Rope lampshades

Allow for a round lampshade 50 cm in diameter, made of braided rope on a metal frame, with an E27 socket, to cover a dining table without dazzling guests. The rope absorbs part of the light and lets it filter through the gaps: the result is warm and striped, and the bulb stays hidden.

What light does a braided rope lampshade give?

Braided rope does not diffuse light evenly: it absorbs part of it and lets it pass between the coils, which gives a warm, striped result that is never flat. Above a table, the bulb stays hidden at the eye level of seated guests.

A filtered light, striped by the gaps

The coils draw bright lines on the tablecloth and the nearby wall. The tighter the rope, the more the light is contained; the wider the spaces between coils, the more pronounced the pattern. Beige and cream warm the perceived tint without clearly colouring it as a coloured lampshade would. The result aims for atmosphere rather than performance: you install it for dining, not for reading a worktop.

What a natural rope lampshade changes above a table

A diameter of 50 cm covers a round table or a medium rectangular table and marks the centre of the room. The height of 19 cm covers the bulb while leaving the socket ring accessible: you change the bulb without removing the lampshade. To compare with other finishes, browse the lampshades designed for the living room and the guide lampshade, pendant and table lamp.

Where to install a rope lampshade in the home?

With 50 cm in diameter, this rope lampshade finds its place above a dining table, on a large corner floor lamp or a standing lamp. On a bedside lamp, a narrower format will fit better: measure the available diameter and height before ordering.

A rope lampshade for a floor lamp: which diameter?

A wide, stable base supports a 50 cm lampshade; a thin stem does not, the whole becomes visually heavy and unstable. Note the diameter of the original lampshade and the type of socket before replacing. The Bremen cream braided rope lampshade mounts on an existing E27 socket and measures 19 cm high.

A rope lampshade for a bedside lamp: is it suitable?

Rarely, except on a large bedside table: 50 cm overhangs a standard table and gets in the way. For a bedroom, look instead at the small diameters in the selection choosing a lampshade for the bedroom, and keep rope for the room where you sit. The rest of the catalogue can be discovered in all Designix lighting.

How to choose a rope lampshade: the criteria that matter

Three criteria decide: the diameter, which must match the base without overpowering it; the E27 socket, which determines the bulb; and the IP20 rating, which means use in dry interiors only. The height of 19 cm leaves the bulb covered and the socket accessible.

Jute, hemp or string: which fibres?

Jute gives a thick, matte fibre, hemp a finer and more regular weave, string a more rustic finish. All are braided on a metal frame, which holds the shape over time: it is the frame that prevents the lampshade from warping. The model in the collection mixes beige and cream rope with transparent threads.

Measure the diameter before ordering

Take the outside diameter of your current lampshade and the height between the socket and the bottom of the lampshade. A Ø 50 cm for 19 cm high corresponds to a spacious room, modern style, designed for the dining room. The selection is covered by a two-year warranty. The clean-lined models are grouped in our modern style models, and the light variant in the white colour version of the lampshade.

Secure payment, tracked delivery, returns and Designix customer service: once the diameter is checked, see the product page of the round 50 cm model to confirm the socket and height.

How to install a lampshade?

Switch off the power, remove the old lampshade by unscrewing the socket ring, then fit the new one and screw the ring back on by hand until it makes contact. The lampshade must remain stable without being tightened hard: excessive tightening cracks the socket or deforms the frame.

Mounting on an E27 socket

1. Cut the power at the circuit breaker.
2. Unscrew the socket ring and remove the old lampshade.
3. Fit the new lampshade onto the E27 socket.
4. Screw the ring back on by hand, without forcing.
5. Check stability, then restore the power.

Hanging a lampshade from the ceiling

A lampshade does not attach to the ceiling on its own: it mounts on the pendant socket, which carries the fixing. Check that this socket is E27 before buying. For any work on the electrical circuit, call a professional. The general step-by-step guide can be read in the complete lampshade guide.

How to care for and update a rope lampshade?

A rope lampshade is dusted dry, with a cloth or a vacuum cleaner with a soft brush. Water would warp the frame and dull the fibre. Rope cannot be replaced like stretched fabric: when the tint no longer pleases, you change the lampshade rather than the cover.

Dusting without water

Pass the cloth in the direction of the coils, without pressing, about once a month in a living room. Avoid household sprays: they leave rings on the fibre. An IP20 lampshade stays in dry interiors, away from water splashes.

Changing the fabric of a lampshade: what works on rope

On a fabric lampshade, the cover can be removed or re-glued onto the frame depending on its construction. On braided rope, the fibre is one with the metal frame: it cannot be swapped. If you are looking for that modularity, compare with replacing a lampshade with another material or a dark model in a black rope lampshade.

Rope, fabric, linen or glass lampshade: which to choose?

Braided rope structures the light and adds relief; fabric diffuses it more evenly; linen plays on a visible fibre; glass lets light through without filtering it. For a bedside lamp, glass gives more direct lighting, rope or fabric a more enveloping light.

Rope or fabric: two diffusions

Stretched fabric gives an even pool of light, without a pattern; rope lets the source show intermittently and marks the volumes. In the same room, choose one or the other: two nearby lampshades with very different diffusions compete with each other. Linen, for its part, keeps a visible weave and a matte feel, to be discovered in a linen lampshade with visible fibre. For a more even diffusion, see fabric lampshades, for a more even diffusion.

A glass lampshade for a bedside lamp

Glass suits the bedside because it filters almost nothing: the light falls on the book, without a striped halo. Rope, on the other hand, absorbs and softens, which better serves a room where you dine. The two families also coexist very well from one room to another: browsing the lighting catalogue gives the overview.

Braided rope in the home: where does this material find its place?

Braided rope dresses a lampshade as well as a wall light or a wooden chair seat, which creates a continuity of material from one room to another. In lighting, keep it in dry interiors: an IP20 lampshade withstands neither humidity nor sea spray.

A rope wall light in the hallway

A rope wall light has its own fixing system: a round 50 cm lampshade does not replace it, it mounts on an existing E27 socket. The point of repeating rope on the wall and ceiling is visual: the fibre links the light points without adding colour. For a child's room, prefer a soft model, such as those in the selection a soft lampshade for a baby's room.

Wooden chair and braided rope: consistency of materials

A wooden and braided rope seat, a lampshade of the same fibre: the room gains a unity that colour alone does not bring. Stick to two or three materials maximum in a dining room, otherwise the eye no longer knows where to rest. The beige and cream of the model match light woods and neutral walls, in a modern style lampshade spirit or in the softer atmosphere of the living room selection.

The choice comes down to three figures to note in your home: diameter of the base, available height, type of socket. With these three measurements in hand, see the product page of the round 50 cm model and order with confidence: secure payment, tracked delivery, possible returns and Designix customer service for any question before or after purchase.

Frequently asked questions about the rope lampshade