after triggering and start-up mode, twilight or permanent. Set it short on a passage, longer on a house entrance. A dark housing stays discreet on a dark facade, a light model on a render.
Panel and battery: maintenance season by season
A dirty, shaded or badly oriented panel is enough to make the lighting drop: cleaning is part of how it works, not a detail. Also check the mountings after winter and the condition of the housing seal. The battery, when accessible, is replaced at the end of its life, which extends the installation.
Can a living room, a kitchen or a bedroom be lit with a solar LED spotlight?
No. Indoors, the panel does not receive enough direct light to recharge the battery, and a living room needs continuous, adjustable and often dimmable light. For a living room, a kitchen or a bedroom, stick to mains-connected spotlights, recessed or adjustable. Solar keeps its ground outdoors.
Living room LED ceiling light and LED wall light: the indoor solutions
To light a room widely, a mains-connected ceiling light or wall light remains the basis. Living room solutions cover the reading corner as well as the television wall, and kitchen spotlights go above the worktop, where the light must fall straight.
Living room LED chandelier: when lighting becomes decorative
Above a table or in the centre of a room, the fixture also carries the decoration. A Designix fixture chosen for its line lights as much as it furnishes. In a living room, a central point is often combined with adjustable spotlights for the zones.
Cuttable LED strip and bedroom light: how it works
A cuttable LED strip is cut at the printed marks, then connected to a suitable power supply: it lights a continuous line under a shelf. In a bedroom, better to choose a soft bedroom light, on dimmer control, rather than a fixed point that is too marked.
Is solar LED lighting really free?
Solar removes the wiring and the electrical consumption of the lighting, not the cost of the equipment: you need the spotlight, its panel, its battery, and you must plan their replacement over time. The gain is measured mainly in avoided work, where running a line would be heavy or impossible.
Free solar LED lighting for farmers: what it covers in a yard or shed
Towards a shed, a stable or the back of a plot, solar avoids digging and connecting. It secures circulation, signals a gate, lights a passage area. It does not replace permanent work lighting, whose battery life does not depend on the weather.
Panel, battery and LED: what has a cost in the installation
The price plays out on three items: panel surface, battery capacity, quality of the housing and its seals. An entry-level model is enough for a driveway, a more elaborate model is justified on an exposed facade. The choice is made on use, not on the promise of free energy.
Which mistakes to avoid before buying a solar LED spotlight?
The most frequent mistakes: installing the panel in the shade, choosing a format unsuited to the support, forgetting the protection rating in a very exposed zone, and multiplying light points without thinking about distribution. First define the zone to be lit, then the type of triggering expected, then the format.
Solar spotlight: the checks to make on the product page
Four lines are enough: the accepted support, the presence of a sensor, the protection rating and the colour of the housing. Also look at whether the battery is accessible, because a replaceable battery extends the life of the fixture, and whether the panel is attached to the housing or placed at a distance to capture better.
Distributing your light points well outdoors
Two or three well-placed points are worth more than a tight row. Light the threshold, the first step, the bend in the driveway, then leave the rest in half-light: contrast is what guides the eye. Compare white outdoor spotlights and black finishes according to the wall shade before ordering.
Buying at Designix: secure payment, tracked delivery, possible returns and customer service to help you choose the right format before installation.
Browse the outdoor solar LED spotlights and their solar variants to find the model that matches your wall, your driveway or your yard.
Frequently asked questions about solar LED spotlights
Where to place an outdoor solar LED spotlight so it captures enough sun?
Choose a support that sees the sun for several hours a day: exposed facade, terrace wall, clear driveway edge, a spike in the middle of a flowerbed rather than under a tree. Avoid places where the shadow of a wall, a hedge or a roof falls on the panel in the middle of the day.
Does solar LED lighting with a sensor also switch on at night?
Many models combine motion detection and start-up at nightfall: the spotlight stays off as long as nobody passes, then switches on. Check in the product page whether triggering happens at twilight, permanently or only on movement.
Solar LED floodlight or solar spotlight: what is the difference?
The floodlight lights wide, with a panel often separate and placed higher: it suits yards, outbuildings and large facades. The spotlight concentrates the light on a reduced zone, a step or a passage, and is more discreet once switched off.
Can the bulb of a solar LED spotlight be replaced with a classic LED bulb?
On most solar spotlights, the LEDs are built into the housing and cannot be replaced: the whole spotlight is changed at the end of its life, or its battery when accessible. A classic LED bulb works on a mains-connected fixture, not on a solar panel.
Living room LED ceiling light: how to light the living room without going solar?
A living room recharges poorly in the sun: light it with a mains-connected fixture. Depending on ceiling height and use, a ceiling light diffuses light widely, while recessed or adjustable spotlights light a painting, a bookcase or a reading corner.
Powerful LED wall light: in which cases to prefer it to a solar spotlight?
An LED wall light connects to the mains: it lights continuously, without depending on the weather or the panel exposure. Choose it for an entrance, a hallway or a living room wall that must stay lit for a long time, where a solar spotlight serves as a one-off outdoor accent.
Cuttable LED strip: how does it work?
A cuttable LED strip is cut at marks printed on the circuit, then connected to a suitable power supply and connector. It lights a continuous line behind a shelf or under a piece of furniture, which a one-off solar spotlight cannot do.
Free solar LED lighting for farmers: what does solar really cover?
Solar avoids running an electrical line to a shed, a yard, a stable or the back of a plot: the spotlight works without grid consumption. It does not replace permanent work lighting, because battery life depends on sunshine and battery capacity.





