Outdoor LED strips
This selection is also available in our French store: Rubans LED d exterieur
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
An outdoor LED strip lights draws a continuous line of light along a terrace, a facade or a pool, with no visible spotlight and no direct glare. The choice comes down to three points: water exposure, supply voltage and light colour.
- Choosing for a terrace or a facade
- IP protection rating
- 12V, 24V or 220V
- Cuttable strip
- White, RGB or RGBW
- Installation
- Maintenance
- Strip or other lighting
- Frequently asked questions
Which outdoor LED strip lights should you choose for a terrace or a facade?
For a covered terrace, choose a strip protected against damp, in warm white, with a low-voltage power supply suited to long runs. For an exposed facade, prefer reinforced protection and a power supply designed to stay sheltered if the transformer cannot be placed indoors. Then check the soffit, the window surround or the facade edge.
First locate the exact line to highlight: terrace edge, canopy soffit, window surround or facade edge. That location sets the protection rating, the voltage and the colour, well before looks come into it. A well-chosen strip disappears by day and stands out in the evening, when the line becomes continuous.
Outdoor LED strip lights for a terrace: what light for evenings?
On a terrace, the strip extends the living room outdoors. Mounted on a canopy soffit or a slab edge, it lights the ground without lighting faces. A warm white light, living-room style keeps plates and faces natural, whereas a white that is too cold hardens features and gives a car-park feel.
The three deciding criteria (location, IP rating, power supply)
Location first: covered, exposed to splashes or submerged. Protection rating next, then voltage, because it determines where the power supply unit is hidden. Colour comes last, once the practical constraints are settled. The rest is about rendering: rolls of LED strip are compared mainly on these three points.
What IP protection rating do outdoor LED strip lights need?
For a covered terrace, IP65 is enough against dust and water jets. On a facade battered by rain or at the edge of a pool, aim for IP68, designed for immersion. The rating is read on the roll label, never on the retailer's photo.
IP65 or IP68: which one for a covered terrace?
The first digit rates protection against dust, the second against water. IP65 means dust does not get in and a water jet does no damage: it is the right level under a canopy, a pergola or a roof overhang. The strip stays outside, but not in water.
Outdoor LED strip lights for a pool: what IP68 really allows
IP68 does not mean "free installation underwater": it indicates that the manufacturer has tested the module in immersion under its own conditions. Under a coping or along a pool deck, LED strips for pools and pool decks are chosen for that specific use, connectors included. Strips protected against water splashes cover simply exposed areas.
| Location | Exposure | IP rating to aim for | Type of strip |
|---|---|---|---|
| Canopy soffit, covered terrace | No direct rain | IP65 | Flexible waterproof strip |
| Facade, guardrail | Rain and dust | IP65 to IP68 | Reinforced waterproof strip |
| Pool edge, pool deck | Splashes and short immersion | IP68 | Pool strip |
| Pond, fountain | Prolonged immersion | IP68 | Pool strip |
| Pergola, hedge, garden path | Rain, damp, UV | IP65 minimum | Waterproof outdoor strip |
12V, 24V or 220V: what voltage for outdoor LED strip lights?
A 12V or 24V strip runs on a transformer placed in a sheltered spot, while a 220V strip connects directly to the mains. 24V handles long runs better, 220V avoids multiplying power supplies. The distance between the connection point and the strip often decides on its own.
24V outdoor LED strip lights: why they suit long runs
At low voltage, voltage drops as the cable gets longer: the end of the run dims if the power supply is too far away. 24V versions for long runs limit this effect across a whole facade or a terrace outline. What matters then: an accessible unit, out of water, and a cable gauge suited to the distance.
220V outdoor LED strip lights: what to plan for at the connection
With no transformer, an installation with no low-voltage unit simplifies the facade: nothing to hide, nothing to ventilate. In return, every junction must be waterproof, because 220V does not forgive damp on a bare connection. 220V strips without a transformer suit long uninterrupted runs.
| Voltage | Power supply | Where it goes | Point to watch |
|---|---|---|---|
| 12V | Transformer in a sheltered spot | Short outlines, small runs | Voltage drop over long lengths |
| 24V | Transformer in a sheltered spot | Long runs, several connections | Cable gauge to check |
| 220V | Direct connection to the mains | Facades, long spans | Waterproof junctions required |
Cuttable LED strip: how does it work?
A cuttable strip is cut only at the marks printed on the circuit, never in between. The end is then closed with a suitable cap to keep it waterproof. A cut outside the marks breaks the electrical continuity and leaves the following section unlit.
Where to cut outdoor LED strip lights and how to close the end?
Find the line, cut straight with a clean tool, close with the supplied cap, then test before fixing. Outside, an end left bare takes on damp and the module ends up flickering. This five-minute step saves taking down a whole run.
Can two lengths of outdoor LED strip lights be joined?
