Outdoor motion sensor floor lamps

This selection is also available in our French store: Lampes à poser d exterieur à détecteur de mouvement sur pied

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
Outdoor motion sensor floor lamps
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

Allow one light point per passage area, aimed at the path or the door, with a protection rating of at least IP44. A motion sensor outdoor post light switches on by itself when someone passes and goes off after an adjustable delay, with no switch to hunt for in the dark.

Which outdoor light has a motion sensor?

An outdoor light with a motion sensor is a fixture fitted with a passive infrared sensor that detects a person passing and switches the light on for a few moments. On a post, it is planted in a border or placed on a terrace, with no switch to operate in the dark.

Motion sensor outdoor post light: what the sensor triggers

The sensor compares the heat of the scene it faces. A body crossing its field changes this thermal image and triggers the light, then a delay switches it off. It cannot see through a hedge, a low wall or a window: the passage area must stay in its direct field. A complete fixture combines sensor, light source and power supply in a single body, whereas an add-on sensor is fitted to an existing light, with a less clean result on a stake. For indoor use, the references change, see the designer LED table lamps.

Motion sensor lights: battery or mains powered?

Mains power gives constant lighting but requires a cable to the post, to be planned before planting. Batteries and rechargeable batteries free you from any power supply and let you move the fixture with the seasons, with a runtime that cold and repeated triggering reduce. The built-in solar panel recharges on its own, provided it is exposed. The rest of the full lighting range follows the same logic of light source.

How does a motion sensor work on a garden post light?

The sensor continuously compares the heat of the scene it faces. When a body warmer than the background crosses its field, it closes the contact and switches the light on, then cuts it after an adjustable delay. A twilight cell prevents switching on in broad daylight.

Range, detection angle and delay: the three settings to understand

The range defines the distance at which a passer-by is detected, the angle opens the field in front of the light more or less, the delay sets the on time after the last movement. Set the range to the real width of the passage: too wide, the neighbour's cat triggers it, too short, you walk forward in the dark. These settings are also found on adjustable models used to frame a worktop.

Why does the sensor trigger with no one passing?

Foliage swept by the wind, an animal, sunlight reflecting on a window, a heat source in the field: the sensor reacts to a temperature change, not to a silhouette. Re-aim the light or lower the sensitivity before concluding there is a fault. The same phenomenon occurs indoors with metal lamps fitted with proximity sensors.

How do you wire several lights to a single power supply?

Run a single line from the consumer unit or an outdoor socket, then distribute in a waterproof junction box: each light runs in parallel, never in series. The number of points depends on the total power supported by the circuit, validated by an electrician.

Waterproof junction box: the starting point of the installation

The supply enters it, the outgoing lines to each light leave it. Label each conductor, tighten one cable gland per sheath and close the lid properly. Any work is done with the power off, and the number of outgoing lines is validated with a professional before drilling.

Battery-powered motion sensor lights: the cable-free solution

Stake planted, sensor aimed, nothing else: the installation takes a few minutes and needs no connection. This is the answer for a distant border, a rented garden or a terrace without a socket. The trade-off is runtime, which drops with cold and frequent switching.

Mains, battery or solar: which power supply for outdoors?
Power supply What it involves at installation Best suited to Limitation to know
Mains (230 V connection) A cable must reach the post, to be planned before planting House entrance, covered terrace, path served by an electrical point Requires a waterproof junction box and careful installation
Batteries or rechargeable battery No cable: the fixture can be moved and replaced easily Border, garden corner far from any socket, rented home Runtime depends on the batteries, which cold and repeated triggering reduce
Built-in solar panel The fixture recharges on its own in daylight Well-exposed path, stake in full sun Gives less in winter or in the shade of a wall or tree

Where should you install a motion sensor outdoor post light?

Where someone passes and the ground stays usable: path edge, stairway, terrace corner, near a door. The sensor must face the passage area without being hidden by a border or a low wall, and the fixture must stay out of areas with water jets.

Entrance, garden path and terrace: three installations that work

On a path, place the light at the edge, sensor turned towards the path and not towards the street, to avoid triggering on passers-by. Near a door, set it back a few steps so the visitor arrives already lit. On a terrace, aim at the corner and not at the seats, otherwise the light comes on with every movement at the table. A black finish is less noticeable in dense foliage than a pale body.

Check the ground before planting the stake

Loose soil, gravel, slab: the surface decides the fixing. A slab requires a weighted base, heavy soil a stake driven in deep and straight. Keep the light away from watering pipes and buried ducts before driving anything in.

Which model for which location
Location Mounting support Protection rating to aim for What to check first
Entrance and front door Ground stake or weighted base IP44 or higher Sensor aimed at the passage area
Garden path Stake planted in the ground IP44 or IP54 Sensor height and vegetation that may hide it
Covered terrace Base or low wall fixing IP44 under cover No obstacle between the sensor and the seats
Poolside or watered area Stake at the edge, out of direct spray IP65 Watertightness of the body and the connection

Which IP protection rating should you choose for an outdoor post light?

