Waterproof LED floodlights

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Waterproof LED floodlights
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Start by choosing the protection rating suited to the location, then the mounting, the orientation and the colour temperature: that order decides whether a waterproof LED floodlight will hold up outdoors. The models shown here work on a facade, a terrace, in a garden, a garage, a utility room, around a pond or on a boat, wherever water and damp remain present.

What is a waterproof LED floodlight, and how does it differ from standard LED lighting?

A waterproof LED floodlight is built to stay outdoors and keep working despite rain, water spray and damp, thanks to a sealed housing, gaskets and protected cable entries. Standard LED lighting, by contrast, fears water: its place is indoors or under cover.

Outdoor waterproof LED floodlight

What damages an ordinary light fitting outdoors is water getting in through the cable entries and pooling inside the housing: the electronics corrode, the metal pits. A waterproof model seals those entries with a gasket and a cable gland. The aluminium housing dissipates heat, the tempered glass or polycarbonate front resists impacts and UV. On a facade, an entrance or a terrace, that construction changes everything: the floodlight stays in place for years without anyone touching it. To place these models among our full range of light fittings, compare the protection rating first, before the looks.

Waterproof LED lighting

The phrase does not describe a single product but a family: floodlights, bollards, wall lights and recessed fittings meet the same need, lighting where water flows. An IP44 rating holds up against spray in an open shelter; IP65, IP67 and IP68 go further in resistance, right up to submerged parts. The term therefore indicates an environment constraint, not a power level. You will find the floodlight range and the variants listed under LED floodlights to choose according to the location.

Where to install waterproof LED lighting?

Anywhere water, damp or spray are regular: facade and entrance, terrace, garden and paths, garage and utility room, pond edge and fountain, boat pontoon, shower and damp room. What changes from one place to another is the mounting, the orientation and the protection rating needed.

Waterproof LED lighting for pond and fountain

Around a pond, distinguish what stays out of the water from what is submerged: they are not the same models. A white light illuminates the water without tinting it, a coloured version stages it in the evening. The pond-edge models and the concrete recessed models are planned during the works, because the cable run is decided before the finishing.

Waterproof LED lighting for garage

In a garage or utility room, dust adds to damp. Aim for even light, fixed to the ceiling or high on the wall, directed towards the floor to avoid glare when entering. Garage floodlights cover that need.

Waterproof LED lighting for boat

On a boat, sea air and spray attack more than ordinary rain: a corrosion-resistant housing, stable mechanical mounting and a compact format come first. Outdoor LED floodlights give a useful basis for comparison.

Which waterproof floodlight for which location?
Location What matters most Common mounting Useful option
Facade and entrance Directed light, discretion High wall mounting Motion sensor
Path and garden Orientation, no glare Stake or low wall mounting Solar or dimmer
Garage and utility room Even light, dust resistance Ceiling or wall mounting Motion sensor
Pond and fountain Submersion or spray depending on the model Recessed or dedicated mounting White or RGB colour
Boat and pontoon Resistance to sea air Mechanical mounting on a stable support Compact format
Shower and damp room Steam and spray Wall or ceiling mounting Moderate power, warm light

How to choose the power and colour temperature of a waterproof LED floodlight?

The power of a floodlight corresponds to what it consumes, not to the amount of light felt: distance, mounting height and the surface to cover matter just as much. Colour temperature is chosen for the mood, a warm white for a terrace, a neutral or cool white for a garage or a passage.

50 W waterproof LED floodlight: what the power really indicates

A 50 W waterproof LED floodlight consumes a given power, but two units of the same power do not light the same way depending on their optics and beam angle. A wide beam covers a large area with less intensity at the centre; a narrow beam reaches further. In general, the question is settled by use: lighting a wall from a distance, or washing a nearby terrace. To light a garden, two directed points are better than one pushed to the maximum.

Warm white, neutral white or cool white outdoors

Warm white (around 2700 to 3000 K) gives a light close to indoor ambience, pleasant on a terrace or near an entrance. Neutral white (about 4000 K) stays readable without coldness, suited to a path or a shelter. Cool white (above 5000 K) marks contrasts in a garage, a utility room or a site, but hardens a facade.

Motion sensor, dimmer or RGB: which options to choose?

The motion sensor switches the floodlight on as you pass: useful for an entrance, a path or a garage. The dimmer is used to adjust intensity, rather on a terrace. RGB changes the colour of the light, for a garden or a facade you want to bring to life. These options combine depending on the models.

Waterproof LED lighting with motion sensor

A waterproof LED light with a motion sensor replaces a switch you forget to flip. Check the detection range, angle and delay on the datasheet: badly set, it triggers for a cat or switches off too soon. Sensor models suit an entrance as well as a private car park.

Dimmer and RGB: when the option really changes the use

Dimmer floodlights are used to lower intensity in the evening without switching off, for a terrace where you linger. RGB versions aim at staging: pond, facade, flower bed. In both cases, check the compatibility of the control and the available power supply before buying.

Comparison of waterproof LED floodlight variants
Variant How it works For which use To check on the datasheet
Standard Switched on by a switch Permanent lighting Protection rating, orientation
With motion sensor Switches on as you pass Entrance, path, garage Sensor range and settings
With dimmer Adjustable intensity Terrace, garden Dimmer compatibility
RGB Changeable colour Garden, facade Control and power supply
Solar Battery recharged by the sun Garden corner with no socket Sunlight, battery life
Rechargeable Battery to recharge Occasional use, moving around Battery life, charging time
On a stand Placed or staked, adjustable Site, event, garden Stability, orientation

Solar or rechargeable waterproof LED floodlight: when to do without a fixed power supply?

