Solar motion sensor lights
This selection is also available in our French store: Luminaires solaires à détecteur de mouvement
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Choose the format before anything else: a wall light if you have a wall, a floodlight if you need to sweep a wide path, a lamp post or a stake where no support exists. Then check that the solar panel will receive daylight, because without recharging, no sensor will turn on.
Which solar motion sensor light should you choose for the area to be lit?
The choice depends first on the surface and the height: a wall light is enough near a door, an adjustable floodlight covers a wide path, a free-standing lamp post lights a terrace without wall fixing. Then check the sensor range and the possible orientation of the solar panel.
Outdoor solar motion sensor light: which format for an entrance?
In front of a door, you want to see the lock and the first step, nothing more. A wall light fixed beside the threshold gives that grazing light, provided its panel is not tucked under a dark canopy. If the facade is narrow, a model on a stake planted at the edge of the gravel will do, like the free-standing outdoor lights.
Solar lamp post with motion sensor: for which surface?
A solar lamp post with motion sensor is used to follow a path, not to flood an entire lawn. Allow for a passage area one or two metres wide: terrace, garage drive, around a bed. Beyond that, multiply the points rather than increase power, because recharging remains limited by the panel surface.
How does a solar motion sensor light work?
A photovoltaic panel recharges the battery during the day. At dusk, the twilight sensor allows the light to come on, then the passive infrared detector triggers the light as soon as movement crosses its field. Often, the light stays dim on standby and rises in intensity on passage, then switches off after a delay.
Solar motion sensor light: detection only or permanent standby?
In detection-only mode, the lamp stays off and comes on fully on passage: this is the most economical mode, suited to an entrance or a gate. In standby mode, it gives a faint glow and rises in intensity as you approach, which marks out a terrace without creating a black hole there. The third mode, continuous lighting from dusk to dawn, drains the battery faster and is reserved for an evening.
What happens when the battery is empty?
The light goes out, sometimes after only a few seconds of lighting: the sensor works, but there is no reserve left. This is not a fault, it is a recharging problem. The catalogue of all lights shows other families if your location remains too shaded.
Which format for which location: wall light, floodlight or lamp post?
A wall light is mounted on a facade, near a door or a gate. An adjustable floodlight is fixed high up to sweep a path or a courtyard. The free-standing lamp post is planted in a bed or a lawn, without drilling. The format is chosen according to the available support and the surface to be covered.
| Format | Location | What it lights | Point to check |
|---|---|---|---|
| Wall light | Facade, near a door or a gate | The threshold and immediate surroundings | Panel orientation from the wall |
| Adjustable floodlight | High up, under a roof overhang | A wide path or a courtyard | Setting the sensor angle |
| Free-standing lamp post | Lawn, bed, terrace | A passage area without wall support | Stability of the base and cast shadow |
| Bollard or stake to plant | Path edge, garden | A pedestrian path | Sensor height relative to the ground |
Solar motion sensor lights: can you light a path without drilling the facade?
Yes, with a model to plant or place whose panel is built into the body. The constraint then moves to the ground: you need loose soil to push the stake in and clear exposure all day long. A path lined with trees remains a poor candidate, even with the best light.
Floodlight or wall light for a gate?
The floodlight wins if the gate is wide or set back, because it can be adjusted in angle and covers the passage of cars. The wall light remains more discreet on a house wall. In both cases, a casing with a sober design blends better with a facade, a matter of taste as much as technique, and the outdoor lights with a contemporary design or a white finish for the facade pair easily.
How long does a solar motion sensor light stay on at night?
Runtime depends on the sunlight received, the battery capacity and the number of triggers. A well-oriented panel, without cast shadow, recharges longer; a standby mode uses less than permanent lighting. In winter or in cloudy weather, expect shorter nights.
What to do when the days get shorter?
Clear the panel of dead leaves and growing branches, reorient it towards the sun's path and switch to detection only. A model whose lighting duration can be set to the shortest holds up better through a grey week. If winter remains critical, keep the light for signalling a passage and not for lighting a meal outside.
Should you leave the light on continuous lighting?
Reserve this mode for evenings when you have guests, never for everyday use: it draws on the reserve without recharging between passages. The original and decorative lights in the house can take over as ambient light, on mains power, for long evenings.
Where should you install a solar motion sensor light for good detection?
Place the detector at passage height, facing the area to be monitored, without direct line of sight to a heat source, an extractor vent or moving foliage. The solar panel, for its part, faces south when possible, sheltered from shadow cast by a wall or a tree.
At what height should you mount a solar motion sensor wall light?
High enough for the beam to fall on the ground and not in your eyes, low enough for the sensor to see a person and not only their forehead. In practice, aim above shoulder line, avoiding sticking the unit under a roof overhang that would deprive the panel of daylight. Test at night before screwing it in permanently.
Should the sensor face the street or the door?
Towards the passage, so often towards the street if that is where you arrive, but narrowing the field so as not to pick up cars. A sensor that is too wide turns on for no reason and drains the battery. Near a pond, think about the reflection of the water, which can also trigger it, and look at the solutions for lighting around the pool like the recessed spots in a covered terrace.