Yes, with a connector or a soldered joint, then protected with heat-shrink tubing or a waterproof box. Two points to watch: respect the polarity, and stay within the limits of the power supply in place. On a 24V low-voltage installation, a badly insulated joint is quickly spotted by flickering.
White, RGB or RGBW outdoor LED strip lights: what light for what mood?
A warm white at 2700K or 3000K suits terraces and evening meals, because it stays close to living-room light. An RGB strip changes colour at will for parties, and an RGBW adds a dedicated white, cleaner than the white obtained by mixing colours.
3000K outdoor LED strip lights: the shade to favour under a canopy
At 3000K, the light leans slightly golden: facade volumes read clearly, paths stay sharp, and the whole does not turn yellow. It is the 3000K shade for a terrace most often found in welcoming lighting. For a result even closer to a living room, go one step lower.
RGB outdoor LED strip lights: the uses that really work outside
RGB strips for evenings make sense on a pool, a feature wall or a guardrail: the colour underlines a line, it does not light a table. For everyday use mixing mood and clean white, versatile RGBW models avoid the bluish white of RGB mixes.
How to install outdoor LED strip lights without mistakes?
The strip is mounted on a clean, smooth, dry surface, or better, in an aluminium profile that protects it and diffuses the light. Connections and the transformer stay sheltered from water. Plan access to the transformer rather than gluing everything permanently.
What surface should outdoor LED strip lights be stuck to?
A damp, dusty or rough wall makes the adhesive peel off within weeks. Clean, let dry, and prefer an aluminium profile screwed to the surface when it is uneven. The profile also protects the silicone from UV and hail.
Where to place the transformer of low-voltage outdoor LED strip lights?
In a waterproof box, a utility room or under a canopy, within reach for maintenance. A transformer buried or lost in vegetation accumulates damp and heats poorly. This constraint often explains the choice of a 220V strip without a transformer on a facade that is hard to reach.
How to maintain outdoor LED strip lights so they last?
An outdoor strip is cleaned with clear water and a soft cloth, without abrasive products or a high-pressure jet. Check the connector seals and the condition of the silicone once a year. A flickering strip often signals damp ingress, not the end of its life.
Cleaning outdoor LED strip lights without damaging them
Leaves, dust and pollen dull the light: a wipe with a damp cloth in spring is enough. Avoid alcohol, solvents and pressure washers, which attack the coating and push water into the connectors.
Outdoor LED strip lights in winter: what really damages them
It is not the low temperatures that wear out a module, but freeze and thaw cycles on badly closed seals, plus prolonged UV exposure on low-grade silicone. A strip mounted in a closed profile gets through winter with no intervention. To compare protection levels, go back to the waterproof models for exposed outdoor use.
LED strip or other outdoor lighting: what to choose?
LED strip suits continuous lines: terrace edge, canopy soffit, pool outline. To light a passage or a specific point, a recessed spotlight or a wall light remains more suitable. The two are often combined, the strip for mood and the spotlight for safety.
LED strip or recessed spotlight for a terrace?
The strip underlines a boundary and guides without glare, the recessed spotlight lights a step or a staircase strongly. Count on both when the terrace is used in the evening: a low line for mood, two or three directed points for moving around. The rest of the full Designix catalogue helps complete the scene.
When to prefer an LED wall light to a strip?
A wall light marks an entrance, lights a door and reassures: the strip, for its part, fades away to draw. On an entrance facade, the wall light gives the landmark, the strip sharpens the edge. Both families live very well together in our outdoor lighting solutions.
To go further, browse all our light fittings and the LED strip range. Secure payment, tracked delivery, returns and Designix customer service: you order at the right time, and the line of light is ready before the warm season.
Frequently asked questions
Do outdoor LED strip lights need a transformer?
A 12V or 24V strip needs a transformer placed out of water, in a box or a utility room. A 220V strip connects directly to the mains. In both cases, exposed junctions must stay waterproof.
Can outdoor LED strip lights be installed near a pool?
Yes, provided you choose a model designed for that exposure and take care with the connections. The strip is mounted under the coping or along the deck, away from rubbing areas. The transformer stays away from the pool, in a dry place.
How many lumens for 5 metres of outdoor LED strip lights?
Data sheets generally give the flux per metre: multiply it by the strip length to get the total. Compare models on that basis rather than on wattage alone, because the result also depends on the colour and the diffuser.
White or RGB outdoor LED strip lights: what to choose?
Warm white 2700K or 3000K remains the most comfortable for everyday use and blends with indoor light. RGB is for evenings and changing decors. RGBW brings the two together with a dedicated white, cleaner than a reconstructed white.
How to maintain outdoor LED strip lights installed outside?
A soft cloth and a little clear water are enough; avoid abrasive products and the high-pressure jet. An annual check of the seals and silicone limits infiltration. Flickering often reveals a damp connector rather than a strip at the end of its life.





