Construction site floodlight

This selection is also available in our French store: Projecteur de chantier

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Construction site floodlight
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Place the site work light above the work area, pointing down, and start from the surface to be covered: that is what decides the model, not the power rating printed on the box. A work light is chosen on three concrete points: where it will be mounted, how it is powered and the moisture it will have to withstand.

What is a site work light for?

It replaces daylight over a specific work area: renovating a room, fitting joinery, repairs, a workshop, a yard or a plot of land. You set it on the ground, on a tripod or on the wall, then aim the beam at what you need to see at that moment. The unit follows the workstation; it does not decorate the room.

An LED site work light or a work lamp?

A work lamp sits on a trestle and lights broadly, so you can see a whole room. A work light, by contrast, is mounted with a bracket, tripod or plate, and is adjustable: it sends light onto a chosen surface, at a distance. Compare the two formats in all our work lights before deciding.

Site work light or video projector: what is the difference?

The words are close, the function is unrelated. A video projector casts an image onto a screen and needs a projector mount; a site work light casts light onto a work surface. Both families are found in our lighting range, sorted by use.

Which LED site work light should you choose to light a work area?

Start from the distance between the unit and the surface, then from the contrast needed: an LED work light placed close to the wall being worked on gives a sharp beam, while a unit set further back spreads wider and flattens relief. Use decides, the datasheet follows.

Which type of site work light depending on use
Use Power supply Mounting Decisive criterion
Indoor renovation, room without lighting Mains or battery Set on the ground, adjustable Beam direction and weight
One-off job with no socket available Battery Handle or tripod Runtime at full power
Permanent lighting for a yard or car park Mains Wall or tripod Moisture protection
Workshop, garage, utility room Mains Bracket or suspended Sturdiness of the housing
Area to switch on automatically in the evening Mains Wall Detector settings and range

How do you aim and frame the beam?

Aim at the useful area, not the whole room: a tight beam on the workbench or partition tires the eye less than grazing light across the whole space. Set the angle with the unit switched off, then check standing up, in the place where you will be working. The range of LED work lights is well suited to this adjustment thanks to its brackets.

Fixed or adjustable work light for a workstation?

Adjustable if the workstation moves around the room: you re-aim without dismantling. Fixed if the area does not change, with the advantage of a more rigid mount. For a yard or a plot of land, an outdoor LED work light mounted high and angled covers more usefully than a source at head height.

Cordless or battery-powered site work light: how to choose?

First check whether the site has power. With no socket, a portable battery-powered work light with a handle sets up in a minute and follows the operator; with a socket nearby, a mains model stays lighter and works without interruption. In between, a removable battery lets you charge a second battery while the first is working.

How long does a site work light last on battery?

Useful runtime is read at full power, not in eco mode: that is when discharge is fastest. It also drops with cold and with the age of the battery. Compare battery-powered work lights on this criterion rather than on the runtime quoted at low intensity.

Battery-powered site work light: what to check before buying

The weight once equipped, charging time, the option of switching to mains as a backup and battery replacement. A built-in battery simplifies transport; a removable battery avoids having the unit out of action during charging. Rechargeable LED models cover both cases.

Tripod site work light: what solution for working at height?

A tripod places the source above eye level and frees both hands: light comes down onto the work surface instead of heading for your eyes. Three points decide: the size of the base, the adjustable height and the presence of a bracket that locks the angle once set.

What mounting height for a tripod work light?

Above eye level, angled down and towards the area, never facing the operator. Indoors, the height of the stand is enough; outdoors, go higher to light broadly and limit glare. See the tripod-mounted models.

How do you stabilise a tripod work light outdoors?

Wide base, flat ground, weighted or anchored feet if the wind catches. A light tripod is fine indoors, not on an exposed plot. LED work lights for mounting at height with a wide base hold better on uneven ground.

What is a professional site work light?

A unit designed to be transported and tightened every day: a housing that takes knocks, a handle, solid mounting, dust seals, electronics that withstand cycles. The quoted power says nothing about the optics or about durability, two points that separate a stopgap model from one that lasts.

Technical criteria to check on a site work light
Criterion What to look at Why it matters
Ingress protection rating The level of sealing stated for the housing Outdoor use wears out a poorly protected housing
Housing material Aluminium, reinforced plastic, quality of seals Impact resistance and durability
Heat dissipation Fins, body volume, cooling An LED that heats up loses performance
Power supply Mains, removable or built-in battery, cable Determines weight and where it can be used
Mounting Bracket, tripod, wall plate, handle Governs the stability of the setup
Adjustment Bracket travel, ball joint, locking Lets you aim at the area without glare

IP rating: which one to look for on a site?

