Solar LED panels
This selection is also available in our French store: Panneaux LED solaires
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Start with the area to be lit: a driveway calls for an adjustable floodlight, a terrace for diffused light, a staircase for a model with motion detection. The panel goes in the sun, the luminaire where it is needed, and the IP rating decides between an exposed outdoor spot and a sheltered room.
Which solar LED floodlights should you choose for each area to be lit?
The area dictates the type of luminaire, the panel orientation and the level of protection. A wall-mounted model is not installed like a pergola spotlight. To choose solar LED floodlights for a given area, check the sun exposure at the mounting point, the degree of protection suited to outdoors or damp, then the type of fixing and the distance between panel and lamp. A facade exposed to rain, a shaded pergola and a garden wall do not call for the same detection settings or the same battery life.
Outdoor and garden solar LED lighting
For a driveway or a flowerbed, an adjustable floodlight sends light where people walk, without lighting up the sky. On a terrace, a wide diffusion is preferred, less dazzling when sitting. The housing must withstand rain: look for a high IP rating and a properly fitted seal. Browse our outdoor luminaires to see the available mounting styles.
Indoor solar LED lighting
In a shed, a cellar or a cabin without a socket, choose a solar lamp whose panel stays outside and whose luminaire stays inside, connected by a cable. Check the length of that cable before buying: it determines whether the panel reaches the sun. See lighting a garage or shed.
Pergola and staircase solar LED lighting
Under a pergola, the luminaire is fixed to the slats, high enough not to dazzle seated people, and the panel goes on the roof or at the end of the structure. On a staircase, a model with motion detection is enough: the light comes on as you approach and goes off afterwards.
| Area to be lit | Suitable luminaire type | What the light should do | Point to watch |
|---|---|---|---|
| Garden and driveway | Adjustable floodlight on stake or wall | Directional light on passage | Panel clear of plants and shadows |
| Terrace and pergola | Wall light or wide-diffusion spotlight | Non-dazzling ambient light | Fixing under slats and cable length |
| Facade and entrance | Wall floodlight with detector | Switches on with presence | Do not aim at the street or public passage |
| Staircase and outdoor corridor | Luminaire with motion detection | Brief, repeated lighting | Detection height and sensor angle |
| Room without mains | Ceiling solar lamp | Supplementary lighting | Panel to be placed outside, cable to be routed |
How does photovoltaic LED lighting work, from panel to lamp?
Photovoltaic LED lighting turns daylight into evening light: the panel charges, the battery stores, the sensor triggers.
Panel, battery, detector: what lies behind the luminaire
This collection contains no products at the moment: no material, no socket, no IP rating, no light temperature and no panel dimension can therefore be verified here. The range of LED panels remains available for the shop's other references, and this page will be completed as soon as documented models are added.
Battery life and days without sun: what to look at
Battery life depends on exposure, season and how clean the panel is. A sensor facing due south, with no cast shadow, holds up better than a model placed under a tree. In winter, output drops and the cold reduces battery capacity: plan for intermittent use rather than continuous lighting all night.
Solar LED lighting with detector: what is the point and where to place it?
Solar LED lighting with a detector only switches on when someone passes: the battery lasts longer and the area stays dark when no one is moving.
Motion detector or dusk-to-dawn sensor
The dusk-to-dawn sensor switches on at nightfall and keeps the lamp on for several hours: handy for an entrance you want to see when you arrive. The motion detector triggers on presence then switches off after an adjustable time: more economical, ideal on a passage. The two are often combined, with adjustable sensitivity and delay.
Where to place a solar floodlight with detector without false triggers
Mount it high, aimed at the traffic area, away from moving branches and heating vents. Do not aim at a road or public passage. And keep the solar panel out of the detector's field, otherwise it will trigger in broad daylight thinking it sees movement. A wall-mounted model is easy to fix to a facade, as offered by an LED solution for a covered car park.
Which powerful solar LED floodlight should you choose for a yard or car park?
For a yard or car park, go for a solar floodlight with a separate, adjustable panel and an adjustable detector. The power printed on the packaging says nothing on its own: cross-check it with the panel size and the stated area.
Reading a solar LED panel spec sheet without getting the numbers wrong
Look at the IP rating of the luminaire and of the panel, they must be consistent. Check the type of detection and whether it is adjustable. Compare the stated power with the panel size: high power on a small panel rarely lasts a whole night. If two values contradict each other, trust the power and the area actually described, never the most flattering figure.
Colour temperature: warm white, neutral white or cool white
Warm white (around 2700 to 3000 K) suits a relaxation corner or a terrace. Neutral white (around 4000 K) stays readable for safe movement. Cool white (above 5000 K) serves a work or inspection area, but hardens a facade. These are orders of magnitude, not an absolute rule.
Solar LED panel or mains-powered LED panel: which to choose?