Solar and rechargeable models avoid running a supply where the grid does not reach: back of the garden, shed, fence post or terrace with no socket. Because they depend on the sun or on battery charge, they suit occasional use rather than permanent lighting.

Solar LED floodlights: what limits their use

A solar panel only stores what it receives: in the shade of a wall or a tree, battery life drops. Solar floodlights are therefore useful at the edge of a plot or on an open fence, and prove disappointing under dense vegetation. They are backup points, not the pillar of facade lighting.

Rechargeable floodlights: corners with no socket

Rechargeable floodlights move around: they light a garden shed for an evening, then recharge indoors. Look at the stated battery life and charging time, two figures that decide the real use. For daily, permanent lighting, a fixed power supply remains the solution.

How to install and mount a waterproof LED floodlight?

A waterproof floodlight is fixed to the wall, to a room ceiling, on a stake or placed on the ground depending on its format. What matters: a mounting suited to the support, an orientation set before tightening and a protected cable entry, so as not to cancel the housing's sealing.

Waterproof LED lighting for shower

A waterproof LED light for a shower is chosen to resist steam and spray, with the connection placed out of reach of the direct jet. In a spacious room, a wall floodlight directed upwards lights without glare; in a small space, moderate power and warm light are enough.

Mounting, orientation and cable entries

Set the orientation before tightening for good, otherwise you will reopen the mounting and weaken the gasket. The cable gland must stay tight and the cable must run in a gentle slope under the housing, so water flows away from the entry. Floodlights on a stand avoid any wall mounting when the support is soft ground.

Which mistakes to avoid with a waterproof LED floodlight?

The most frequent mistakes: a protection rating too low for the location, a floodlight that glares instead of lighting, a base or LED type not checked, and an option paid for with no real use. Reading the full datasheet avoids most of these unpleasant surprises.

Choosing a protection rating that is too low

A model intended for light spray, placed near a pond or exposed to a jet, fills with water in the first season. Identify the environment first (out of water, submerged, sea air), then lower the IP rating only if the need justifies it. Online sale or not, the datasheet decides.

Paying for a useless option

A motion sensor in a garden already lit by a timer is useless; a dimmer on a floodlight switched fully on or off even less so. Also question the base: GU10, E27 or integrated LED are not replaced the same way. A well-chosen entry-level model lights better than an exceptional piece badly oriented. Industrial style and white finishes meet other criteria, the look of the facade.

How to maintain waterproof LED lighting and match it to the rest of the garden?

A waterproof floodlight is kept clean with a soft cloth and a little soapy water, without a direct jet or abrasive product. Check the gaskets and cable entries from time to time. And think of the whole: a floodlight matches other outdoor light fittings better than standing alone in the middle of a garden.

Cleaning without damaging the gaskets

High-pressure jets and aggressive degreasers attack the gaskets and end up creating the leak you wanted to avoid. A damp cloth on the front, a soft brush in the fins, and a check of the cable gland twice a year are enough. If a glass dulls or a gasket hardens, it is a sign that action is needed.

Matching several floodlights in the same outdoor space

Keep the same colour temperature across the whole facade, then vary the heights: one point high on the wall, another at the level of the flower bed. This avoids dark patches and over-lit areas. To complete the picture, browse our light fitting catalogue and see how a floodlight fits into all Designix light fittings.

Frequently asked questions about waterproof LED floodlights

Which waterproof LED floodlight to choose for outdoors?

A waterproof LED floodlight is installed outdoors when rain, water spray or damp are permanent: facade, entrance, terrace, garden, garage. First choose the protection rating suited to the location, then the mounting, the orientation and the colour temperature.

How to install waterproof LED lighting for a pond or a fountain?

Choose a model designed for water depending on whether it stays out of the water, near the pond, or is submerged. The mounting, cable length and power supply are planned from the start. A white light illuminates the water without tinting it, RGB allows it to be coloured.

Can waterproof LED lighting be installed in a shower?

Yes, provided the model is intended for damp rooms and the connection stays out of direct spray. A waterproof floodlight fixed to the wall or ceiling suits a spacious shower; in a very small space, a low-power model directed upwards avoids glare.

Which waterproof LED lighting for a boat?

On a boat, sea air and spray are more aggressive than rain: favour a corrosion-resistant housing, a stable mechanical mounting and a compact format. The housing material and the screws are two points that decide how well it lasts.

Do you need a 50 W waterproof LED floodlight to light a garage?

50 W is one power among others, not an obligation: what matters is the distance between the floodlight and the area to light, the mounting height and the use, occasional or permanent. In a garage, aim for even light without glare as you pass, and check the ceiling mounting.

What is the difference between a waterproof LED floodlight and an outdoor LED floodlight?

The two look alike, but sealing is the criterion that separates them: a waterproof floodlight is protected against water and dust, while an outdoor floodlight may only be intended for ordinary rain and use under cover. The datasheet decides, not the name.

How to light a garden corner with no electrical socket?

Where no fixed supply is available, a solar or rechargeable floodlight takes over: back of the garden, shed, fence, terrace with no socket. Because it runs on battery, it suits occasional use; for permanent lighting, a fixed power supply remains the solution.

Secure payment, tracked delivery, returns and Designix customer service accompany every order. Once your location and protection rating are settled, compare the available floodlights and choose the model whose mounting and orientation match your support.

Still hesitating between a fixed point and a mobile backup? Browse Designix light fittings and pick the solution that lasts on your facade as well as in your garden.

Our advice for choosing
Des projecteurs LED étanches pensés pour éclairer dehors, en local technique ou autour d'un bassin, là où l'eau et l'humidité restent présentes. Vous choisissez selon la puissance, la température de couleur, le culot et la fixation adaptés à la surface à éclairer.