The IP rating gives two pieces of information: protection against dust and against water. A dry room is fine with a lightly protected housing; an outdoor site, a yard or a damp area require a sealed housing, to be read in the model's datasheet. See the sealed work lights.

Aluminium or reinforced plastic housing: what is the difference on a site?

Aluminium dissipates heat and ages well, but weighs more. Reinforced plastic takes knocks and stays light, with less dissipation at high power. For a fixed workstation in a utility room, look at the industrial work lights.

Site work light or outdoor work light: how to avoid getting it wrong?

The first is taken down and stored, the second stays screwed in place and is part of the building. What decides is the intended mounting and exposure to rain. A sealed model with a wall plate can serve both, provided it is fixed once and for all.

Can a site work light be installed permanently in a garden?

Only if the housing is designed for outdoor use: an indoor unit placed under a canopy will not survive a wet season. For lasting lighting, an outdoor work light installed out of reach is better. A wall-mounted work light settles the question of the mount and keeps the source away from view.

Industrial work light or site work light for a workshop?

If the unit stays in place and lights a fixed station, an industrial model lasts better. If it has to follow the jobs, keep the portable format. On a visible facade, work lights with a refined design own their presence instead of hiding it.

How do you install and maintain a site work light?

Mount on a stable support, aim at the area, protect the cable or battery from moisture, cut the power before any cleaning. The rest comes down to two actions: dusting the optics and checking the mountings after every move, because a bracket that works loose brings the beam down.

How do you fix a site work light without drilling?

A stand, a tripod or a bracket clamp is enough for a temporary site and for a rental. For lighting that stays, a plate screwed into the wall or roof structure is safer. Terrace work lights are often surface-mounted. Models for garages are fixed to the ceiling, out of reach.

How do you clean and store a site work light?

Dry cloth on the optics, soft brush on the fins to keep dissipation, check the seals and screws. Store in a dry place, battery partly charged, cable coiled without tight folds: a unit stored damp oxidises faster than it wears out.

What mistakes should you avoid with a site work light?

Five traps come up again and again: lighting too broadly, aiming at the operator's eyes, placing on a wobbly support, leaving an indoor unit outside, relying on full-power runtime all day. Each has its fix: tighten the beam, raise the source, stabilise the stand, check the ingress protection rating and plan a spare battery.

Why does a site work light cause glare?

Because the source is in the line of sight, or because the beam spreads over a bright surface towards the operator. The remedy lies in the setup more than in the model: raise it, tilt it downwards, or move the light to the side of the area.

Do you need a motion sensor on a site work light?

On a site, no: the sensor cuts the light as soon as you stand still, which gets in the way of the work. In a yard or a passage, it switches on at the right moment and off by itself; see the versions with motion sensor for that use.

Secure payment, tracked delivery, returns and Designix customer service: these four points come with every order, from choosing the model to assembly.

To get concrete, compare mountings and power supplies in the work light catalogue. Then complete your installation by browsing the Designix catalogue, where lighting families are sorted by room and by use.

Frequently asked questions

Which cordless site work light should you choose?

Choose first according to the location: with no socket available, a battery-powered model with a handle can be carried and set up in a minute. Then check the quoted runtime at full power, the charging time and the option of running on mains as a backup, so as not to interrupt the work.

Which tripod site work light should you use to light a work area?

Favour a stable tripod, height-adjustable, with an adjustable bracket that places the source above eye level. A folding tripod is easier to carry from one room to another. Outdoors, check the base on the ground and wind exposure before mounting the work light.

Which LED site work light for a renovation?

For a room under works, an adjustable LED model set on the ground or on a tripod is enough: it moves with the jobs, does not cause glare when aimed at the wall and does not heat the work area. Keep fixed and heavily protected versions for outdoors and permanent installations.

Can a site work light be used outside in the rain?

It all depends on the product's ingress protection rating: a model designed for outdoor use resists dust and water splashes, an indoor model does not. Read the datasheet before leaving the unit outside, and bring it in once the site is finished.

How do you fix a site work light without drilling?

Use a stand or a tripod, or a mount fitted with a bracket and a clamp depending on the configuration. The no-drill route suits temporary sites and rentals; for permanent lighting, a screwed plate remains more stable and safer over time.

Our advice for choosing
Work site floodlights for lighting a work area, whether for renovation or outdoor use: LED models, cordless battery-powered versions, stand or wall mounting, to be chosen according to runtime, protection rating and the area to be covered.