Solar suits supplementary, intermittent lighting or an area without mains. A mains-connected LED panel remains preferable as soon as continuous, stable light is needed for several hours, whatever the weather.
Situations where solar is enough
Driveway, shed, terrace, outdoor staircase, pantry: wherever people pass without staying, solar avoids running a cable from the consumer unit. In a secondary room used for a few minutes, a ceiling solar lamp does the job.
Situations where a mains-connected LED panel remains preferable
Living room, kitchen, office: steady intensity and instant switching are expected there, without depending on the day's weather. There, LED panels connected to the mains take over, and solar complements the outside of the house. The two often combine very well, see the full luminaire catalogue.
| Criterion | Solar LED panel | Mains-connected LED panel |
|---|---|---|
| Connection | No power cable to run | Requires an electrical supply |
| Battery life | Depends on exposure and season | Continuous as long as the circuit is powered |
| Available intensity | Limited by panel size and battery | No weather-related constraint |
| Maintenance | Panel cleaning, battery to monitor | Diffuser cleaning |
| Recommended use | Supplementary, outdoor, isolated area | Living room, kitchen, lounge, work |
Ceiling LED lighting: when solar is not enough indoors?
Solar lights the outside and secondary rooms; in a living room or kitchen, a LED ceiling light provides continuous, even light, without depending on the day's sky.
LED ceiling light, LED chandelier or wall light: which complement to choose
A modern LED ceiling light covers a living room with even light; a powerful model suits a large surface. For a kitchen, a modern LED kitchen ceiling light stays flat and easy to clean. An LED living room chandelier adds an accent above a table, and a powerful LED wall light illuminates a load-bearing wall when the ceiling is not available. For an LED living room chandelier, check the clear height above the table, the diameter relative to the tabletop and the colour temperature; for a powerful LED wall light, check the luminous flux, the IP rating and the space available on the wall. Compare these families in ceiling lights and LED panels.
Replacing a recessed LED ceiling spotlight: the procedure
Switch off the circuit at the consumer unit. Pry the trim to release the spotlight, unplug the connector, then note three things: the cut-out diameter, the available depth and the type of socket or module. The replacement must match on these three points. A cuttable LED strip, on the other hand, is only cut at the marks printed on the circuit.
How to install and maintain a solar LED panel?
First fix the panel in a clear spot, facing the sun, then the luminaire at the height of use, checking the cable length before drilling.
Orientation, height and cable length
Aim for due south exposure, with no cast shadow during useful hours. Place the luminaire at the height that lights the area without dazzling: under a pergola, at slat level; on a facade, above the passages. Unroll the cable before drilling to confirm the actual distance between panel and lamp. For a technical room, see the LED panels for a technical room.
Cleaning, winter and battery
Dust the panel two to three times a year, remove snow without scraping, check the seal and the cable gland. Cold reduces battery capacity: shorter lighting in winter extends its life. If the light drops noticeably after several seasons, the battery is often the first thing to replace.
Before confirming your choice: note the area to be lit, the mounting height and the distance between panel and luminaire. Secure payment, tracked delivery, returns and Designix customer service are there if a reference does not suit. Find all Designix luminaires to complete the outside, or replace a ceiling light with an LED panel indoors.
Frequently asked questions about solar LED panels
Which solar LED light should you choose for indoors?
For a room without a socket or mains, choose a solar lamp whose panel stays outside and whose luminaire stays inside, connected by a cable. Check the length of that cable, the fixing method and whether the battery is replaceable. This lighting remains supplementary, not the main light of a living room.
Which solar LED light for the garden and outdoors?
In a garden, an adjustable solar floodlight lights a driveway or a flowerbed, while a wall light or wide-diffusion spotlight suits a terrace. Look first at the IP rating of the housing, the possible panel orientation and the type of detection, rather than the stated power alone.
How does solar LED lighting with a detector work?
The photovoltaic panel charges the battery during the day. At nightfall, the device is ready; when the detector senses movement, the LED switches on for an adjustable time, then goes off. This intermittent operation preserves the battery and avoids lighting an empty area all night.
Which powerful solar LED light should you choose for a yard?
Choose a floodlight with a separate, adjustable panel, whose housing is designed for outdoors, with detection adjustable in sensitivity and duration. Cross-check the stated power with the size of the solar panel and the stated area: high power on a small panel rarely promises steady light all night.
How to install solar LED lighting under a pergola?
Fix the luminaire under the slats, at a height that does not dazzle seated people, and place the panel on the roof or at the end of the pergola, facing the sun and clear of shadows. Check the cable length before drilling and keep the detector out of the panel's field.
Can you light a staircase with solar LED lighting?
Yes, provided you choose a model with motion detection rather than permanent lighting: the light switches on as you approach and goes off afterwards, which is enough to secure the steps. Mount the luminaire high enough to cover several steps and keep the solar panel exposed and out of reach.





