Outdoor LED wall lights with motion sensor

A motion detector outdoor wall light fixed to the wall lights an entrance, a facade or a terrace: the light comes on as you pass and goes off afterwards, with no switch to look for in the dark. Check three criteria before ordering: the wall's exposure, the light temperature you want and the size of the fixture.

What is a motion detector outdoor LED wall light?

It is a wall fixture fixed to a facade whose LED comes on as you pass and goes off afterwards, with no switch to look for in the dark. In this selection, the light source is integrated LED, the shapes range from square to arc and tube, and the dominant finishes are black and white.

What the detector changes once evening comes

With your hands full of shopping or holding a child, you no longer have to put your bags down to find a switch: the light comes on as you approach and fades once you are through the door. The same behaviour helps in the evening on a terrace, where you step outside without lighting up the whole house. The detector also limits the actual lighting time, which affects consumption.

Integrated LED or G4 socket: what it means at fitting time

Most models in the selection run on integrated LED: nothing to plan on the bulb side, the module is part of the fixture. One model is the exception with a G4 socket, on a solar version that also includes a dimmer. Check this point before buying if you want to be able to change the light source yourself.

How to choose a motion detector outdoor LED wall light

Three criteria are enough: the protection rating (IP65 for a wall exposed to rain, IP54 or IP44 for a sheltered passage), the light temperature (warm white for a welcoming entrance, cool white for a facade to secure) and the size. Then check the shape, the colour and the wattage.

IP65, IP54 or IP44: which rating for which wall?

IP65 dominates the selection, which matches a facade wall receiving rain and splashes. An IP54 works under a canopy, an IP44 on a covered terrace where water does not reach the fixture directly. Our selection of IP65 rated models gathers the references built for full exposure.

Warm white, neutral white or cool white: which light for an entrance?

Warm white, around 2700 to 3500 K, warms an entrance and suits older facades. Neutral white, from 3500 to 4500 K, keeps a natural look while lighting clearly. Cool white, from 4500 to 6500 K, gives a crisp light that clearly marks out a path or a gate, with a less cosy feel near a door.

Power, dimensions and shape: matching the wall light to the facade

The actual wattages in the selection range from 6 W to 18 W. A square format of 26 x 12.5 cm or 29 x 9 x 10 cm structures a wide wall, while a cylindrical model 10 cm high or an arc 10.5 cm wide stays discreet on a narrow wall. These measurements also determine the clearance to keep from a door or window.

Which wall light for an entrance, a terrace or a long facade wall?

For an entrance, an 18 W square wall light in IP65 lights the threshold clearly; for a sheltered terrace, a 7 W arc or tube model is enough; for a long facade wall, a wide format such as 29 x 9 x 10 cm covers the surface better than a compact wall light.

Under a porch or beside the front door

The SensorLux detector wall light measures 26 x 13 x 10 cm and offers all three white temperatures: handy when you are still unsure about the mood. The SécuriLuxe light uses a longer format of 29 x 9 x 10 cm, which makes more of a statement above a wide door. Both are IP65 with 18 W.

Along a terrace or a garden wall

On a covered terrace, the Astrum arc wall light diffuses warm white at 7 W with an IP65 rating, in a compact 10.5 cm body. The Luvia arc version uses the same format in IP44, better suited to a permanently sheltered wall. To go further, see our terrace wall lighting.

Which powerful LED wall light to light a path or a gate?

In this selection, the brightest models claim 18 W in integrated LED and IP65, against 6, 7 or 9 W for the cylindrical, tube, arc and solar formats. A single 18 W LED covers a wider area around a door, with an even output and no marked hot spot.

Aiming the light without dazzling passers-by

A powerful fixture placed too low sends its light into the eyes of whoever is arriving. Fixed higher and aimed at the ground, it lights the step and the threshold without glare. On a long wall, it is better to spread several points than to concentrate a single 18 W in the middle, and our modern style gathers the formats suited to that distribution.

What light colour changes when reading a facade

A stone facade lit in cool white takes on a grey, hard look; in warm white, it keeps its nuances. Conversely, a path to secure benefits from a crisp light, close to 4500 K and above. The Sensoria anthracite frame offers exactly that choice between warm white and cool white.

