Solar recessed deck lights
This selection is also available in our French store: Spots encastrables solaires pour terrasse
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A solar recessed deck light captures daylight through a small panel, stores it in a built-in battery and releases it in the evening as LED light. No cable to run, no socket to plan: the light fits flush into the deck, patio or poolside, and switches on by itself at dusk.
Contents: how it works, installation areas, size and material, light to expect, layout, installation and care, mistakes to avoid, matching the house.
How does a solar recessed deck light work?
Charging time depends on sunlight, and the light switches on below a brightness threshold.
A solar recessed light captures daylight through a small panel, stores it in a built-in battery and releases it in the evening as LED light. No cable to run, no socket to plan: the light fits flush into the deck, patio or poolside, and switches on by itself at dusk.
Solar recessed deck light for wooden decking
In a deck board, the housing sits within the thickness of the wood, the glass stays flush and the panel faces the sky. The cycle is simple: charge by day, light by night. Nothing to program, nothing to wire to the consumer unit. Installation therefore does not depend on where the power arrives, but on where the sun falls.
Solar recessed outdoor lights: what changes without wiring
No chasing into the slab, no trench in the lawn, no conduit to pass under a door. You move a light point without an electrician, and you add a light where the furniture has moved. The downside: recharging depends on the sun received. Find similar models in our solar outdoor lights and, for the rest of the house, in our lighting catalogue.
Where to install solar recessed outdoor lights?
Along a wooden deck, on a paved patio, at the edge of a pool or to draw a path: a solar recessed light goes anywhere the sun reaches the area during the day. It must stay clear, with no slab, flower pot or furniture above the panel.
| Area | Recess type | Preferred material | Light sought | Watch point |
|---|---|---|---|---|
| Wooden deck | Recessed into the board, slim model | Brushed stainless steel or aluminium | Warm white, directed at the ground | Water drainage under the board |
| Patio or slab | Flush recess, wide bezel | Stainless steel or composite | Neutral white for walking | Panel clear, no cast shadow |
| Poolside | Flush recess | Stainless steel resistant to splashes | Discreet warm white | Keep away from barefoot traffic |
| Path and step | Low recess or low wall light | Aluminium | Beam directed at the step | Mark the step without glare |
| Wall and fence | Adjustable ground light | Stainless steel or matt black | Wall washing | Direction to set after installation |
The deciding factor remains real sunlight: a low wall to the south, a canopy or a dense shrub is enough to deprive the panel of its charge. Flush models are grouped in our recessed outdoor lights, and the LED version in the solar LED outdoor lights.
Which size and material to choose for a solar recessed light?
The size is chosen according to the surface: a slim recess for a deck board, a wider bezel model for a slab or stabilised gravel. As for material, brushed stainless steel and anodised aluminium age better outdoors than plastic, which remains an option for occasional use.
Recessed in wood or stone: diameter and depth
Measure the available thickness before drilling: in a board, the housing must fit without going through. In a slab, the recess requires a drill suited to stone and a bed of sand or gravel to seat the fitting. A flush bezel prevents catching the foot and holding water at the edge of the hole.
Stainless steel, aluminium or composite: what lasts outdoors
Brushed stainless steel withstands splashes and deck washing. Anodised aluminium stays light and colour-stable. Composite suits tighter budgets in a less exposed area. An adjustable light is set after installation, which corrects a sloping slab: see the adjustable ground lights and the adjustable recessed lights.
What light to expect from a solar recessed light?
The light from a solar recessed light stays soft and localised: it highlights a deck edge or a step rather than lighting a large surface. Choose a warm white for atmosphere, a neutral white for walking, and aim the light at the ground to avoid dazzling guests.
| Light type | Effect | Recommended use | To avoid |
|---|---|---|---|
| Warm white | Soft atmosphere, close to a classic bulb | Meals, garden lounge, deck edge | Work or reading area |
| Neutral white | Sharper rendering, colours barely altered | Path, stairs, entrance | Relying on it for wide lighting |
| Wide beam | Pool of soft light | Marking an area, a patio | Lighting a precise point |
| Narrow beam | Crisp pool of light | Highlighting a step, a shrub | General circulation |
Consistent light colour between living room and deck
Keep the same white family across the lit area: two different temperatures on the same deck are immediately visible in the evening. The rule also applies between indoors and outdoors, especially when the sliding door stays open. To vary intensity inside the house, dimmable recessed lights and dimmable LED recessed lights offer adjustment that solar does not.
