Concrete LED pool lights
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
No products in this selection.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?
An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Plan the niche and the cable conduit before pouring the concrete shell: a concrete pool light is sealed into the wall and can later be replaced from the front, without breaking the masonry. This page brings together the criteria decided before the work begins and those compared at the moment of choice.
Which concrete pool light should you choose for a swimming pool?
The choice comes down first to the wall: a sealed unit requires a niche embedded in the concrete shell, with front access for replacement. You then compare the size of the body, the protection rating stated on the specification, the material, and then the type of light. To see the submerged units, browse LED pool lights.
On budget, stay relative: entry level models prioritise function, mid range units refine the finish and ease of removal, and some pieces come close to an exceptional object through their material or controls. None of these families removes the need to check compatibility with the niche already in place.
Concrete pool lights for an in-ground pool
On a masonry pool, the niche is cast or sealed into the wall during the structural work, and the supply conduit reaches the plant room. The unit is fixed into this niche and removed from the front, which avoids breaking the concrete on every intervention. Coordination between the bricklayer, electrician and pool builder must be settled before pouring.
Concrete pool lights for an above-ground pool
An above-ground pool with a structural frame offers no masonry wall in which to recess a concrete light. The solution lies in a submerged light designed for this type of pool, or in lighting the surround, terrace and garden around the pool. In the second case, take a look at lighting the garden and the units in the the floodlight family.
| Type of pool | Installation method | To plan before the work | Point of vigilance |
|---|---|---|---|
| In-ground masonry pool | Unit sealed into a niche embedded in the concrete shell | Niche, conduit and supply cable | Coordination between bricklayer, electrician and pool builder |
| Above-ground pool with a frame | No masonry wall to recess a concrete light | Submerged light suited to the structure, or perimeter lighting | Check compatibility before any purchase |
| Masonry pool to renovate | Replace the unit from the front, in the existing niche | Check dimensions and fixing of the niche in place | Check the seal and cable gland on removal |
| Pool with a liner or membrane | Unit sealed under the waterproof covering | Niche and cable routing before laying the assembly | Watertightness around the finishing plate |
What is the average lifespan of a pool light?
The LED generally outlives the rest of the unit, and it is almost always watertightness that decides the service life. The seal, the cable gland and the cable entry age before the light module, then comes the driver. Balanced water and careful winterising weigh more heavily than a specification figure.
What fails before the LED: seal, cable gland, driver
The sealing gasket dries out, marks or loses its elasticity over the seasons. The cable gland and cable entry follow, especially if the cable was pulled carelessly during installation. The driver suffers from the ambient humidity of the plant room and voltage variations. These three points account for most interventions, well before the LED itself.
Extending the life of a submerged light: maintenance and winterising
Check the seal visually each season and replace it as soon as it hardens. Clean the glass with clear water, without aggressive products. When winterising, protect the unit from frost as recommended by the manufacturer and keep water treatment within the ranges recommended for the pool. The catalogue includes waterproof models whose specification details the material and fixing.
What should you do if your concrete pool light leaks?
Switch off the power at the consumer unit and lower the water level below the unit before any intervention. A submerged unit is never dismantled while live. The leak most often comes from the seal, the cable gland or the cable entry, and replacing these parts should be entrusted to a professional.
Locating the source of the leak
Examine the plate and the seal first: a seal pinched or crushed during installation lets water in slowly. Then check the cable gland, then the cable entry, following the conduit back to the plant room. A trace of moisture on the conduit side points to the cable entry rather than the glass.
Repairing or replacing a submerged light
If only the seal or the cable gland is at fault, replacing them is often enough to get going again. If the body, the glass or the niche are affected, it is better to replace the whole unit. On a masonry pool, removal is done from the front in the existing niche. The electrical connection remains the responsibility of an electrician.
How do you install a light sealed into a concrete wall?
Installation takes place before the pool is finished: the niche and the cable conduit are sealed into the wall, then the unit is fixed into it and removed from the front. The connection is made out of water, in the plant room. Allow for an electrician's intervention for the connection and safety measures.
Planning the niche and conduit before the pool work
Mark the position of the niche on the plan, taking into account the water height and the swimming axis. The conduit and the cable must reach the plant room with a slope that prevents stagnation. These provisions, made at the right time, are what will make future replacement simple.
Connection and safety measures
The connection is made out of water, on a protected circuit, with a conduit suited to buried routing. The watertightness check is done before filling with water, never after. For the pool surround and the surround, also compare LED outdoor lighting and the units in garden floodlights.
