Motion-sensing LED floodlights

Start by counting the area to cover: a hallway or staircase needs only a 500 mm 18 W wall-mounted spotlight, while a large wall section or an entrance calls for a 1,000 mm 36 W model. The entire selection is made of aluminium, IP65 protected, in dark brown or graphite, including an adjustable version to direct the beam.

• How to choose an LED security light with motion sensor
• What is the best motion sensor spotlight
• Presence detector or motion sensor
• Where to install an LED security light with motion sensor
• LED spotlight or wall-mounted spotlight
• Solar or mains powered
• Installation and maintenance
• Budget and warranty

How to choose an LED security light with motion sensor

The choice rests on three points: the area to cover, the protection of the housing and the power. This selection brings together wall-mounted LED spotlights in aluminium, with an IP65 protection rating, in 18 W or 36 W, in dark brown or graphite. An adjustable model lets you direct the beam to the exact spot to be lit.

Indoor LED security lights with motion sensor

Indoors, you want a housing mounted flush against the wall, lighting the passage without cluttering the floor. The wall-mounted spotlights in this collection are installed high up in a hallway, staircase, entrance or dressing room, and the light travels down the wall instead of shining into your eyes. For a room where you remain seated, a simple motion sensor quickly shows its limits: see the bedroom lights and the waterproof models designed for damp rooms.

Power, protection rating and direction: the three criteria

Power determines the surface covered: 18 W for a short wall, a threshold or a step, 36 W for a wide entrance or a facade. The aluminium housing dissipates heat and lasts over time. IP65 indicates resistance to dust and water jets, a useful marker near a terrace or a bathroom. Direction, finally, changes everything when the area to be lit is not straight. The Zambelis 18 W dark brown wall-mounted spotlight illustrates the most understated format, to compare with all our wall lights.

What is the best motion sensor spotlight?

There is no single model: the right choice depends on the surface to be lit and the exposure. In this selection, the wall-mounted LED spotlights are made of aluminium with an IP65 protection rating, available in 18 W and 36 W, in dark brown or graphite, including an adjustable version.

Zambelis 18 W or 36 W wall-mounted spotlight

The length of the profile determines the width of the wall lit. The 500 mm model, at 18 W, suits a hallway, a staircase or a small entrance. The 1,000 mm model, at 36 W, covers a larger wall section and is placed on a facade or a spacious entrance. Both are powered at 24 V and supplied without an integrated driver. The Zambelis 36 W dark brown wall-mounted spotlight is the long version of the same family.

Adjustable version: when it changes everything

When the wall does not face the area to be lit, a fixed head forces you to light at an angle. The adjustable model corrects this: the beam is set after installation, without redoing the mounting. It measures 123 mm high for 1,000 mm long, remains in IP65 aluminium, in a graphite finish, and includes its driver, which simplifies the connection. See the Zambelis 36 W graphite adjustable wall-mounted spotlight.

What is the difference between a presence detector and a motion sensor?

A motion sensor reacts to movement: the light turns on when someone enters the area and turns off after an adjustable time. A presence detector also detects a still person, which is better suited to occupied rooms such as a living room or a bedroom where you remain seated.

Where each type of detection makes sense

A hallway, a staircase, a garage or a threshold are not places where you stay: you pass through them. Motion activation is enough, and automatic switch-off prevents forgetfulness. A room where you settle in, a living room, a bedroom, an office, cuts out badly if mere stillness is enough to switch it off. Indoor LED security lights with motion sensor are therefore reserved for passages and service areas. For occupied spaces, a classic switch or a presence detector is better. The full range of motion sensor spotlights remain mostly on this principle.

On-time and range: what you adjust after installation

Two settings matter more than the others. The time delay, first: too short, the light goes out before you finish the journey; too long, it stays on for nothing. The range, second, to be adjusted so it does not trigger from the street. These settings are made once the housing is installed, by walking through the area to check the triggering. A badly aimed sensor is spotted immediately: it turns on when no one is coming.

Where to install an LED security light with motion sensor?

These wall-mounted LED spotlights are suitable for the hallway, staircase, entrance, living room, bedroom, bathroom and terrace. Fixed high on a wall, they light downwards or at an angle depending on the model. The IP65 rating and aluminium make them usable near a water point.

Hallway, staircase and entrance

In a hallway, the wall-mounted spotlight replaces several small light points: a single 500 mm housing is enough to mark the passage. In a staircase, the goal is to light the step without creating a cast shadow, which requires placing the housing high enough and adjusting the beam towards the flight. At the entrance, you want both to welcome and to light the threshold: the long 36 W version covers a large wall section better. The Zambelis 36 W dark brown wall-mounted spotlight targets this configuration.