Avoiding glare: direction and position of the light point
A light point facing the eye as you sit down dazzles more than it lights. Aim the beam at the surface to reveal, not at guests' faces, and keep a distance between the light and the seating. A grazing light on a wooden board draws out the material without lighting the table.
How to lay out lights on a ceiling or on the deck?
Lights are laid out in a regular line, with tighter spacing near walkways and wider spacing along a wall, and the first point set back by half that spacing. Under a pergola or canopy, the same principle applies to the visible face of the ceiling.
How to lay out lights on a pergola ceiling
Align the points on one or two rows parallel to the edge, tighten near the posts and widen at the centre. Set the first light back from the edge by half the chosen spacing: without this setback, the area near the post stays dark and the result looks uneven. In the evening, regularity matters more than number.
Marking a path, a step or a deck edge
For a path, allow one point every two to three paces, depending on beam width. For a staircase, place the light directly above the step, on the wall side, and check visibility from the top of the steps. Dedicated models are gathered in outdoor steps and stairs and entrance lights.
How to install and maintain a solar recessed light?
Installation means preparing a recess in the surface, leaving the panel facing the sky and ensuring water drains under the light. Maintenance is limited to wiping the solar panel and the glass from time to time, especially when the days shorten.
Wiring-free installation: preparing the surface and drainage
Locate the spot in the sun, check that nothing overhangs it, then open the recess to the diameter of the housing. Allow a draining bed under the fitting and a slight slope: water must drain away, not stagnate against the seal. Check the protection rating stated on the model's datasheet before drilling.
Cleaning the panel to keep light in winter
When the days shorten, the panel produces less and the slightest film of dust costs you. A soft cloth on the glass and the panel is enough; avoid abrasives on stainless steel and acidic products on warm finishes. If a light stays off, clear the panel first before concluding it has failed. Other outdoor models can be found in the LED versions for recessing outdoors.
Which mistakes to avoid with solar recessed lights?
The most frequent mistakes: placing the light in the shade of a low wall or a plant, recessing it without drainage, mixing several white temperatures on the same deck and expecting it to light strongly. A solar light illuminates and marks out, it does not replace fixed lighting.
Another trap: recessing without having tested the real charge at that spot. Leave the fitting in place for a few days, panel facing the sky, before drilling. Also check consistency between points in the same area: two similar finishes and two different whites are more noticeable than a single flaw. To compare product families, browse all Designix lights.
How to match these lights with the home's decor?
Seen from the sliding door, deck lights extend the interior atmosphere: a matt black finish answers dark frames, a white colour blends into a light wall. Keeping the same white family between the two spaces avoids an unpleasant contrast in the evening.
Black, white or gold finishes: choosing according to the facade
Matt black fades once night falls and highlights graphic furniture. White disappears into a light slab or render. Gold warms an exotic wood or rattan deck. See the black finishes for the deck, the discreet white colour and the gold and brass tones.
A modern kitchen decor that extends onto the deck
If the open kitchen looks onto the deck, continuity comes down to two details: the finish of the lights and the white family. A modern kitchen decor with dark frames and a matt worktop pairs well with black recessed lights in the ground; a light interior will prefer stainless steel or white. For the interior side, the kitchen decor visible from the sliding door is chosen from the recessed kitchen lights and the recessed LED kitchen lights.
Secure payment, tracked delivery, returns and Designix customer service: everything you need to confirm your choice of finish and size before drilling the slab.
Frequently asked questions
Which solar recessed deck light should I choose?
Choose first according to the surface: a slim model for a wooden deck, a wider bezel for a slab or patio. Then look at the material, the panel orientation and the light colour, keeping the same white family across the whole lit area.
Do solar recessed outdoor lights give enough light?
They light in a localised way: borders, steps, paths, around furniture. They do not replace fixed lighting for dining or walking across a large deck. Their runtime depends on the sun received during the day and on how clean the solar panel is.
Do I need a high protection rating for a ground-recessed light?
Yes: a light recessed outdoors receives splashes, watering and ground moisture. The protection rating stated on the product datasheet must cover this use, and the model must allow water to drain. Check this point before drilling the slab.
Can solar recessed lights be installed on a patio floor?
Yes, if the patio is paved or stabilised and if the light sits flush so as not to catch the foot. Allow a clear area around the panel and avoid corners shaded by a wall or canopy, where recharging would be too weak.
What should I do if the light no longer switches on in winter?
Most often, the panel lacks light: short days, shade cast by a plant or dust on the glass. Clean the panel, clear it and check that nothing covers it. If the problem persists, the electronics or the battery are at fault.





