Designer outdoor spotlights

This selection is also available in our French store: Spots d exterieur design

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right light output?
Allow about 100 to 300 lumens per m²: about 150 lm/m² for a living room, about 350 for a kitchen. Each product page lists the lumens.
At what height should the light be installed?
Above a table: 70-85 cm from the tabletop; in a walkway: at least 2.10 m of clearance below the bulb.
What type of bulb?
Usually E27 or E14, sometimes GU10. Specified on each product page.
Compatible with LEDs and dimmers?
Yes, in most cases; for use with a dimmer, look for the “dimmable” mention.
Designer outdoor spotlights
Designix · Design lighting

Light changes everything

From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

An outdoor spotlight is chosen first by the area it lights, then by its style: recessed into the slab for a patio, spiked for a path, adjustable on a wall bracket for a facade. The IP rating and the socket then decide how long the model lasts. This guide sets out the criteria, without padding: it helps you choose right.

Which modern outdoor spotlight should you choose for the area to be lit?

Start with the ground: a path reads at night with three or four low, evenly spaced points, a patio stays alive with flush spotlights that graze the decking, a facade is drawn with a beam angled downwards. The mounting type follows from that area, not the other way round.

Three families cover almost every need: the recessed ground light, which requires a housing in the slab or patio, the spiked model, which is planted in a border without tools, and the adjustable wall bracket, screwed to the wall. To compare installations, browse the recessed outdoor spotlights and the adjustable models.

Recessed or spiked outdoor spotlights: what is the difference?

The recessed one disappears into its surface: only a flush glass remains visible, giving light that seems to come out of the ground. It is prepared before the slab, with a housing and cable conduit. The spiked model, on the other hand, moves: you replant it if the path changes, you move it closer to a shrub. It holds less well in very loose soil and sometimes topples when a dog passes.

How do you light a garden path without glare?

Aim at the ground, never at the eyes: a beam pointing down lights the path, a horizontal beam dazzles. Space the points two to three metres apart depending on the width of the path, and keep the outer edge clear so you do not draw too hard a line. Solar spotlights with no wiring work well on a border far from a socket.

Which type of outdoor spotlight for which area
Area to light Type of spotlight Mounting Point to check
Path and border Spiked spotlight Stake planted in the ground Beam height, sunlight if solar version
Patio and slab Recessed ground spotlight Housing in the slab High IP rating, flush glass
Facade and wall Adjustable wall bracket Wall mounting Beam set towards the ground
Border and garden Spiked spotlight or floodlight Stake or base plate Distance to plantings
Stairs and threshold Spotlight recessed in the step or wall bracket Recess or screw fixing Glare at eye level
Covered patio Ceiling recessed spotlight or wall bracket Recess or screw fixing IP suited to water splashes

What IP protection rating does an outdoor spotlight need?

An IP44 is enough under a canopy, an IP65 withstands water jets in exposed outdoor areas, an IP67 tolerates temporary immersion in waterlogged ground. In other words: the lower the spotlight and the more water it receives, the higher the rating must be. A ground recessed light under a watered lawn does not settle for the minimum.

The first digit of the IP rating concerns dust, the second water. On a patio, it is the second that decides how it holds up over time: a poorly protected seal lets moisture in, the housing fills, the contact corrodes. Choosing a well-protected LED outdoor spotlight often costs less than replacing an undersized model.

IP ratings: what an outdoor spotlight withstands
Rating Withstands Typical location
IP44 Water splashes Under a canopy, covered patio
IP65 Water jets Facade, exposed patio, garden
IP67 Temporary immersion Recessed in waterlogged ground
IP68 Continuous immersion Very wet area, pool edge

Can an IP44 spotlight stay outside all year?

Yes if it is genuinely sheltered: under a canopy, a roof overhang, a covered patio. No if it receives driving rain or the jet of a garden hose, because water will eventually get in at the seal and the cable glands. In a sheltered area, IP44 holds; in an exposed area, go for IP65.

Patio spotlight: IP65 or IP67?

IP65 covers rain and jets, which is enough for a facade wall bracket or a spotlight placed on a coping stone. IP67 is justified when the spotlight is recessed into the ground, where water stagnates after a storm, or near a pool. Choose the rating according to mounting height, not according to the most expensive range.

Modern LED or halogen outdoor spotlight: what should you choose today?

