Brass wall sconces for bathroom
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?
An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Place a wall light on each side of the mirror, rated IP44, with a warm white bulb between 2700 and 3500 K: that is what lights the face without casting shadows. Gold brass warms grey tiles, polished concrete or light wood, and the glass you choose draws the light on the wall.
What is the ideal lighting for a bathroom?
The ideal is to layer the sources: a general ceiling light, then a brass bathroom wall light on each side of the mirror to light the face without casting shadows. In a wet area, choose a light rated IP44, with a warm white bulb, between 2700 and 3500 K, for a clear result on the skin.
What a brass bathroom wall light changes near the mirror
Set at mirror height, it lights the face from the front, where a ceiling light casts the shadow of the chin on the basin. Gold brass warms the tiles and the glass spreads the light on the wall rather than into the eyes. On clean models that are easy to match, browse our full lighting range. Almost the whole selection is IP44, which covers water splashes in a bathroom. A few references go one step further, and you will find them among the higher protection rating references. As for the bulb, sockets range from E27 to G4, including G9 and E14.
Warm white or cool white: which light colour to choose?
Warm white, between 2700 and 3500 K, dominates by far: it flatters skin tones and makes brass sing. Neutral white, from 3500 to 4500 K, gives a clearer result, useful above a vanity top where you shave or put on make-up. Cool white, from 4500 to 6500 K, stays reserved for utility uses, because it turns gold blue and hardens features. For a subtle echo in a living room, also look at the lights designed for wet rooms.
What is the best light for a bathroom?
There is no single best light: a wall light lights the face near the mirror, a ceiling light lights the whole room. In this selection, the brass lights are protected against water splashes with IP44, a few models with IP45, and give a warm, decorative light.
Wall light or ceiling light: which to choose for each room?
Above the mirror, the wall light wins: it places the light at eye level and frees the ceiling. In a room without a window, a ceiling light completes the general lighting. On the walls, the most sought-after models play the vintage inspiration card, while clean lines match a modern interior better.
A brass light for the terrace and the entrance, with the same finish
The same family of finishes exists in an outdoor version, under cover or near a front door, with the same protection against splashes. You keep a consistent look between the bathroom and the rest of the house. See the brass for terrace and entrance, then the outdoor models for terrace if the wall is more exposed.
Where to install a brass bathroom wall light?
On either side of the mirror to light the face, above a vanity unit for a bar of several lights, at the head of the bath for a vertical model that dresses a narrow wall. In a toilet, a compact light placed near the basin is enough, provided it is protected against splashes.
Toilet light: which wall light to choose?
In a small room, a reduced format avoids crushing the wall: the Ivlino with its opal sphere on a square base takes up about 16 cm per side and sits next to the basin. The opal glass softens the light and the square base fixes flat against the partition. Complete your reading with the lights designed for toilets.
Living room wall lights: reuse the same brass elsewhere in the house
Brass does not stop at the bathroom door. The same gold works above a bookcase, on each side of a bed or along a hallway, with E27 or G9 sockets depending on the space. To extend the series, see the living room wall lights, then the models for the bedroom. In a passage, prefer a low-consumption version, such as those in the modern for hallway selection.
| Location | Format | Socket | Protection | Example |
|---|---|---|---|---|
| Around the mirror | Compact, 12 to 20 cm | G9, E14 or LED | IP44 | Dryden Laiton, Marvele Laiton |
| Above the vanity unit | Horizontal bar 40 to 86 cm | E27 | IP44 | Quadrilum, Azores Bois |
| Head of the bath | Vertical tube 50 to 66 cm | LED or E27 | IP44 | Facet H 65.9 cm, Déodat |
| Toilet wall | Reduced format | E14 or G9 | IP44 | Azores, Ivlino |
| Terrace or entrance | Protected model | E27 or LED | IP44 | Calselilo, Eliot Laiton |
How to choose a brass bathroom wall light?
You start from the socket: E27 for a standard bulb, G9, E14 or G4 for compact formats, integrated LED when you do not want to change bulbs. Then comes the glass material, opal, fluted, ribbed or clear, then the dimensions of the model and the gold or black and brass finish.
Brass and glass wall lights: which glass for which light?
Opal glass spreads a soft light, without glare, ideal near the mirror. Fluted or ribbed glass draws lines on the wall; that is what the vertical tube Dantos and its fluted glass does, in an integrated LED version with no bulb to replace. Compare the other variations in the brass and glass wall lights. Clear glass shows the bulb and plays on the shine of the metal, speckled glass adds a workshop texture.
Do you need a dimmable light in a bathroom?
A minority of models accept a dimmer: handy in the morning when you want a bright light, and in the evening for a low mood. The Plaat C, a model with a ball and tube shape 20 cm in diameter, combines an E27 socket and possible dimming. If you prefer to forget the bulb, go for an LED version with no bulb to change.
