White wooden floor lamps

Screw an E27 warm white bulb, between 2700 and 3500 K, into a white wooden floor lamp for a cosy living room corner; switch to neutral white, between 3500 and 4500 K, for reading or working. Light wood and white go with almost any wall, and the IP rating decides whether the light stays indoors or moves out onto the terrace.

What light does a white wooden floor lamp give?

The light depends on the bulb you screw in: the E27 socket fits almost the entire selection, so you choose the temperature and the brightness. A fabric shade, as on Séva, Tribera, Sernorella or Carlyn, diffuses and softens the beam; a bare stem or diffuser gives a more direct light. Some references include a dimmer to lower the brightness in the evening.

Which is the whitest light?

Cool white, around 4500 to 6500 K, is the whitest: it lights clearly and leans slightly blue. Neutral white, between 3500 and 4500 K, is close to daylight, and warm white, between 2700 and 3500 K, gives a golden tone. If you want a crisp result, go for cool white; if you want softness, stay below 3500 K.

Warm, neutral or cool white: which to choose for the evening?

In the evening, warm white relaxes: it is the temperature for sofa corners and bedrooms. For reading or working next to the floor lamp, neutral white tires the eyes less than cool white. Cool white is better kept for a terrace or functional lighting. A dimmable bulb solves the problem: high during the day, low after dinner. See the white LED versions for fixed-temperature models.

Are white wooden floor lamps suitable for every room?

Yes for most of the selection, designed first for the living room, then for the bedroom and the office. A smaller share moves to the terrace and garden thanks to the IP65 rating, and a compact format slips into a hallway, corridor or child's room. White is never the limiting factor: floor space, available height and the IP rating decide.

Which rooms suit a white wooden floor lamp?

In the living room, it brings the extra light ceiling fixtures lack: near the sofa, in a free corner, along a bookshelf. In the bedroom, a model with a fabric shade usefully replaces the bedside lamp and frees the nightstand. In the office, a straight stem lights the work surface without taking up space. To compare formats suited to a living room, browse the wooden floor lamps for living rooms.

Can it go in a small bedroom or a hallway?

An articulated stem like Séva, articulated stem, 110 cm tall and 50 cm wide, fits into a corner and angles its head towards the bed or armchair. A 140 cm tripod model with a wide shade also suits a hallway if the passage stays clear. Measure the width of the base and leave at least 40 cm of walkway around it.

White wooden floor lamps: tripod, arc or straight stem?

The tripod is the most common shape in the selection: stable, it carries a large shade. The arc stem brings light over a seat without cluttering the floor, the straight stem slips into a corner, and the tube format, slimmer, stays discreet. Use decides, not fashion.

Tripod, arc, tube: which shape for which use?

The tripod is the obvious choice when you need broad light beside an armchair or a coffee table. The arc lights a sofa from a distance, with no base in the way: Arimilella reaches 210 cm and up to 240 cm depending on the setting. The straight stem and the tube dress a narrow corner and light downwards, near a desk. Wooden bases pair well with metal, as in the wood and metal combinations.

Which base for a 20 m2 living room?

In 20 m2, aim for a tripod around 165 to 170 cm for a seat, or an articulated stem if the furniture is against the wall. A large round shade, like Tribera with its tripod base, diffuses widely without glare. The arc is still possible but needs depth: count the real reach, not just the height.

Which size of white wooden floor lamp for which footprint?

Heights range from about 110 cm for a compact model to nearly 210 cm for an arc, with very different floor footprints: narrow base or wide tripod. Measure the floor space, the height under the bottom of the shade and the walkway around the base. A light that is too tall glares when you are seated, too low and it flattens.

How to read floor lamp dimensions before buying?

Three measurements matter: total height, shade diameter and base footprint. A shade 75 cm in diameter needs distance; a model 26 cm in diameter is happy in a corner. Also check the depth of the base, especially on arcs. Our full range of lighting lets you compare these measurements across several families.

Small format or tall: what to choose in a flat?

In a flat, a model between 140 and 165 cm covers most needs: it lights a seat without dominating the room. Above 175 cm, the shade must stay above the seated eyeline, otherwise it glares. A large arc is only justified if you have 2 m of clearance behind the sofa. For short, dressed shapes, see the white design selection.

