Scandinavian lampshades

A scandinavian lampshade comes down to three things: a round shape, a light tone and an E14 fitting. The Nomi table lamp brings these codes together in white metal, with a spherical diffuser 20 cm in diameter and a total height of 50 cm, for a living room, a bedroom or a reading corner.

What are the features of the scandinavian style?

Spot three signs and you have the style: a round silhouette, a light tone, no ornament. White metal, the round shape and an E14 fitting set the scene on their own, without overloading a living room or a bedroom. The soft light does the rest, and matters as much as the line.

Scandinavian style lampshade: the codes to recognise

The round shape avoids angles and rounds off the silhouette of the lamp. The white tone reflects light instead of absorbing it, which brightens the furniture the lampshade sits on. The absence of pattern, frill and gilding keeps the design readable from a distance. The nordic style is played out there: little material, a single colour, a clean volume.

The Nomi table lamp illustrates this approach: metal and steel, white colourway, contemporary and nordic style, E14 fitting. It sits alongside other lampshades with a contemporary design in our lighting catalogue.

Designer scandinavian lampshade: why simple lines age well

The product sheet lists white metal, an E14 fitting and a total height of 50 cm. Care follows the same logic, a quick wipe is enough, and restraint forgives house moves, sofa changes and repainting. It is a purchase you keep longer than a very distinctive piece.

What light does a scandinavian lampshade give?

Count on an accent light, soft and enveloping, never a harsh beam. The opaque metal surface reflects the output towards the top and bottom openings, and the round shape spreads it around the diffuser. With a 10 watt LED bulb in an E14 fitting, the lamp accompanies reading or waking hours without dazzling.

The bulb stays inside the diffuser, so the eye never meets the source directly: that is what makes the lighting comfortable near an armchair or a bed. A scandinavian lampshade does not replace the ceiling light, it completes the room and creates a calmer zone. To compare silhouettes, the lampshade guide details each family of shapes.

Which material to choose for a scandinavian lampshade?

White metal and steel give a clean finish, easy to clean, that does not yellow. Textile softens the light, linen filters it while keeping the texture visible, glass lets it pass through frankly, wood and woven straw warm the tone. The choice is made on the light you want as much as on the decor.

Scandinavian wood lampshade and straw lampshade: what changes in the effect

Wood and woven straw stripe the output: the light comes out in fine, warm and slightly graphic lines. That suits a reading corner or an entrance, less a table where you write. Fabric versions and linen lampshades soften without drawing a pattern, and come closer to the plain white of white models.

How to change the fabric of a lampshade?

Remove the lampshade, take off the worn textile and use it as a pattern to cut the new cover. Glue or sew it onto the frame, leaving the top and bottom free so the air circulates and the light passes through. A metal lampshade, for its part, cannot be re-covered: it gets dusted.

Pendant lampshade, table lamp or floor lamp: which version to choose?

Start from the use: a pendant lights a table plan from the ceiling, a table lamp moves from one piece of furniture to another, a floor lamp lights near an armchair without taking up surface space. The format decides the place, the colour of the lampshade decides the mood. You then choose the fitting and the size of the diffuser.

How to hang a lampshade from the ceiling?

Fix the bracket to a solid point in the ceiling, then hang the light. Set the height above the table plan before tightening, and check that the cable does not pull on the fixing. A pendant lampshade goes above a table or an island, not in a passageway. See all lampshade shapes to gauge the volumes.

Floor lamp lampshade: what to check before buying

Check the stability of the base, the total height with the lampshade and the cable route to the socket. A floor lamp remains an indoor light, here with an IP20 protection rating: it is installed neither on a terrace nor in a bathroom. Current lines pair well with a slim metal base.

Where to place a scandinavian lampshade in the home?

On a bedside table for reading, on an entrance console to welcome, near an armchair for the reading corner, in a baby's room for a soft night light. Everywhere, it is an accent light: it completes the ceiling light without replacing it, and sits where you pause.

Living room lampshade: where to place it without cluttering

A console behind the sofa, a side table or a low shelf take the lamp without getting in the way of movement. To light a living room, a table lamp near the seat is better than a model in the centre of the room. White blends into a light wall.

Which lampshade for a bedside lamp?

A closed diffuser stops you meeting the bulb while lying on the bed, and frosted glass calms the output. As for format, the lamp should stay lower than the headboard. Bedroom lights favour small diameters and light tones.

Lampshade for a baby's room: which light to favour

Aim for indirect light, directed towards the wall or ceiling, and a bulb that stays out of reach from the bed. The lampshade must not get hot near hands or tip over easily. Lampshades for a baby's room are chosen low and stable.

How to install and care for a scandinavian lampshade?

Cut the power, screw the E14 bulb into the socket, place the lampshade on its support and tighten without forcing. Check that it does not touch the bulb and that it stands straight. For metal, a soft dry cloth is enough, no abrasive and no water near the socket. The selection is covered by a two year guarantee.

How to install a lampshade on its lamp?

The spherical white metal diffuser is fixed to the support provided by the manufacturer, then checked at a glance: no contact with the bulb, no play in the fixing. The power is only switched back on at the end.

How to clean a metal lampshade without damaging it?

Dust dry, from top to bottom, with a lint-free cloth. Avoid abrasive sponges and products that leave a film: on white steel, a mark shows. The base is cleaned the same way. Glass is washed with a damp sponge, then dried straight away.

Secure payment, tracked delivery, returns and Designix customer service: everything you need to see all Designix lights and order the lamp that matches your furniture.

How to match a scandinavian lampshade with the rest of the room?

Pick up a tone already present: the white of a sofa or a light wood console, or a black metal on a contrasting decor. The scandinavian style accepts mixes as long as the lines stay simple. Two strong materials are enough, a third scatters the eye and weighs down the whole.

Vintage scandinavian lampshade: which tones to avoid?

Stacking dark wood, brass and saturated colours breaks the lightness of white. If the room is already heavy with woodwork, keep the lampshade light and matt. Black tones work on a white wall or grey furniture, not on an already dark background. One contrast at a time.

High-end scandinavian sofa, wooden console, bench or shell chair: matching the tones

On a light high-end scandinavian sofa, the white lampshade settles effortlessly. A light wood scandinavian console calls for white metal or natural linen. A two-seater scandinavian bench or a shell chair are happy with a discreet echo: the lamp should not become the main piece of furniture.

To decide, measure the height available on the furniture, check the E14 fitting and choose the tone last. The rest will follow.

Frequently asked questions