Powerful outdoor LED floodlight
This selection is also available in our French store: Projecteur extérieur LED puissant
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A high power LED floodlight is mounted high up and aimed at the surface to be lit: it is the aiming, more than the wattage, that decides the result. This page details power, beam, detection and installation so you can choose with confidence.
What power rating for an outdoor LED floodlight?
The wattage indicates consumption, not the amount of light: it is the flux, in lumens, that actually lights the scene. For a house facade or courtyard, a moderately powered floodlight that is well aimed is enough; high power ratings are reserved for large spaces, car parks and building sites, and require a suitable power supply. This collection contains no products at the moment, so no figures for power or flux can be given here.
High power LED floodlight 1000 W: in which cases?
Such a power rating is only justified for a stadium, a square or an industrial zone, with a dedicated circuit and a cable cross-section calculated accordingly. On a house, the protective devices were not designed for that load and the light produced would be excessive. Industrial floodlights for large volumes cover this need with mountings and power supplies designed for it.
High power outdoor LED lighting: reading power and luminous flux
On a specification sheet, look first for the flux in lumens, then check that it remains consistent with the stated watts: too large a gap between the two reveals an input error. The beam angle completes the picture, a narrow cone concentrating light far away while a wide cone spreads it close to the fixture. The range of outdoor LED floodlights should be read with these three values in mind.
Which outdoor LED floodlight for which surface and which height?
The surface to be covered and the mounting height determine the useful angle and power. A floodlight mounted high requires a tighter beam to avoid glare; a narrow path is fine with a wide beam and moderate intensity, aimed at the ground.
Lighting a facade, a courtyard or a path: the right references
A facade is lit with grazing light, the fixture placed a few metres from the wall and tilted towards it: the relief of the stone stands out instead of being flattened. For a courtyard, a wall-mounted floodlight fixed high up avoids running a cable along the ground. Along a path, the light should come down without hitting the eyes of anyone arriving, and garden floodlights are set up with this in mind.
At what height should an outdoor floodlight be fixed?
Around 2.50 to 3 m for an entrance or a garage, higher on a two-storey facade. The higher the fixture, the tighter the angle must be: the beam covers a wider surface without losing intensity. Staying below the roofline also limits nuisance for the neighbours.
| Area to light | What matters most | Recommended mounting | Useful option |
|---|---|---|---|
| Facade and entrance | Beam aimed at the wall, non-glaring light | Wall-mounted, high up | Motion sensor |
| Courtyard and path | Wide beam directed at the ground | Wall-mounted or on a stand | Dusk-to-dawn photocell |
| Garden and terrace | Ambience and discreet fixture | On a stand or low wall-mounted | RGB colour |
| Garage and workshop | Bright, even light | Wall or ceiling | High IP rating |
| Pool and poolside | Resistance to water and salt | Recessed or dedicated wall-mounted | Treated material |
| Building site and car park | Range and precise adjustment | On a stand or high wall-mounted | Lockable orientation |
Outdoor LED floodlight with or without a motion sensor?
The sensor switches the floodlight on when someone passes and off after an adjustable delay: handy for an entrance, a garage or a courtyard, and economical since the light does not stay on. Without a sensor, switching is done by a wall switch or a dusk-to-dawn photocell, which suits continuous facade lighting.
High power outdoor LED floodlight with motion sensor: for which uses?
Entrance, garage, courtyard, side passage: the light comes on when someone arrives and goes off afterwards. The right use remains that of supplementary lighting, not a facade you want lit all evening. Models with a built-in sensor avoid adding a separate box on the wall.
Adjusting range and delay without constant triggering
Aim at the passage area, not the street or the branches of a tree. A short delay is enough to cross a courtyard; extend it only if you walk through with your hands full. If it triggers repeatedly, lower the sensitivity before moving the fixture. Other LED floodlights with motion detection offer comparable settings.
High power outdoor LED floodlight or wall light: which to choose?
A wall light sits flat against the wall and diffuses light close to the surface, to light an entrance or highlight a facade. A floodlight projects light further and has an adjustable orientation, for a courtyard, a garden or a car park. The two complement each other: the wall light for ambience, the floodlight for range.
High power outdoor LED lamp: wall light, floodlight or both?
A wall light illuminates the wall it is mounted on and the area just in front of it, which suits an entrance or a base course. A floodlight, on the other hand, reaches far and can be aimed. On a long facade, combining both gives a readable wall and a lit ground. See the well-designed models when the fixture remains visible from the garden.
Two light points are better than one on a large facade
Two sources of lower intensity, crossed, erase the hard shadows cast by a single fixture. They are placed in a staggered arrangement, at different heights, and adjusted so they do not fight each other. The overall result stays softer than one very strong isolated point.
| Fixture | Typical use | Type of light | Installation |
|---|---|---|---|
| Outdoor LED floodlight | Courtyard, path, facade, car park | Directed, adjustable beam | Wall, stand or bracket |
| Outdoor wall light | Entrance, terrace, base course | Diffusion close to the wall | Flat against the wall |
| Outdoor lamp on a stand | Garden, building site, event | Aimable, mobile | Placed on the ground |
| Rechargeable floodlight | Corner without a socket, emergencies | White, sometimes colour | Placed or hung |
Which IP rating and which material for outdoor use?
The IP rating indicates resistance to dust and water; outdoors, IP65 is the usual reference, more if the fixture is exposed to water jets. The material of the housing matters just as much: treated aluminium or polycarbonate age better outdoors, and the seals should be checked every year.
