Wireless motion-sensor outdoor lights

This selection is also available in our French store: Luminaires d exterieur à détecteur de mouvement sans fil

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Wireless motion-sensor outdoor lights
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

A wireless outdoor motion sensor light installs without a cable: a self-contained power supply, solar or battery, and an infrared sensor that switches the light on as you pass. Front door, gate, driveway, patio: here is how to choose the right IP rating, range and mounting for each area of the house.

What is a wireless outdoor motion sensor light?

A wireless outdoor motion sensor light works without a mains connection: a solar panel or batteries power the lamp, and a passive infrared sensor switches it on as soon as movement crosses its detection cone. No trench, no electrician: you screw it on, aim it, and the area lights up when you walk past.

Wireless outdoor motion sensor lights

The category covers wall lights, floodlights, bollards and post models. All share the same principle: a self-contained power supply, a sensor that reacts to the heat of a moving body, and a timed switch-on. The starting point is knowing whether the wall is exposed to the sun or stays in shade, because that decides the power supply. To compare the available formats, the motion sensor lighting range groups the models by use.

Wired or wireless: what is the difference day to day?

A wired model needs a power supply and work on the circuit; it lights without any charge limit. A wireless model takes ten minutes to fit on a wall that is already rendered and can be moved if you rearrange a flower bed. The trade-off is maintenance: batteries to replace, a solar panel to keep clear. Wired remains the choice for an already cabled wall, wireless for a bare wall, a shed or a rental.

What light does a motion sensor give in a yard at night?

The sensor triggers the light for a set duration, then switches it off. The result: an area that lights only when someone approaches, a readable path to get home in the evening, and the option of keeping a low glow as a night light rather than a wall lit all night. The bulb does not have to run all night.

The effect depends mostly on orientation: a floodlight sweeping the driveway draws a clear path, a wall light near the door lights the arrival without dazzling whoever is looking for their keys. Night-light mode is useful for a front door visible from the street; full switch-off suits a patio where you want darkness. To line a driveway with a low, discreet glow, the bollards and post lamps for lining a driveway fit without a cable and direct light towards the ground.

Where to install a wireless sensor light around the house?

The useful spots are the front door, the gate, the driveway, the patio, the outdoor stairs and the garden shed. Choose a rain-resistant model for an exposed wall, a post model to line a driveway, and avoid aiming at a permanent walkway that would trigger constantly. The sensor faces the arrival point, never a wall or a window.

Front door, gate and driveway

Near the door, a narrow-beam wall light illuminates the threshold and the lock. At the gate, a wide-beam floodlight covers a vehicle passing through, without aiming at the street where passers-by would trigger it all evening. On a light-coloured wall, white models on a pale wall blend into the render.

Patio, garden and poolside

On a covered patio, a pendant light for a covered patio placed above the table lights dinners without lighting the whole yard. Near the pool, you need a low bollard and a safety distance: to light the poolside, avoid anything that could fall into the water.

How to choose the sensor range, angle and delay?

Range is the distance at which the sensor picks up movement, angle is the width of the cone, delay is how long the light stays on. A narrow cone targets a door, a wide cone covers a driveway. A precise range and a short delay are better than a maximum setting that triggers on every pass.

Range and angle: drawing the covered area

Adjust by walking: step back to the intended limit and check that the light comes on there, not twenty paces earlier. A sensor mounted too high loses accuracy on small movements; one mounted too low reacts to animals. The angle should follow the geometry of the place, not the other way round.

Delay and dusk sensor

A short delay is enough to cross a front door; on a staircase, a few extra seconds stop you being left in the dark halfway up. The dusk sensor prevents switch-on in broad daylight, which drains batteries for nothing. A medium sensitivity limits triggers caused by wind in the foliage.

Solar, battery or mains: which power supply for a wireless light?

Solar suits bright spots during the day: the panel recharges the battery and the light comes on by itself in the evening. Batteries take over in a shaded corner or under a canopy, with replacements to plan for. Mains remains the solution when a power supply already exists near the mounting point.

Solar, battery or mains: comparing power supplies
Power supply Installation Maintenance Limitation Ideal for
Solar panel No cable, panel to be aimed Wipe the panel, monitor the battery Depends on sunlight, low in winter Driveway, gate, well-exposed wall
Batteries No cable, immediate fitting Replace batteries when the light weakens Recurring replacement, less consistent Shaded corner, shed, rental
Mains Cable to be connected by a professional Almost none beyond cleaning Electrical work to plan Already powered wall, covered patio

Which IP rating to choose for an outdoor light?

