Black wooden bedside table lamps

A black or dark fabric shade concentrates and softens the beam: light comes out mainly upwards and downwards, without glare. Most models take an E27 bulb, a few compact formats take E14, with a bulb to be chosen in warm white 2700 to 3500 K for the evening.

What light does a black wooden table lamp give on a bedside table?

The result comes down to two parts: a dark base that disappears into the half-light and a shade that closes the beam. The upshot is a soft pool of light on the wall and on the book, with no glare for the person lying next to it.

E27 or E14: which bulb should you plan for?

The E27 socket equips the vast majority of models, from the Boisera with its turned base to the large 65 cm bases. The E14 socket is reserved for compact formats, such as the Ninja or the Nivaldo: the bulb is smaller and the choice in shops is more limited. The socket is stated on each product page, so check it before buying the bulb.

Warm or cool light depending on use

In a bedroom, a warm white between 2700 and 3500 K gives an amber light, close to the old incandescent bulbs. A cool white around 4500 to 6500 K lights more directly and suits reading or working better. The Caldanaro skips the bulb choice: its integrated LED offers both temperatures and a dimmer. Also see the LED versions for the bedroom if you no longer want to change bulbs.

Where should you place a black wooden bedside lamp in the bedroom or living room?

On a bedside table, aim for a shade that reaches roughly shoulder height when seated: a model 33 to 45 cm high works well. A large 65 cm base takes its place on a pedestal table or a sideboard, with around forty centimetres of diameter to allow for.

On a narrow bedside table

A 30 to 40 cm wide bedside table supports a 9 cm square base like the one on the Adalie Noire, or a 14 cm cylinder like the Kioto. Leave about ten centimetres between the shade and the wall so the light can breathe. On a really narrow surface, design bedroom lamps in a small format remain the safest choice.

In the living room, on a pedestal table or sideboard

On a wide piece of furniture, models 65 cm high with a 40 cm shade diameter (Nertorella, Oritorica, Sortorella) make a presence without cluttering the walkway. For a reading corner or the end of a sofa, a black model for the living room complements the ceiling light. All models are rated IP20: dry rooms only, never in a bathroom or on a terrace.

How do you choose among black wooden bedside table lamps?

The choice comes down to three details: the shape of the base, the shade material and the format. A turned base with a fabric shade gives a sober result; wooden slats, a woven shade or a metal cage make the lamp more graphic. To compare the families, browse the black wooden table lamps.

Turned wood or raw wood base: what is the difference?

Turned wood draws a round, regular stem that goes with almost anything: this is the case with the Boisera and most of the large bases in the collection. Wood left more raw keeps a rustic feel; the Adalie Noire, in metal, makes do with a base of just 9 cm. The wooden slats of the Kioto play a third card, more graphic, at 33 cm high.

Fabric, woven bamboo or metal shade

Fabric, velvet included, absorbs the light and makes it soft: ideal near the bed. Bamboo and woven fibres filter it, drawing shadows on the wall, as on the woven shade of the Oritorica. Black metal bounces the beam downwards and lights more directly, like the Bernita Noire and its cage.

What size of bedside lamp should you choose depending on the room and the furniture?

A small format 15 to 33 cm high fits on a shelf or a narrow bedside table; a model 45 to 65 cm becomes a visible piece on a sideboard. The height is measured including base and shade, and the shade diameter ranges from 16 to 40 cm depending on the model.

Simple rule: the lamp takes up between a third and half the width of the furniture it stands on. Too small, it gets lost; too wide, the shade overhangs and the light falls beside the book. Once the height is settled, ordering is done with secure payment, tracked delivery and possible returns through Designix customer service.

How do you match a black wooden bedside lamp with your decor?

Black wood accepts two directions: a white or gold shade to lighten the lamp and make it disappear in a bright interior, or a bottle-green, blue, orange or grey shade to make it a colourful object on the furniture.

A white shade to lighten the black

On a light wall, a white shade and a black base create a clean contrast without weighing things down, as on the Ondtorella and its brass detail. To push this further, the gold and black finishes warm up the whole without colouring it strongly.

Playing black wood with gold brass or bottle green

Brass and bottle green are the two most frequent pairings on black turned bases, from the Livtoressa to the Sortorella. A linen shade keeps the same softness with a more matte material: see the linen shades. For a very understated interior, modern black lamps hold the same line without a decorative effect.

How do you connect several lamps to a single power supply?

The lamps are wired in parallel on the same supply, with terminals or a connector block, checking that the combined wattage of the bulbs stays within the circuit limit. Without any work, a switched power strip or an extension lead with a switch is enough for two bedside lamps.

Two lamps plugged into the same socket

A power strip placed behind the bedside table, with an accessible switch, avoids running two cables to the wall socket. No model in the collection requires a transformer: the sockets are standard and the bulb screws in directly.

Switch and dimmer: what changes when connecting

A switch on the cord or on the base does not change the wiring. The dimmer, found on the Caldanaro, is controlled from the lamp itself: nothing extra to wire. For a desk, black desk lamps follow exactly the same rules.

How do you install and care for a black wooden lamp without damaging it?

A soft cloth is enough on the wooden base, without water or abrasive products that would mark the black finish. Respect the wattage stated by the manufacturer, let the bulb cool before changing it, and the IP20 rating reserves the lamp for dry rooms in the home.

The wood arrives already finished, in turned black or raw: no stripping or varnish to remove before setting it up. On a fabric or fibre shade, dry dusting is enough, without wetting the material.

What are the original and trendy black wooden bedside lamps?

An original lamp is recognised by a detail of shape or material, not by a label: slatted base, amber globe on a black base, metal cage or woven fibre shade. Italian design, for its part, is read in the sobriety of the lines and the rightness of the proportions.

Italian design: what exactly is it?

Simple lines, few materials, one detail that carries the whole design. The amber globe of the Adalie Noire and the woven fibre shade of the Veltoreta go in this direction. For a more assertive interior, look at design living room lamps. The work of design wood opens other paths, more sculptural.

A set of 2 to equip both sides of the bed

Two identical models on either side of the bed give a symmetrical bedroom, and the large 65 cm turned bases suit this well. If you prefer to vary the materials, black metal bedside lamps play a different register. For living room furniture, a wooden lamp for the living room completes the pair. Designix customer service helps with choosing the two pieces, with tracked delivery and returns included.

Frequently asked questions about black wooden bedside lamps