LED is the obvious choice for a new project: it gives off little heat, which matters near a wooden patio, a hedge or a blind. A modern halogen keeps its interest for replacing an existing source with the same socket, without changing anything else. In both cases, check the socket and the transformer before buying.

On a facade, the heat of a halogen can be felt thirty centimetres from the glass: it scorches an awning or yellows a render if the housing is too close. Integrated LED settles the question, but cannot be replaced: the whole housing changes at end of life. Conversely, a model with a replaceable bulb can be repaired.

For a complete refit, compare the modern LED outdoor spotlights with the recessed LED outdoor spotlights.

Can you put an LED bulb in a halogen spotlight?

Yes if the socket is identical and the bulb is approved for the fixture. A GU10 halogen spotlight is directly replaced by a GU10 LED bulb. Check the length of the bulb: some LEDs with a heatsink protrude beyond the glass and prevent the seal from being refitted.

Do you need to change the transformer when switching to LED?

Not always, but often. An old ferromagnetic transformer drops out when the load falls too low, causing flickering or failure to light; a recent electronic transformer more readily accepts a reduced LED load. Note the minimum load marked on the housing before changing the source.

Sources and sockets: what can be replaced
Source Socket Where you find it To check before changing
Halogen GU10 Older outdoor spotlights Replaceable with a GU10 LED bulb
LED with socket GU10 or E27 Spotlights with replaceable bulb Transformer and approved bulb
Integrated LED None Modern spotlights and floodlights Non-replaceable source

Adjustable outdoor spotlight: what is it for on a facade?

An adjustable spotlight is set after installation to aim at a wall, a shrub or a house number without moving the housing. On a facade, angle the beam downwards to avoid glare from the street. It is often the setting, more than the source, that changes how a wall looks.

The gesture is simple: tighten the ball joint moderately, adjust, then check at night from outside the lit area, at the spot where a visitor will pass. A beam that is too wide washes out the wall, a narrow beam draws a patch. Recessed and adjustable at once give this flexibility at ground level.

How do you aim an outdoor spotlight to avoid glare?

Aim below the line of sight: towards the bottom of a wall, towards the planting to be highlighted, towards a path. Avoid angles that send the beam towards a window or a neighbouring patio. A model with a grille or frosted glass softens the brightness when the source remains visible.

Adjustable or fixed spotlight for outdoor stairs?

Stairs are generally handled with fixed fixtures, recessed into the riser or the step, to light the nosing without casting a shadow. The adjustable one is reserved for the threshold, the front door or a low wall. For indoors, hallway spotlights follow the same logic.

Solar outdoor spotlight: when is it really enough?

A solar spotlight is installed without wiring: it suits a path, a border or a border far from a socket, with a panel exposed to the sun. To light a facade or a daily passage, a wired spotlight remains more consistent, because it does not depend on the light captured the day before.

The right question is not the model but the position of the panel: six hours of direct sun per day give a correct result, an area shaded by a wall or a tree gives weak and short light. Solar is a choice of location before being a choice of product. Go for the solar LED spotlights if the area is open.

Where should you place a solar spotlight so it captures light?

Aim the panel towards the south, with nothing between it and the sky: a low wall, a flower pot or a hedge is enough to halve the capture. Move the panel away from the spotlight when possible, to light a shaded area while keeping the sensor in the sun. Clean the panel twice a year.

Does a solar spotlight light enough in winter?

In winter, it captures less and gives back for less time. It remains useful as a night light, to mark a border or the back of a garden, but does not replace functional lighting for a passage. For stairs used every evening, prefer a wired supply.

How do you install and maintain a modern outdoor spotlight?

Mark out the area, check the cable route, then install: housing in the slab for a recessed model, planted stake for a spiked model, wall screwing for a bracket. Connecting to the mains is best entrusted to an electrician. Maintenance is limited to dusting the glass and refitting the seal.

An already poured patio does not rule out recessing: a clean housing can be core-drilled if the slab thickness allows and the cable passes. If in doubt, a spiked model or a bracket avoids cutting. For ground models in the LED family, see the recessed LED outdoor spotlights and the modern spotlight range.

How do you install a recessed spotlight in a patio without breaking everything?

Locate the axis of the existing conduit, mark the centres in pencil, core-drill a housing at the diameter of the housing, then pass the cable before sealing. Test the lighting before finishing. If no sleeve passes, give up on recessing and turn to a bracket or a stake.

How do you clean the glass of an outdoor spotlight without damaging the seal?

