Wooden pendant lights

To choose wooden pendant lights, start with the room to light: a large dome or a three-point model above the table, a wood and metal pendant in the living room, a compact and washable format in the kitchen, a narrow model in the hallway, an IP54 outside. The socket and colour temperature are decided afterwards.

Which wooden pendant light to choose for which room?

For a dining room, a multi-point model or a large dome lights the table; in the living room, a wood and metal pendant structures the space; in the kitchen, a compact and washable model is essential; in the bedroom, a light or white wood softens; in the hallway, a narrow format is enough. For a terrace, check the IP54 rating.

The vast majority of models in this selection target the dining room, living room and kitchen. The bedroom is well covered, the hallway more rarely, the terrace remains the exception. Browse the pendant lights to find each use.

In which room to install a wooden pendant light?

Above a dining table, a large dome or a three-point model covers the entire surface. Wooden pendant lights for living room rather set the mood, with round shapes or wood frames. For a wooden pendant light for kitchen, look for a tube or a compact dome, easier to wipe. For the bedroom, a light, white or beige wood keeps the light soft, and a narrow format is enough in a hallway.

What format for a dining room or living room?

For a table of six, a dome 34 cm in diameter works well above the surface. On a large table, a three-point mounted on a rail, with its 60 cm support, distributes the light instead of concentrating it. In the living room, a 30 cm tube or a model 25 cm in diameter is enough: the pendant marks a point, it does not light the whole room.

Which socket and bulb for a wooden pendant light?

The majority of wooden pendant lights in this selection use an E27 socket, with max powers of 15 W, 40 W or 60 W depending on the model. Others include an LED, a G9, a GU10 or an E14. Choose warm white for the living room and neutral white for working.

E27 or integrated LED: which to choose?

The E27 socket leaves the choice of bulb and is replaced in a minute: this is the case of the Ferrona pendant light, rated for 60 W maximum. The integrated LED imposes the source and the format, often a slim profile. It is chosen when the line of the luminaire matters more than the possibility of changing the bulb.

What colour temperature for a wooden pendant light?

A warm white, around 2700 to 3500 K, suits meals and rest: the wood appears warmer. A neutral white, around 3500 to 4500 K, makes worktops and reading clearer. Many models accept both since they are socket-based. Some are dimmable, to be checked among the dimmable pendant lights.

How to match a wooden pendant light with its interior?

With dark wood furniture, a light or black wooden pendant light creates a clear contrast. With light wood, a white or natural wood model stays in the same family. Wood and black metal matches industrial and modern styles; rattan or bamboo brings a softer note.

With which furniture to associate light or dark wood?

On a walnut sideboard, a wood and metal pendant light in black draws a readable contrast. On light oak furniture, a white wooden pendant light blends into the whole. On a glass table, a wooden pendant light above brings the missing material without covering the surface.

What colour pendant light for a dark wall?

On a dark wall, a white pendant light stands out and becomes the light point of the room. A black pendant light plays on the contrary the continuity, useful in an all dark wood interior. For a softer result, Nordic pendant lights and Scandinavian wooden pendant lights combine light wood and white.

At what height to install a pendant light above the table?

Adjust the height once the table is in place: the shade should hang low enough to light the surface without obstructing the view of the guests. The cables of these pendant lights are adjustable, often up to 140 cm or 170 cm. Check the max height of the model before drilling.

How to adjust the height of a dining room pendant light?

In general, the bottom of the shade is placed between 60 and 80 cm above the surface, depending on the size of the guests and the width of the table. The cables of this selection are height-adjustable. Adjust before fixing, never after.

What distance between the table and the shade?

The wider the shade, the higher it can stay: a 34 cm dome placed 70 cm from the surface lights widely, a narrow shape needs to go a little lower. On a multi-point model, adjust each cable to the same height to avoid the imbalance effect. A simple marker: the eyes of the guests remain below the shade.

How to maintain a wooden pendant light without damaging it?

For a wooden pendant light, dust dry with a soft cloth or a feather duster, without water on the sockets or abrasive product. We do not strip a luminaire under power. If the wood is varnished, the varnish protects the material: better to keep it than to remove it.

How to remove varnish from wood?

On a pendant light, we do not remove it: the varnish protects the wood and the electricity. Stripping concerns a piece of furniture, and is done with the power off, in a ventilated room. Removing varnish from wood naturally does not give a reliable result on a luminaire, and baking soda does not replace a complete stripping.

How to clean a wood and metal pendant light?

A dry microfibre cloth is enough on wood as well as on steel. On the Corallo pendant light in steel, a slightly damp cloth goes over the tubes, never on the G9 sockets. For a designer wooden pendant light with a thin frame, a soft brush reaches the corners without scratching the finish.

Wooden pendant light for kitchen and damp room: what to check?

For a kitchen, an IP20 pendant light is suitable above the island or the table, away from the sink and direct steam. For a terrace or a damp room, choose an IP54 model like the Noreia pendant light. Always check the protection rating before installation.

Which pendant light above a kitchen island?

A tube or a compact dome wipes with one gesture and does not catch grease. In general, count one light point every 60 to 80 cm along the island. Slim models like the Pastella pendant light or the Nara, a 30 cm tube, keep the view clear. For a long kitchen, LED pendant lights for kitchen distribute the light better.

Can a wooden pendant light be installed outdoors?

Only IP54 models are intended for a terrace or a damp room. The Noreia pendant light in woven bamboo is rated IP54 and is intended for the terrace. An Aritorora pendant light in woven rattan is also IP54 and dimmable. Outside these references, stay indoors.

LED pendant light or bulb pendant light: which choice?

An integrated LED pendant light offers a homogeneous source and often a slim format, like the tube models. A pendant light with E27, G9, GU10 or E14 socket lets you choose the bulb and replace it. Some models are dimmable: check this mention before purchase.

Can the bulb of an LED pendant light be replaced?

On an integrated LED, no: the source is sealed in the luminaire, as on the Marsamissa at 5 W. On a socket model, replacement is immediate, and that is the interest of an E27 or a G9. This selection remains mostly bulb-based, which leaves control over power and shade.

How to know if a pendant light is dimmable?

Compatibility is indicated on the model sheet, never guessed. Some luminaires accept it, others do not. If you are looking for this criterion first, browse the wooden LED pendant lights and the models already identified in the dimmable pendant lights. A poorly matched dimmer can make the LED flicker.

Can you make or install a wooden pendant light yourself?

Making a wooden pendant light requires mastering the wiring, the earthing and the distance to flammable materials. The ready-to-install pendant lights in this collection avoid these risks: they come with their cable and socket. Always cut the power before installation.

What checks before installing a pendant light?

Cut the circuit breaker, identify the live and neutral, and respect the max power indicated for the socket: E27 up to 60 W depending on model. Check the max cable height and the protection rating of the room. For a strong style, first compare the industrial style wood and metal pendant lights.

How to install a wooden pendant light on the ceiling?

Fix the ceiling rose into a solid material, never into a hollow ceiling alone, and provide a plug suitable for the weight of the luminaire. Adjust the cable length on the ground before going up, then lock. Tighten the connections and restore power only once the luminaire is suspended. See also the black wood and metal pendant lights.

Frequently asked questions about wooden pendant lights

Secure payment, tracked delivery, returns and Designix customer service: you order with peace of mind, and you can change your mind if the result does not match the room. To compare styles before deciding, browse the designer wooden pendant lights then all our lights.