Recessed LED strips

This selection is also available in our French store: Rubans LED encastrables

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Recessed LED strips
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Set into an aluminium profile closed with an opal diffuser, the LED strip draws a continuous line of light, with no visible light points, in a niche, a false ceiling or a shelf. The choice comes down to three points: the support that holds the profile, the desired colour temperature and the protection rating required by the room.

What light does a recessed LED strip give in a room?

Set into a profile with a diffuser, the LED strip gives a continuous, even line, with no visible light points and no direct glare. The colour temperature sets the mood: 2700K to 3000K for warm light in a living room or bedroom, a more neutral white for a worktop or a hallway.

This collection contains a single recessed LED strip; its product page gives the exact specifications. The result depends on the profile as much as on the strip: the thicker the diffuser, the smoother the line, at the cost of a little power. A warm 2700K light suits rooms for rest, while 3000K LED strips keep a white bright enough for working.

Which recessed LED strip for each room and use
Room or use Desired result Colour temperature Protection to plan Point to watch
Living room Indirect line in a cornice or niche 2700K to 3000K, warm white Profile closed with a diffuser Source not visible from the seating
Kitchen, worktop Direct lighting under a wall unit 3000K, neutral white Closed profile, diffuser Steam and grease on the profile
Bedroom Soft halo at the headboard 2700K Slim profile, even diffusion No light in the line of sight
Bathroom Line around the mirror or in a niche 3000K Strip and connectors with a high protection rating Power supply outside the splash zone
Furniture and bookcase Shelf lighting 2700K to 3000K Profile recessed into the thickness Cable route to plan
Terrace, facade Step or line on the facade 2700K to 3000K Waterproof strip, draining profile Connectors protected from water

Recessed LED strip in plasterboard, ceiling or furniture: which support for which result?

The support decides the installation. In a plasterboard partition or false ceiling, a chase or niche is left before painting. In furniture, the strip sits in a groove or under a shelf. On a solid ceiling, a flush or surface-mounted profile avoids opening the slab.

Recessed LED strip in a plasterboard partition

The chase is marked out before the boards go up, at the width of the profile, and is closed with filler and then paint: the line becomes a glowing joint. Allow room for the cable and the power supply behind the board, otherwise everything has to be redone.

LED strip built into the ceiling

On a solid ceiling, a flat or angled profile is screwed to the surface and stays discreet thanks to its low height. This is the solution with no major work, to compare with the other all our light fittings when you are first looking for a central piece.

Recessed LED strip in wooden furniture

A groove the thickness of the profile in the shelf, or mounting under the shelf, is enough. The cable reaches the back of the unit through a drilled hole; the whole range of LED strips is chosen here in a flexible, low-profile version.

Recessing an LED strip according to the support
Support Provision to make Type of profile Fixing Finish
Plasterboard partition or false ceiling Chase or niche before painting Flush recessed profile Screws into the board or rail Filler then paint on the edges
Solid ceiling Groove or surface-mounted profile Flat or angled profile Anchors suited to the support Discreet cable cover or trunking
Furniture and wooden shelf Groove or mounting under the shelf Slim aluminium profile Adhesive or short screws Open edge for the light
Tiled wall Niche or recessed joint Narrow profile Glue or stainless steel screws Finishing joint
Outdoors Accessible and ventilated support Waterproof draining profile Stainless steel screws Connectors in a protected box

How to install a recessed LED strip without unpleasant surprises?

The order matters: choose the power supply and the profile, fix the profile, stick the strip, then clip on the diffuser. The strip is cut only at the marked points and is connected with a connector or by soldering. Access to the power supply and space for the dimmer are planned before closing up.

Prepare the power supply and the profile before installation

Add up the total length of the segments before ordering the power supply, and keep it ventilated in an accessible place. 24V low-voltage strips need a remote driver, whereas 220V light strips connect directly to the mains, with no transformer to house.

Fit the strip, clip on the diffuser and close up

The support must be dry, dust-free and degreased. Press along the whole length when sticking, check that it lights up before clipping on the diffuser, then close the niche or chase. A poorly chosen dimmer shows at switch-on: test before the finishing work.

Recessed LED strip in a bathroom or outdoors: what protection to plan?

Humidity requires a protected strip and a suitable profile, with the power supply placed outside the splash zones. Near a bath or shower, check the protection rating of the strip, the profile and the connectors, not just that of the strip. Outdoors, the profile must drain water and stay accessible for maintenance.

Recessed LED strip in the bathroom

Around a mirror or in a niche, moisture-protected versions limit deposits and splashes. The protection rating is read on the strip, but also on the connectors: water often gets in at the ends.

Recessed LED strip outdoors

On a facade or a step, a draining profile prevents standing water and the connectors stay in a closed box. For a pond, pond and pool lighting calls for installation by a professional, with equipment designed for immersion.