Cut the power, wipe with a soft cloth and a little warm soapy water, rinse without a direct jet. Limescale comes off with diluted white vinegar, never with a scraper. Check the seal at every cleaning: a seal that has come out of its groove lets water in, and the spotlight starts to flicker.

What colour of outdoor spotlight for a light facade or a garden?

The colour is chosen with its surface: a white housing disappears on a light render or a grey patio, a black housing fades into a fence, a dark low wall or earthy ground. The rendering of the light, meanwhile, depends on the source and the orientation, never on the colour.

Look at the joinery and the coping stone before deciding: a spotlight that matches the tone of the render blends in, a contrasting spotlight stands out and becomes a graphic detail. For integration, explore the white finishes for light render and the black housings for dark walls.

White or black outdoor spotlight: which is less visible?

On a cream wall or a concrete slab, white blends in. On a dark wooden fence, a stone or a low wall, black becomes invisible. A colour that does not fit draws the eye more than it should, especially on a lightly textured facade. Take a photo of the surface and compare in your mind.

How do you match spotlights with garden furniture?

Stick to a single metal per area: a black spotlight with a black garden lounge frame, a white spotlight with light-coloured seats. For a teak patio, a dark colour harmonises well. The LED versions in white and the adjustable LED outdoor spotlights cover these matches.

How do you choose between several modern outdoor spotlights?

Sort your needs by area, then apply three filters in this order: the IP rating according to exposure, the mounting type according to the surface, and the socket according to ease of replacement. Colour temperature comes last, with a simple guide: around 2700 to 3000 K for warm light near a house, more neutral for a pathway.

A narrow beam highlights a plant, a wide beam lights a path. Avoid mixing several temperatures on the same facade: the difference shows immediately at night. For something close to the house, look at the modern LED spotlights and the modern recessed spotlights.

Do you need a dimmer on outdoor spotlights?

Useful on a covered patio where you adjust the mood from dinner to tidying up, less so on a path. A dimmer requires a compatible source: not all LED spotlights are, and the result may buzz or flicker. Check this compatibility in the dimmer-compatible spotlights.

What mistakes should you avoid when buying?

Choosing an IP that is too low for a ground recessed light, forgetting the conduit before the slab, mixing two temperatures on the same facade, choosing a housing colour that clashes with the wall. Add one more: ordering without checking the available recess depth.

Frequently asked questions about modern outdoor spotlights

Can you replace a halogen spotlight with a modern LED outdoor spotlight?

Yes, provided you respect the socket and the transformer. A GU10 halogen spotlight is replaced by a GU10 LED bulb, which reduces the heat given off near wood and plantings. If the spotlight runs on a transformer, check that it accepts an LED load before changing the source.

Which outdoor spotlight should you choose for a wooden patio?

A recessed spotlight with flush glass or a bracket aimed downwards suits a wooden patio: the beam grazes the decking without dazzling. Favour a low-heat source, such as LED, and a high IP rating if the patio stays outside all year.

Does a ground recessed spotlight cause glare from the patio?

A recessed spotlight can cause glare if it is aimed upwards or placed in the line of movement. Choose an adjustable model, set the beam towards the wall or the planting to be highlighted, and check the result at night, from where you sit.

Do you need an electrician to install outdoor spotlights?

A spiked or solar spotlight is installed without wiring. As soon as a recessed light or a bracket has to be connected to the mains, the connection is best entrusted to an electrician, who checks the circuit, the protection and the cable route before installation. Plan the conduit before pouring a slab.

Designix reviews: how does an order for outdoor spotlights work?

You choose within the collection, then the order is paid by secure payment, with tracked delivery and possible returns. The Designix customer service answers before and after purchase, particularly on the socket, the IP rating and the mounting to plan for your patio or facade.

Does a solar spotlight light enough in winter?

In winter, a solar spotlight captures less light and therefore gives back for less time. It remains suited to a border or the back of a garden without mains, but for a daily passage or to highlight a facade, a wired spotlight gives more consistent lighting from one evening to the next.

To go further, compare the families in all our light fixtures, then refine by installation and by shade. The modern LED outdoor spotlight hub groups the wired models, the white selection and the black selection handle integration. Secure payment, tracked delivery, possible returns and Designix customer service to confirm socket, IP and mounting before ordering.

Our advice for choosing
Designer outdoor spotlights illuminate a terrace, garden or facade without adding a visible technical block: recessed into the ground or slab, adjustable, sometimes solar-powered, they are chosen according to the area to be lit, the protection rating and the socket.