Gold-colored brass light fixtures

Start by choosing your family: a pendant above a table, a ceiling light for diffused illumination, a wall light to dress a wall. These antique brass lighting fixtures combine brass with glass, metal or wood, with LED, E27, G9, GU10 or E14 sockets depending on the model, for the bedroom, living room, hallway and kitchen.

What is an antique brass lighting fixture?

An antique brass lighting fixture is a light whose structure or finish shows the golden-yellow tone of brass, often combined with glass, metal or wood. This collection mainly brings together pendants, ceiling lights and wall lights, for the bedroom, living room, hallway, kitchen and dining room.

The shapes and materials associated with antique brass

The most common shapes are the ball, the tube and, more occasionally, the oval and the round. As for materials, brass dominates, often accompanied by metal, clear or opal glass, steel and wood. This combination gives a light that keeps a clean line while bringing a warm tone, without overloading the room.

Which rooms are these models designed for?

The bedroom and living room account for most uses, followed by the hallway, kitchen and dining room. A linear pendant in ribbed glass such as the Pirano pendant suits a large worktop or a long table, while a minimalist ball such as the Halvora pendant fits above a dining nook or a bedside. To widen the comparison, browse our full selection of lighting.

What colour is brass?

Brass is an alloy of copper and zinc: its natural tone ranges from pale yellow to deep gold, and it patinates slightly over time. The finish changes the result: brushed brass looks matte and soft, polished brass reflects more light, lacquered brass keeps its original tone.

Raw, brushed, polished or lacquered brass: what changes

Raw brass takes on an uneven patina, with darker shades in the recesses. Brushed brass keeps a matte, even surface, more discreet under warm light. Polished brass acts like a mirror and doubles the ambient light. Lacquered brass freezes the original pale tone, which suits you if you want the same gold in ten years. For a similar but more patinated look, see the copper models for a more patinated feel.

Does brass patinate over time?

Yes, slowly: the surface darkens in places and gains depth, especially in a damp room or near a window. A soft cloth is enough to even out the finish. This change is normal and does not indicate a manufacturing defect; it is part of the character of the material.

Brushed brass light or bright gold finish: which to choose?

Brushed brass diffuses a soft, matte light; it pairs well with contemporary, minimalist or wood interiors. Bright gold brass reflects light and creates a focal point in the room; it suits living rooms and dining rooms where you want a dressier look.

Brushed brass: how does it look in a living room and a bedroom?

On a light wall, brushed brass goes unnoticed by day and does not throw a glare in the evening. A wall light such as Luciana, with its two U-shaped arms and opal glass, lights a reading corner without glare. In a bedroom, this restraint works well, especially combined with beige tones for a soft room.

Bright gold finish: for which rooms?

Brightness plays its role as a focal point: above a table, it catches the light of candles and bulbs and doubles the warm tone of the room. A three-light pendant such as Rosnorano plays this role in an open kitchen. Both finishes are cleaned the same way, with a soft cloth. To push the look further, see the luxury lights with a gold finish.

Which room should an antique brass lighting fixture go in?

Antique brass works in dry rooms: bedroom, living room, hallway, kitchen, dining room, corridor and study. For a WC or a bathroom, check the IP rating on the product page, as most models in the collection are IP20, intended for dry air.

Lights for a WC: which IP rating should you choose?

A WC is a dry room: IP20 is suitable in most cases. If the room is damp or close to a shower, look for an IP44 or IP45 model, more resistant to splashes. A compact format, ceiling light or wall light, avoids getting in the way. Find short formats in the lights for WCs and, for a wet room, the models suited to the bathroom.

Which gold light for a hallway or corridor?

In a hallway, you want a light that does not require switching on several points: an adjustable steel and brass ceiling light such as Bartolomeo, in GU10, does the job above a piece of furniture or a mirror. In a corridor, an oval wood and metal wall light such as Cassiope dresses the wall without cluttering the passage. For an open kitchen, see the lights for a modern kitchen.

Brass pendant, ceiling light or wall light: which to choose?

The pendant concentrates light above a table, an island or a reading corner, and its cable is adjustable. The ceiling light illuminates widely without hanging into the room, useful in a hallway or corridor. The wall light dresses a wall, frames a bed or lights a circulation area, in G9 or LED depending on the model.