Replacing a recessed LED spotlight in the ceiling: how to switch to a recessed strip?

Remove the spotlight, then reuse the hole and the existing power supply when the cross-section allows, by recessing a profile that covers the cut-out. If the cut-out is too wide or the power supply unsuitable, a wider profile or a new opening solves the problem. Check dimmer compatibility before reconnecting.

Remove the spotlight and check the existing power supply

Switch off the circuit, take out the spotlight and note the wire cross-section and any transformer present. A recessed strip generally needs a continuous profile: measure the available length before choosing. Failing that, a ceiling light or an LED chandelier remains the solution with no cutting, to see in our indoor lighting.

Close neatly around the profile

The profile is fixed over the existing cut-out, then the gaps are filled with filler before painting. A powerful LED wall light, surface-mounted, is better suited when no work is possible: the result is more concentrated, but the continuous line disappears.

Cuttable LED strip: how does it work?

A cuttable strip has regular cut marks: cut only at that point, otherwise a whole segment stops working. After cutting, reconnect the power supply with a connector or by soldering on the marked pads. Measure before cutting and keep a margin at the corners.

Locate the cut mark

The marks divide the strip into successive segments: cutting between two marks keeps the rest working. Take the measurement on site, corners included, and allow a few centimetres of margin. For a changing colour, RGB colour-changing strips follow the same cutting logic.

Connect the strip after cutting

A clamp connector is enough for a straight join; soldering remains more reliable over long lengths. RGBW strips, white in addition to the colours, need a connection per channel, so a suitable connector. Check that it lights up before closing the profile.

How to maintain a recessed LED strip and avoid mistakes?

A profile closed with a diffuser protects the strip from dust: a dry dusting is enough, with no product on the strip. Common mistakes are an undersized profile that heats up, a strip stuck to a greasy surface and a connector left unprotected. A power supply suited to the total length and ventilated extends the service life.

Clean a profile and its diffuser

Dry or slightly damp cloth on the diffuser, never spray product onto the strip. In a kitchen, degrease the profile, not the strip. Strips designed for damp rooms cope better with repeated cleaning.

The mistakes that damage a recessed strip

A profile that is too narrow makes the strip heat up and dulls the light; a cable tie pulled too tight damages the tracks. Finally, a length added without recalculating the power supply causes a drop in brightness at the end of the line. A warm white result degrades quickly if the profile heats up.

Before fixing your line, check the profile cross-section and the chosen colour temperature on the product page. Browse all the light strips to build in to compare colour temperatures and profile cross-sections before fixing your line. For a modern kitchen, a recessed strip highlights the worktops, while an LED ceiling light illuminates the whole room; the choice depends on the surface to be lit.

Frequently asked questions about recessed LED strips

Recessed LED strip in plasterboard: how do you install it?

Mark out the line before the boards go up, cut a chase or niche to the width of the profile, then fix the profile to the rail or the board. The strip is then stuck into the profile and the diffuser clipped on. Filler and paint close the edges.

Recessed LED strip in furniture: which strip to choose?

Choose a flexible, low-profile strip that fits into a groove or under a shelf, with a slim profile and a diffuser to avoid glare. Favour warm light for a bookcase or a dresser, more neutral above a worktop.

Recessed LED strip in the bathroom: which protection rating?

Check the protection rating of the strip, but also that of the profile and the connectors, because humidity gets in at the ends and the connections. The power supply is placed outside the splash zones. A profile closed with a diffuser limits deposits and splashes on the strip.

Can a recessed LED spotlight be replaced by an LED strip?

Yes, if the existing cut-out and power supply are suitable: a recessed profile can cover the spotlight hole and take over the circuit. If not, a new opening or a wider profile is needed. Check dimmer compatibility before reconnecting.

LED ceiling lighting: recessed strip or LED ceiling light?

A recessed strip suits ambient or accent lighting, in an indirect line or along a niche. An LED ceiling light provides more direct general lighting from a central point. The two are often combined in a living room or kitchen, on separate circuits.

LED chandelier or recessed LED strip for a living room?

An LED chandelier structures the room and provides general light at the centre of the living room. The recessed strip, more discreet, highlights a cornice, a niche or a piece of furniture. Combining the two lets you vary the mood through the day, with direct and indirect lighting.

Powerful LED wall light or recessed strip to light a wall?

A powerful LED wall light concentrates light on one area and is surface-mounted, with no opening work. A recessed strip, on the other hand, needs a chase or a niche but gives a continuous line. The choice depends on the desired result and the stage of the work.

Our advice for choosing
The recessed LED strip fits into a profile to draw a line of light without showing the source: ceiling niche, plasterboard partition or furniture shelf. This collection brings together the strips and profiles to be built in, to be chosen according to the room and humidity.