White or RGB: which light colour should you choose for the pool?
White genuinely lights the pool: it makes the water readable and remains the default choice for a swimming pool. Colour versions tint the water and change the evening mood, without harming the lighting. Some units combine both and switch from one mode to the other.
White, to see the bottom and swim peacefully
A fixed white switches on without controls and gives a constant tone from one evening to the next. It is the logical choice when the pool is used for swimming, or when the surround must stay readable to watch bathers. Find these units in white LED floodlights.
Colour light, to change the mood in the evening
Colour units are controlled by a dedicated command and allow scenes reserved for entertaining or evenings. They light the bottom less clearly than white, which makes them more suited to atmosphere. See the RGB versions for this type of effect.
| Type of light | Effect in the pool | Typical use | What can be adjusted |
|---|---|---|---|
| Fixed white | Lights the bottom and walls, constant tone | Evening bathing, safety, swimming | Nothing to control, simple switching |
| White with variable temperatures | Changes the mood without tinting the water | Pool and surround, warm or crisp atmosphere | Temperature chosen at purchase |
| Colour (RGB) | Tints the water, effects and coloured scenes | Entertaining, evening atmosphere | Dedicated command or remote control |
| White and colour combined | Readable white for swimming, colour afterwards | Versatile family use | Switch between the two modes |
How do you match the pool light with the house and the terrace?
Stay consistent by keeping the same white family outside and inside: a warm white for the living room and the terrace, a more neutral white where you cook or get ready. The pool can take a cooler or coloured light, reserved for the evening. The project is therefore thought through from the garden towards the interior, not the other way round.
Light colour for living room, terrace and surround
Start with the terrace and the surround: a warm white there extends the living room light and avoids a break between the two spaces. Add low, discreet garden lighting so as not to compete with the pool. The units in solar solutions and freestanding floodlights can be installed without trenching and remain mobile.
Applying the same logic indoors
The rule holds for the house: modern kitchen decor benefits from a neutral white, which does not distort the colour of the worktops, while a WC light is content with a simple white without glare. A LED ceiling light in the living room, set to the same warm white as the terrace, is enough to keep things consistent. Compare the families in all our light fittings and, for a separate room, bedroom floodlights.
Which mistakes should you avoid with a concrete pool light?
The most costly mistakes are decided before purchase: a niche not planned in the concrete shell, a conduit forgotten in the slab, a unit chosen without checking its fixing or its protection rating. These points are hard to put right once the pool is filled.
Choosing the unit without planning the niche or access
A sealed unit without a suitable niche cannot be installed, and a niche without front access makes every replacement painful. Check the body dimensions and the fixing method before ordering. The opposite mistake is to freeze the position without thinking about the swimming axis or the water height.
Neglecting watertightness and the protection rating
A seal pinched during installation, a poorly tightened cable gland or a cable pulled too short are enough to let water in. The protection rating stated on the specification is read before purchase, not after the first leak. For the surrounds, motion sensor models and outdoor lighting with a sensor cover the surround without staying on permanently.
For the rest, the shop provides secure payment, tracked delivery, returns and a Designix customer service team that answers compatibility questions before ordering. Browse our range of LED floodlights then garden floodlights to complete the pool lighting, and find the whole catalogue in the Designix lighting catalogue.
Frequently asked questions
Do you need to empty the pool to replace a sealed light?
Generally no. On a masonry pool fitted with a niche, the light is removed from the front and replaced without breaking the concrete. Simply lower the water level below the unit and switch off the power at the consumer unit. A professional confirms the procedure according to the pool configuration.
Concrete pool lights for an above-ground pool: what solution?
A light sealed in concrete does not apply to an above-ground pool with a frame: there is no masonry wall to recess it into. Turn instead to a submerged light suited to this type of pool, or to lighting the surround and the garden around the pool.
How do you get a consistent light colour between the living room and the pool?
Choose the white family of the house first: a warm white for the living room and the terrace gives a consistent base. The pool can stay white while swimming and switch to colour in the evening, without breaking this consistency between inside and outside.
How do you maintain a concrete pool light?
Check the seal and the cable gland each season, clean the glass with clear water without aggressive products, and protect the unit from frost when winterising. Water treatment must stay within the ranges recommended by the pool manufacturer so as not to attack the parts.
Which criteria should you confirm before ordering?
Check the protection rating stated on the specification, the compatibility of the fixing with the niche in place, the material of the body, and access to the seal and the cable gland for maintenance. Have the cable cross-section and circuit protection approved by the electrician before filling with water.