Which socket for a brass light: E27, G9, GU10 or LED?

E27 and G9 sockets dominate the collection, followed by GU10 and E14, with some integrated LED modules too. E27 takes large bulbs and lampshades, G9 suits small pin modules, GU10 suits adjustable ceiling lights, E14 suits slim tubes. The socket is stated on each product page; check it before choosing your bulb. As for colour temperature, a warm white around 2700 to 3500 K is restful for the bedroom and dining room, a cooler white around 4500 to 6500 K gives clear reading in the kitchen and study.

Glass, metal or wood light with antique brass

Clear glass spreads the light and visually lengthens a room; opal glass veils it and prevents direct glare above a bed. Black metal or steel contrasts with the gold and structures a pendant. Wood warms the whole, especially on ball shapes. A five-shade fabric pendant such as Calveseta combines steel, brass and fabric to soften the light over a large table. Unsure about the material? Compare the smoked glass variants.

At what height and distance should an antique brass pendant be set?

These pendants have an adjustable cable, with a maximum height ranging from 105 cm to 200 cm depending on the model: you choose the height when installing. Adjust the cable before screwing the mount to the ceiling, then check that the bottom of the light does not get in the way or block the view of guests.

Pendant with a maximum height of 160 cm: how do you adjust it?

Unroll the cable, cut it to the desired length if the model allows, then fix the mount. In general, the bottom of the light sits around 75 to 85 cm above the tabletop, so as not to hide faces and to stay out of the seated line of sight. Do this with two people: one holds the assembly, the other checks the height from the chair. Models such as Quarnaro or Wes are adjusted this way.

Three-light pendant above a table or an island

Align the light points with the axis of the table or island, not the axis of the room, and keep the same distance between each source for an even result. A three-light pendant such as Fenrir, in E27, lights a rectangular table without overloading it. Over a kitchen island, raise the whole thing a few centimetres to clear the view. More ideas in the pendants to hang above a table.

Lighting shop or online purchase: what to check before ordering?

Before buying, whether in a lighting shop or online, check four pieces of information on the product page: dimensions, socket, IP rating and material. Add dimmer compatibility and the warranty, which is two years on this selection. These criteria avoid a return for a light that is too big or unsuited to the room.

Lighting clearance Lyon: the information to check on the product page

A search for lighting clearance Lyon often returns limited stock, whose references change quickly. Rather than chasing availability, check what will not change: the diameter or length of the light, cable height, socket, IP and material. These details tell you whether the piece will suit, whatever the sales channel. To get a sense of the styles, see the original decorative lights and the blue lights, two useful references for comparing tones.

Ordering online: tracked delivery, returns and secure payment

At Designix, payment is secure, delivery is tracked and returns are provided for, with customer service to answer questions about dimensions or sockets. Before confirming, measure the floor space and note the dimensions of the light: this is the check that avoids the most disappointment. A slim model such as the Alavesora pendant, in ribbed glass and brass, does not go in the same place as a large multi-shade assembly. To complete existing lighting, also see the floor lamps to complete the lighting.

How do you care for an antique brass lighting fixture?

An antique brass light is dusted with a soft, dry cloth, without abrasive products that would remove the finish. Clean the glass separately, with warm water and no harsh detergent, and dust fabric shades with a soft brush. For a bulb, respect the maximum wattage stated on the light.

Cleaning brass without removing the gold finish

Wipe with a dry microfibre cloth once a month, more often in a kitchen where cooking vapours settle. For a stubborn mark, a slightly damp cloth is enough, then dry immediately. Polishing pastes and abrasive sponges attack the lacquer and leave lasting marks on brushed brass. A pendant with a fabric shade such as Gherardo is dusted part by part, structure then fabric.

Caring for glass and fabric shades

Remove the glass diffuser when possible, wash it in warm water with a little mild dish soap, then let it air dry before refitting. On a fabric shade, use a soft brush or the vacuum cleaner on minimum power, never water. If you plan a wall dimmer, first check that the model and the bulb support it, since only some of the lights in the collection accept dimming.

Frequently asked questions