The IP rating describes resistance to dust and water. IP44 is enough under a sheltered canopy, IP54 for a lightly exposed wall, IP65 for a part that receives rain, IP67 near a pool. A high rating does not make a light submersible, however: none of these models is fitted in water.

Reading the IP rating of an outdoor light
Rating Resists Typical use
IP44 Limited dust, water splashes Under a canopy, sheltered entrance
IP54 Limited dust, splashing Lightly exposed wall
IP65 Dust and water jets Rainy wall, driveway, gate
IP67 Dust and temporary immersion Poolside, without routine immersion

How to fit and maintain a wireless sensor light?

Fitting is done by screwing onto a solid support, at passage height, with the sensor aimed at the area to watch rather than at a wall or window. Maintenance is limited to wiping the sensor lens and the solar panel surface, and replacing the batteries when the light weakens. The housing stays closed.

At what height should the wall light or floodlight be fixed?

Around two metres, most sensors scan a pedestrian passage correctly; higher up, detection becomes less accurate on a fast-walking adult. Avoid fitting directly above a door, where the passage under the sensor is too short, and prefer a solid support to hollow cladding that will not hold the screw.

Cleaning the lens and the solar panel

A dusty lens triggers less reliably; a panel covered in leaves or droppings recharges less. A soft cloth is enough, with no abrasive product or pressurised water jet. If the light becomes weak or brief, check the battery before suspecting the sensor. A model for a contemporary outdoor look is as easy to clean as a classic one.

How to match outdoor lighting with the lights inside the house?

A wireless sensor light should be chosen in the same vocabulary as the interior: wall colour, material, line of the light. A discreet wall light near the door, a pendant under the covered patio, a more sculpted model for a visible entrance: the outside extends the mood of the house instead of contradicting it.

The colour of the render often dictates the rest: white and beige recede, black underlines a line, and copper that patinates over time takes on a different shade as it ages. The connection also plays out inside, in line with the door: LED living room lighting or a piece placed above the dining table echo the material seen outside. For a very polished entrance, exceptional pieces for a polished entrance or original decorative lights give a stronger outline. A hallway and lights for the WC call for the same consistency of tone, and a design in the kitchen should be chosen from the same family as the wall.

Where to buy lights: online or in store?

Sensor lights are found both online and in store. Online, you compare specifications and check the returns policy before ordering. In store, you judge size and colour in real life. In both cases, the product page must state power supply, IP rating and detection type.

At Designix, you order remotely with secure payment, tracked delivery, returns and customer service. Online, a complete product page lets you compare models at leisure, which matters for a wireless model where panel power and IP rating decide the use. You will find all Designix lights, and for a more sculpted wall, the outdoor pieces with a crafted design or the spots recessed into a slab complete the installation. A search such as destockage luminaires lyon often returns one-off promotions: check actual availability on site before travelling.

Before ordering, note the available wall width and the mounting height: that is what separates two models. Then browse our full lighting catalogue and let the area to be lit guide you rather than style alone.

Frequently asked questions

Can a wireless outdoor motion sensor light be installed indoors?

Yes, a wireless, self-contained model also works in a hallway, a garage or an uncabled corridor. Just check that the IP rating remains consistent with indoor use and that the sensor does not face a radiator or a window, which would trigger the light without any real movement.

How to replace a wired wall light with a wireless model?

Switch off the power at the breaker, remove the wall light and secure the wires in a junction box, without leaving them accessible. The wireless model is then screwed on at the same height, powered by batteries or solar. If the current must remain available at that point, a wired model is still preferable.

Which lights to choose for the WC?

For the toilet, look for a compact light that is easy to clean and well protected against humidity. A wall or recessed model with neutral light is enough for a room you pass through. The selection of lights for the WC helps compare formats before choosing the one that fits the room.

Lighting store in Lyon: what to check before travelling?

Before a trip, note the dimensions of the spot, whether a power supply exists and the IP rating needed for outdoor use. Then check that the shop displays the type you are looking for: wall light, floodlight or bollard. Returns conditions matter as much as the model seen on site.

Wireless outdoor motion sensor lights: which mistakes to avoid?

Three mistakes recur: aiming at a permanent walkway that triggers the light constantly, placing the solar panel in the shade of a wall or tree, and choosing an IP rating too low for a wall exposed to rain. A precise range setting is better than a maximum one.

Our advice for choosing
A wireless outdoor light with a motion sensor installs without running any cable: the power supply is self-contained, solar or battery, and the sensor switches the light on as you pass. Entrance, gate, path, terrace: here is how to choose the protection rating, the range and the installation suited to each area.