Indoor or outdoor: which rating for a white wooden floor lamp?

The IP20 rating covers most indoor models, protected from water splashes. For a terrace or garden, you need an IP65 model made for outdoors: two references in the selection are, one of them solar-powered, with no cable to run. The rest of the selection stays inside.

Can an IP65 floor lamp stay outside all year?

An IP65 is designed to withstand water splashes and can therefore stay outside, including in light rain. The wood of the outdoor models is combined with plastic here, which limits refinishing over the years. In very cold winters or by the sea, bring it in if you can: it prolongs the finish. The white outdoor floor lamps catalogue groups these uses.

Solar or mains: what to choose on a terrace?

Solar avoids running a line from the house: Pivano and its solar power supply installs where no socket reaches, with a warm, neutral or cool white result depending on the setting. Mains is more consistent in winter, when days are short. If you want contrast rather than white, look at wood in black.

How to match a white wooden floor lamp with your decor?

Light wood and white go with almost everything: light walls, soft grey, beige, taupe, and they lighten a room dominated by dark wood furniture. The white and black version brings contrast, white and gold a more dressed note. Two or three materials per room are enough.

Which wall colour with dark wood furniture?

Off-white, greige, beige or pearl grey walls warm the room and let dark wood breathe, as it absorbs a lot of light. A white wooden floor lamp plays the same role: it lightens the space and creates a clear contrast with dark furniture. Avoid adding a third wood tone, unless it is very close.

White ceiling light and white wooden floor lamp: how to pair them?

A white ceiling light and a white wooden floor lamp complement each other if you stay in the same family of light tones: the ceiling light illuminates the room from above, the floor lamp brings light down to seat level. Two separate circuits let you adjust them independently. For styles, compare the Scandinavian inspiration and the modern wood models.

How to cover a glass table with wood?

You place a solid wood top or a plywood panel cut to the size of the glass, with anti-scratch pads underneath and without overhanging the edges. Many prefer a top simply placed, not fixed, to preserve the glass and be able to remove it. The light wood of the lamp and that of the top then echo each other without copying.

How to care for and refresh a white wooden floor lamp?

A soft, slightly damp cloth is enough for dust, and you avoid abrasive products on the wood as well as on the fabric shade. If the finish is worn, the wood is stripped and protected again, outdoors or in a ventilated room, keeping the electrical parts of the base sheltered.

How to remove varnish from wood?

Apply a stripper with a brush, leave it to work for the stated time, then remove the film with a scraper before sanding fine. Work with gloves and a mask, in a ventilated room. Unplug the floor lamp and keep the electrical compartment away from any splashes: water and stripper have no place there.

How to strip a varnished wooden piece of furniture?

The method is the same for furniture as for a lamp base: stripper, wait, scraper, progressive sanding, then protection with varnish, hard oil or wax. On a light finish, a bicarbonate of soda paste helps lift the film without attacking the wood. Allow for two coats of protection rather than a single thick one. For other wooden pieces, see the design wood pieces and our lighting range.

Which bulb, dimmer and warranty for a white wooden floor lamp?

Almost all models in the selection use an E27 socket: you choose the bulb, its temperature and its brightness. A few references are integrated LED or fitted with a dimmer. The warranty runs from two years on most of the selection to five years on some.

E27 bulb or integrated LED: what to choose?

The E27 socket leaves the choice open: you change the bulb, the temperature and the power whenever you want, and you replace a burnt-out bulb for a few euros. Integrated LED, as on Noa II, cannot be replaced but states its temperature directly, here in warm white. For a light you will keep for a long time, E27 stays more flexible.

Dimmable floor lamp: what is it for?

The dimmer lets one lamp serve two moments: high during the day for reading or working, low in the evening for a soft mood. It is useful in a room used as both living room and office. A small share of the selection has one, and Carlyn and its conical shade shows how a fabric shade looks on a straight stem.

On budget, stay relative: some models are affordable, others are more crafted pieces, and the collection grid shows the current price of each reference. Secure payment, tracked delivery, possible returns and Designix customer service support you from choice to installation. For light and contrasting tones, also take a look at the white and black finishes, the white and gold and the linen and wood.

Frequently asked questions