Which size of brass bathroom wall light for which wall?
A compact model of 12 to 20 cm suits either side of a mirror. A bar of several lights, 40 to 86 cm long, dresses a large wall above a vanity unit. A vertical tube 50 to 66 cm high balances a narrow wall or a head of bath and takes up the height without cluttering.
Which wall light for a small bathroom wall?
A vertical tube uses the height instead of the width: the Facet H 65.9 cm measures only 12.7 cm wide, the Sorselano 11.5 cm. These proportions let a 60 cm wall breathe. For a very graphic result, look at the boldly designed lights.
Bar of several lights or simple light above the mirror?
A bar covers a wide mirror and replaces several light points: the four-light bar Quadrilum measures 85.8 cm and sits above a good-length vanity unit. On a narrow mirror, two simple lights on either side do better than a bar that is too long, wider than the mirror it hangs over.
How to match the brass light with the rest of the bathroom?
Gold brass matches almost everything: it warms polished concrete, grey tiles or light wood. Keep the same finish between the light and the taps in the room. Opal glass softens, fluted or speckled glass adds relief without glare.
Gold brass, black or chrome: with which taps?
With brass or gold taps, stay with a plain gold for a calm room, or choose a gold-only model if the wall is very colourful. With black taps, the contrast works well: see the black and brass variations, which draw a graphic line on a light wall.
Match the light with a dining room or living room chandelier
Gold acts as a common thread from one room to another: the same metal as a chandelier above a table, a wall light on a wall or a pendant in a kitchen. For the living room, browse the whole lighting universe. If your open kitchen needs wall lighting, the lights for a modern kitchen decor extend the same finish.
| Glass or finish | Effect | Style | Example |
|---|---|---|---|
| Opal glass | Soft light, no glare | Contemporary | Eliot Laiton, Sorselano |
| Fluted or ribbed glass | Relief and pattern on the wall | Contemporary | Dantos, Azores Bois |
| Clear glass | Shine of brass, visible bulb | Vintage | Dryden Laiton, Azores |
| Speckled glass | Workshop texture | Vintage | Déodat |
| Plain gold brass | Warms grey, concrete and light wood | All styles | Ivlino, Francoise |
| Black and brass | Graphic contrast | Contemporary | Calselilo, Dantos |
How to install and maintain a brass light?
The light fixes to the wall on a backplate or a square base depending on the model, and the IP44 rating indicates that it resists water splashes in a bathroom. For maintenance, a soft cloth is enough: avoid abrasive products and scouring pads, which scratch the gold finish and dull the glass.
Wiring an IP44 light: what to check before drilling
First locate the cable feed and the height of the mirror, then position the backplate dry before drilling. In splash zones, the fixture must stay away from the bath or shower, and the connection is best entrusted to an electrician if that is not your trade. The manufacturer warranty covers two years on the vast majority of models, three years on a few.
Cleaning brass and glass without scratching them
A damp microfibre cloth then immediate drying is enough to remove water marks and the film of soap. Brass patinates over time: this is a normal evolution of the finish. On glass, a mild cleaner limits limescale marks. The Déodat with speckled glass needs the same gesture.
Frequently asked questions
Which light to choose for a toilet?
A compact wall light is enough, placed above the pan or next to the basin, provided it is protected against water splashes. A brass model in a reduced format, G9 or E14 socket, lights a small wall without cluttering it.
Can you install a brass wall light in a damp bathroom?
Yes. The models in this collection show an IP44 rating for almost all of them, which covers water splashes in a bathroom, and a few references go up to IP45. Brass patinates over time but does not fear ambient humidity.
Should you choose an E27 socket, a G9 socket or an LED light?
The socket determines the bulb and the shape of the beam: E27 accepts standard bulbs with diffuse light, G9 and E14 suit compact lights, G4 miniature models. An integrated LED light is installed with no bulb to change and generally gives a warm white light.
Which light colour to choose for a bathroom?
Warm white, between 2700 and 3500 K, dominates in this selection: it flatters skin tones and warms the brass. Neutral white, from 3500 to 4500 K, gives a clearer result above the vanity top. Cool white stays reserved for utility uses.
How to maintain a brass wall light?
A soft cloth is enough to remove water marks and the film of soap. Avoid abrasive products and scouring pads, which scratch the gold finish. On glass, a mild cleaner followed by quick drying limits limescale marks.
Order from Designix
Secure payment, tracked delivery, possible returns and Designix customer service to help you choose the format: a compact light around the mirror, a bar above the vanity unit, a vertical tube at the head of the bath. The models mentioned in this guide, including the Quadrilum and the Dantos, are available in the collection, with their current price shown in the grid.