How to install a motion detector outdoor wall light

Fix the wall light on a flat surface, at eye level around the door, away from direct water jets and any heat source. Wiring is done on a flush-mounted box; check the cable gland seal and that the screws are tight before switching the power on.

At what height should the wall light be fixed near a door?

As a rule, the wall light is fitted at eye level, around 1.80 m to 2.20 m from the ground, which places the beam above the shoulders and lights the arrival area. On an insulated facade wall, a lower height works if the light is aimed downwards. Always keep the fixture a few tens of centimetres away from a glazed door to avoid reflections.

Sealing, cable gland and switching on

The cable gland seal must stay in place and the cable should run in a slight downward slope under the wall light, so that water cannot travel back up through the gland. Tighten the screws on a stable surface, without forcing on crumbly render. Only switch the power back on once the cover is closed. The waterproof references for exposed walls are designed for that exposure.

Square, oval, arc or tube: which shape and colour for the facade?

The square dominates this selection and suits contemporary facades; the oval and the tube lengthen a narrow wall; the arc softens an older entrance. On the colour side, black blends into a dark wall, white stands out on light render, gold highlights a front door.

Black, white, gold or anthracite: matching the wall light to the wall

Black accounts for most of the available finishes, with grey and anthracite variants that disappear on a dark wall; our anthracite and grey shades gather several of them. White stands out on light render and draws more attention, as on the white models. Gold remains rare and works as an accent, best kept for a door you want to highlight, like the black finishes that stay the most versatile choice.

What sets a designer outdoor wall light apart from a standard model

The difference comes down to three visible things: the design of the frame, the way the light leaves the glass or acrylic, and how neat the fixings are. A narrow frame and frosted glass give a softer result than a thick plastic housing. The designer outdoor wall lights and the designer LED wall lights gather the crafted shapes in the selection.

Can an outdoor LED wall light be fitted in a living room or bedroom?

Yes, provided you choose a suitable rating: the IP44 and IP54 models in the selection work in a sheltered indoor passage, while IP65 is justified near a shower or an open window. For a living room or bedroom, indoor LED wall collections offer more shapes and finishes.

In a living room or bedroom: which model to choose

A compact model such as the Lapidus cylinder at 6 W and IP54 fits in a hallway or a reading corner without taking over the wall. For a real indoor project, the LED wall lights for living rooms offer more varied shapes and the LED wall lights for bedrooms softer light. The motion detector wall lights work well in hallways and on staircases.

Dimmer function: what some models offer

The dimmer function remains rare in the selection and mainly concerns the solar versions, such as the Eior solar version, which combines a G4 socket, an integrated panel and a dimmer. It avoids any wiring when no cable can be run to the wall. Find these references in the solar versions with no wiring and the dimmable wall lights.

Which mistakes should you avoid with an outdoor detector wall light?

The most common mistakes: fitting an IP44 model on a wall battered by rain, placing the wall light behind a hedge or under an overhang that hides the passage, choosing a cool white in front of a warm entrance, and forgetting to check the socket when the LED is not integrated.

A protection rating too low for the wall

The protection rating is chosen on the wall's actual exposure, not on how the fixture looks. A west-facing wall takes the full force of the rain, a recess under a canopy stays dry. If any doubt remains, take the higher rating: the outdoor LED wall light in IP65 can still be used on a sheltered wall, whereas the opposite is not true.

Maintenance, warranty and durability of the fixture

A soft cloth and a little soapy water are enough, with no abrasive product and no direct jet on the fixture. On cover, most of these references come with a two-year warranty, and a few models up to five years; keep your invoice and check the terms when you order.

Ordering a motion detector outdoor LED wall light from Designix

Payment is secure, delivery is tracked and returns are possible; Designix customer service answers questions about fitting and compatibility. The current price of each reference is shown directly in the collection grid.

Unsure between an 18 W square and a 7 W arc format? Look at the wall in question, note its width and exposure, then compare with the Terralux oval format or the LuminMotion tube model. To widen your search, browse outdoor motion detector wall lights then all our light fixtures, or go straight to the full range of motion detector wall lights.

Frequently asked questions