Waterproof LED floodlights: reading the ingress protection rating
Two digits follow IP: the first concerns solids, the second water. An IP65 resists dust and water jets; below that, the fixture is reserved for a sheltered location. Waterproof outdoor fixtures can also be recognised by their cable gland and by their seal correctly seated in the groove.
Pool, seaside: what wears out an outdoor floodlight
Salt and chlorine attack screws, seals and paint. Treated aluminium and stainless steel hold up better than ordinary plastic, and rinsing with clean water at the end of the season extends service life. For a pool, look at the floodlights dedicated to pools and, on a concrete pool, the concrete recessed models.
White, RGB or colour temperature: which light for outdoors?
Colour temperature sets the mood: a warm white makes a facade welcoming, a cooler white highlights stone and secures a path. RGB floodlights, for their part, change colour to animate a terrace or a garden, without lighting as precisely as a fixed white.
RGB outdoor floodlights: when colour makes sense
A terrace, a garden, a reception: colour creates an atmosphere, not security. For moving around at night, a fixed white remains more readable and tires the eye less. RGB LED floodlights are often controlled remotely, which avoids reprogramming the fixture with every change of season.
Warm white or cool white on a stone facade?
A warm white, around 2700 to 3000 K, warms the stone and matches the interior lighting. A cooler white, around 4000 to 5000 K, gives a crisp rendering that suits a garage or a work area. On the same facade, keep to a single family of white. White outdoor LED floodlights are chosen to match the render or the stone of the wall.
Wall-mounted, on a stand or free-standing outdoor floodlight: which type of mounting?
Wall mounting frees up the ground and places the light high up, provided it is fixed securely into a suitable support. A floodlight on a stand can be moved and adjusted, useful for a building site, an event or a corner of the garden. Rechargeable models avoid any wiring and can be placed wherever you like.
Wall mounting: the points to check before drilling
Solid support (concrete, stone, solid brick), suitable wall plugs, a height consistent with the intended orientation. A hollow wall requires a reinforcement or a wider mounting plate. Also check that the cable arrives at the right height so it does not pull on the cable gland. Most fixtures are mounted on an adjustable plate.
LED floodlight on a stand for a garden or a building site
On a stand, the fixture can be moved and aimed at will: useful for a building site, a reception, a poorly served corner of the garden. Movable floodlights on a stand remain stable in the wind if properly weighted. With no socket nearby, rechargeable floodlights with no wiring take over.
How to install and maintain an outdoor LED floodlight?
Installation requires a protected power supply, a tightened cable gland and an orientation towards the ground or the surface to be lit, never towards the eyes or the public highway. Maintenance is limited to dusting the glass, checking the fixing screws and the condition of the seal after winter.
Wiring, sealing and beam orientation
Switch off the power first, connect to a protected circuit, tighten the cable gland and close the seal without pinching it. Aim at the ground or the surface, never at a neighbour's window. For long-term operation, see the outdoor floodlights designed to stay on for several hours.
Cleaning the glass and checking the fixings
A soft cloth and soapy water are enough: abrasive products dull tempered glass. Check the screws and the seal after winter, tighten anything that has moved, replace a cracked seal. Garage floodlights require the same maintenance, with dusting of the cooling fins.
What is the best brand of outdoor LED floodlight?
There is no best brand in absolute terms: the quality of an outdoor LED floodlight can be read in the consistency between power, luminous flux and ingress protection rating, in the material of the housing and in the availability of spare parts. A well-known brand is reassuring, but these criteria weigh more when choosing.
No product is available in this collection: it is therefore not possible to specify here the material or thickness of a housing, the type of glass, the IP rating, the cable gland or compatibility with a sensor. The selection criteria remain to be checked on each product page when a model is offered. Before confirming, check the mounting, the IP rating and the possible orientation: that is where service life is decided. Secure payment, tracked delivery, returns and the Designix customer service accompany the order, and the entire lighting catalogue lets you compare families with each other.
To go further, browse the selection of LED floodlights and note the three values that concern you: power, flux and IP.
Frequently asked questions
High power LED floodlight 1000 W: is it necessary?
A power rating of that order concerns very large spaces, such as a stadium, a square or an industrial zone, with a dedicated power supply. For a house, a courtyard or a garage, a far more moderate model is enough and installs on a standard domestic circuit. Luminous flux matters more than the power figure.
Can a high power outdoor LED fixture be installed near a pool?
Yes, provided you choose a fixture designed for humidity and water splashes, with a high ingress protection rating and a salt-resistant housing. The orientation must avoid any direct reflection on the water and any glare for swimmers. The mounting and the sealing of the connection should be checked regularly.
Does a high power outdoor LED floodlight consume a lot of electricity?
Consumption depends on the power and above all on how long it is switched on. A motion sensor or a dusk-to-dawn photocell greatly reduces operating time by switching on only when useful. At equal power, LED technology converts energy into light more efficiently than older sources.
Is a motion sensor needed on a high power outdoor LED lamp?
The sensor is useful on an entrance, a garage or a rarely used passage: the light comes on at the right moment and switches off by itself. On a facade you want lit all evening, switching by wall switch or dusk-to-dawn photocell is more suitable. Both modes can coexist on the same installation.
High power outdoor LED floodlight: how to aim it without causing glare?
Direct the beam at the surface to be lit, never at the eyes, a neighbour's window or the public highway. A slightly downward angle towards the ground gives more useful and less aggressive light. Adjust the fixture before finally tightening the screws, then check the result at night from the street.