Which IP rating should you choose for an outdoor solar light?
The IP rating measures resistance to dust and water. An IP44 withstands splashes and is suitable under a canopy or a sheltered facade. An IP65 resists water jets and is justified on an exposed facade, at the edge of a pool or on open ground. An outdoor light must in any case remain rainproof.
| IP rating | Resists | Suitable location | To avoid |
|---|---|---|---|
| IP44 | Water splashes and dust | Under a canopy, sheltered facade | Direct jet and immersion |
| IP65 | Water jets | Exposed facade, pool edge, open ground | Prolonged immersion |
Near a pool, which IP rating?
Aim for the top of the table and place the unit out of reach of permanent splashes. The same logic applies to a bathroom, where IP65 bathroom lights and IP44 models meet different zones around the water point.
Under a canopy, is IP44 enough?
Yes in most cases: the canopy cuts the driving rain and only lateral splashes remain. Still check that the light does not receive runoff from the roof, and that the panel stays outside, because a panel in the shade produces nothing even with the best casing.
How do you install and maintain a solar motion sensor light?
Installation requires no wiring: fix the bracket, orient the panel towards daylight, then set the sensitivity and lighting duration from the casing. Maintenance is limited to wiping the panel and the sensor dome, and removing leaves and dust that reduce recharging.
How do you set the range and lighting duration?
First set the duration to the shortest, then lengthen it only if the light goes out before you have finished climbing the steps. For range, walk around the field at nightfall with someone beside you: a sensor that turns on from the street is too wide. Also locate the brightness threshold, which decides the switch-on time, and the all available lights if you are looking for other shapes.
How do you clean the panel without damaging the light?
A soft damp cloth is enough, without abrasive product or pressurised water jet. Do it during the day, with the light off, and take the opportunity to check the fixing and orientation. A clean panel at the start of winter is better than an adjusted setting.
And indoors: when is solar not enough?
A solar light needs daylight to recharge its battery: in a corridor, a toilet or a kitchen without a window, it does not keep its promises. For these rooms, keep a mains-powered light, chosen for its format, its colour and, in a bathroom, its IP rating.
Toilet lights and kitchen lights: which solutions without daylight?
In windowless toilets, a fixed mains-connected light point remains the only reliable option, and the toilet light is then chosen on size and light colour. In the kitchen, light the worktop before the rest, with the kitchen solutions and the models with a crafted design.
Trendy lights: what are solar sensor models worth?
They are worth what their battery, their waterproofing and their settings are worth, not their silhouette. A well-finished casing does not make up for a panel in the shade. For the living room, look instead at LED lights for the living room, design pieces for the lounge and pendants above the dining table.
Should you buy your lights in a Lyon store or online?
Both approaches coexist: a lighting store lets you judge the light and the finish on site, an online order gives access to stock and models sold out in store. A Lyon lighting clearance sale helps for a single piece; for a complete project, compare above all the dimensions and the IP rating.
Lighting store in Lyon or remote purchase: what to check before travelling?
Bring your measurements and a photo of the location: the height under the canopy decides the format, and the wall colour decides the finish. On site, switch the unit on, look at the tint and the weight. An interesting Lyon lighting clearance sale is judged by the condition of the casing and the presence of the instructions, not by the label.
Original decorative lights: how to spot a piece that will last outdoors?
Look for the IP marking on the packaging, the thickness of the material and the way the panel is fixed. A piece with a refined finish can stay outside if it is waterproof, otherwise it lives under shelter. The rest is a matter of matching the facade.
Secure payment, tracked delivery, returns and Designix customer service: you order, you test at night, and you adjust the orientation if needed.
Frequently asked questions
Which solar motion sensor light should you choose for a path?
For a path, an adjustable solar floodlight fixed high up sweeps the passage better than a low wall light, because its sensor sees the person arriving from afar. A wall light is suitable near a door. Above all, check that the panel stays exposed to the sun and that the detector does not point towards moving foliage.
Does a solar lamp post with motion sensor light enough at night?
A solar sensor lamp post lights a path and signals a passage; it does not replace working lighting. Its power depends on the day's recharging and the number of triggers. Better to target a precise area, an entrance or a terrace, than a large surface.
Outdoor solar motion sensor light: where should you fix it?
Fix the light on a facade or a post, on the passage side, so that the sensor sweeps the area to be covered and the panel receives daylight. Avoid pointing it towards a heat source, ventilation or the street, which cause unnecessary switch-ons.
Do solar motion sensor lights work in winter?
Yes, but for less time: with short days and an overcast sky, the battery recharges less and runtime drops. Orient the panel towards the south, clear it of cast shadows and clean it. A model with a standby mode, which lights strongly only on passage, holds up better in winter.
Are trendy motion sensor lights reliable?
Their reliability depends on three elements: battery quality, casing waterproofing and the accuracy of the settings. A badly oriented detector or a panel in the shade gives the impression of a fault. Look at the material, the IP rating and the ability to adjust sensitivity and lighting duration.