Living room, bedroom, bathroom and terrace

In a living room, the wall-mounted spotlight serves as accent lighting on a wall section rather than main lighting. In a bedroom, keep it away from the bed to avoid glare on waking. In a bathroom and on a terrace, IP65 becomes the primary criterion. For the exterior of a house, also see the outdoor lights for the garden and the solutions for lighting a garage.

LED security light with motion sensor or wall-mounted spotlight: what are the differences?

An LED security light with motion sensor concentrates the flow on a precise point, for example a step or a threshold. A wall-mounted spotlight spreads the light along the entire height or length of a wall, in 500 mm or 1,000 mm depending on the model, which is better suited to a hallway or a facade.

LED security light with motion sensor

The spotlight aims. It lights a step, a handle, a door number, and is installed where the passage is narrow. Its light is more concentrated, therefore more contrasted: useful for guiding the eye, less comfortable as general lighting. In a long hallway, you will need several spotlights where a single wall-mounted spotlight would suffice. The LED spotlights cover both approaches depending on the format chosen.

LED floodlight with motion sensor: for large surfaces

When the surface widens, you increase power and change family. An LED floodlight with motion sensor lights a courtyard, a car park or a farm building, with a range unmatched by a wall-mounted housing. For a house, the question arises mainly for a driveway or a garage. See the outdoor lights and the family of LED spotlights.

Solar or mains-powered LED security light with motion sensor?

A solar model is installed where no cable can be run: it captures energy during the day and lights at night. A mains-powered model, like the 24 V wall-mounted spotlights in this selection, keeps a constant intensity and does not depend on sunlight. The choice therefore depends on access to power.

Solar LED security light with motion sensor

Solar solves a site problem above all: no trenching, no cable to run to the bottom of the garden or along a boundary wall. In return, brightness varies with the season and the exposure of the panel. On a shaded wall, the result disappoints. For a shed, a gate or a garden shelter, it is often the only realistic solution.

24 V models and the model with integrated driver

The two 500 mm and 1,000 mm models operate at 24 V and are installed without an integrated driver: the power supply is planned separately, which requires a little anticipation at the time of connection. The adjustable graphite version, however, includes its driver, so a more direct connection. In both cases, low voltage requires checking the cable cross-section over a long distance. The rechargeable spotlights and floor-standing spotlights cover needs without fixed installation.

How to install and maintain a wall-mounted LED spotlight?

The spotlight is fixed to a load-bearing wall, high enough so the flow does not shine into your eyes. The beam is then adjusted towards the area to be lit, without aiming at a window or a mirror. An IP65 aluminium housing is cleaned with a soft cloth, without abrasive product.

Wall mounting and power supply

Two housing heights coexist in the selection: 89 mm for the dark brown models, 123 mm for the adjustable version, with a 40 mm profile in both cases. Plan a fixing in a solid support, or plugs suited to a hollow wall, and check the tightness: a housing that moves ends up cracking its seal. The connection is made with the power off. For damp rooms, check the continuity of the seal before closing.

Beam adjustment and maintenance

Once installed, direct the flow towards the floor or along the wall, never towards a window, a mirror or the road. A soft cloth is enough for aluminium, without solvent. Check once a year the condition of the seal and the absence of water in the housing. The dimmable wall lights and all Designix lights share these simple maintenance rules.

What budget should you plan for an LED spotlight and what warranty?

In this collection, the 18 W models are the most accessible and the 36 W spotlights, especially the adjustable version, sit higher in the range. The current price is shown on each product page, with secure payment, tracked delivery and returns.

Entry level or adjustable model

A project on a hallway or a staircase is handled very well with a 500 mm 18 W housing: it is the most understated format and the simplest to install. Moving up to 36 W is justified by the length of the wall to cover, not by a search for power. The adjustable version adds beam adjustment and the integrated driver, two elements that weigh in the decision when the configuration is not standard.

3-year warranty and customer service

The 3-year warranty covers all the models in this selection, in 18 W as in 36 W. Designix customer service supports the choice before ordering and remains reachable after delivery. Secure payment, tracked delivery and returns are part of the standard journey. You can compare outdoor lights and LED spotlights before confirming, then browse the lighting catalogue.

To go further: find the full range of motion sensor spotlights, the outdoor lights and all our lighting families.

Frequently asked questions about motion sensor spotlights

A cable to run, an occupied room, a corner wall: tell us the constraint, we will guide you to the right format. Secure payment, tracked delivery, returns and Designix customer service. Browse the full range of motion sensor spotlights and choose your length.