An IP44 rating is enough under a canopy or a covered terrace, as it resists splashes. On a path exposed to wind and rain, aim for IP54; poolside or in a watered area, IP65. The second digit concerns water, the first solids.

IP44, IP54, IP65: reading the two digits

The first digit rates protection against solids: 4 for objects over 1 mm, 5 for limited amounts of dust, 6 for dust-tightness. The second rates water: 4 for splashes from all directions, 5 for jets. An IP65 rating with an incorrectly fitted seal protects nothing, hence the importance of the installation. Designer table lamps for the living room do not have this constraint, stick to indoor use.

Sheltered, exposed or watered: three situations, three requirements

A terrace under a canopy receives side splashes, IP44 is enough there. A stake in full wind receives rain and dust, move up to IP54. Poolside or near a sprinkler, aim for IP65 and keep the connection out of the direct jet. The lighting catalogue details these uses by family.

Post light or lamp post: what is the difference outdoors?

Both terms refer to a light that stands upright without being fixed to the wall. Outdoors, the nuance lies in the support: a post light is planted on a stake or placed on a base, while a lamp post rests on a taller stem. Stability in the wind decides the choice.

Battery-powered motion sensor lights: the most mobile format

With no cable, the fixture moves when the vegetation grows or when a new passage area appears. You move it to mow, you bring it in out of season. Above all, check that the stake stays straight once planted, because a badly balanced wind catch tips the whole thing over.

Original post light: stake, base or tall stem

The stake is planted in a border and moves with the seasons. The weighted base sits on a terrace or gravel, without making a hole. The tall stem brings the source closer to eye level and lights a wider area, but catches more wind. For indoors, compare with the modern living room selection and its Scandinavian style.

What is the best post light for outdoor use?

The one whose sensor covers the area to be lit, whose protection rating matches the real exposure and whose power supply is possible at your home. A model that is stable in the wind and whose delay is adjustable gives better service than a brighter model that is badly aimed.

Three criteria that matter, three you can ignore

What matters is the coverage of the passage, the IP rating and the stability of the post. You can ignore the advertised number of light sources, the fashionable design and the colour of the body, unless the light must blend into a pale wall. Ceramic pieces remind us that a beautiful body never replaces good adjustment, and the wood design version illustrates the same principle indoors.

Mistakes to avoid: hidden sensor, light in the eyes, overestimated range

A sensor behind a border detects nothing, even when well set. A source aimed at the visitor dazzles and makes it hard to read the path: aim at the ground. Finally, do not assume the range before testing at night, on foot, along the whole length of the passage. A linen shade would filter the light, which makes no sense outside.

How do you maintain and adjust an outdoor motion sensor light?

Cleaning the sensor lens and the glass with clear water, without solvent, is enough to avoid false triggering. Over the seasons, re-aim the sensor when the vegetation grows and adjust the delay. On a battery model, replacing the batteries often explains a drop in range.

Clean the sensor without damaging the lens

Switch off the power, then wipe the lens and the glass with a soft damp cloth. No alcohol or abrasive on the lens: it scratches and detection becomes erratic. Take the opportunity to remove leaves and spider webs around the body, which also disturb the field. LED lamps for the bedroom are cleaned the same way, dry.

Adjust sensitivity and delay over the seasons

In spring, new vegetation triggers it: lower the sensitivity or move the light. In summer, shorten the delay to avoid continuous switching with every pass. In autumn, check that the twilight cell still activates early enough and change the batteries before winter. For a workstation, desk lamps and the LED versions for the office need the same regular maintenance.

Secure payment, tracked delivery, returns and Designix customer service accompany every order. First choose the location and the support, then browse the light that suits each room and each outdoor area.

Frequently asked questions

Can you install an outdoor motion sensor light without an electrician?

Yes, if the model runs on batteries or a solar panel: there is no connection to the grid, only a fixing to screw or a stake to plant. A light to be connected to 230 V, however, requires a power supply and a waterproof junction box.

Battery-powered motion sensor lights: is the light enough?

To light a passage, a staircase or a door for the duration of the trip, a battery light is enough. To bathe a whole terrace in light, a mains connection remains more constant. The drop in brightness often comes from the state of the batteries.

Does the sensor work behind a window or under a canopy?

A passive infrared sensor picks up the heat of a moving body: a window or a partition between the sensor and the passage area blocks detection. Under a canopy, aim it outwards, avoiding rain or swept foliage triggering it.

Does a solar sensor light stay on all night?

No: detection mode switches on briefly with each pass, while continuous lighting uses up the reserve accumulated during the day. The exposure of the panel therefore matters more than the size of the light, especially in winter or in the shade of a wall.

Do you need a switch for a post light with a sensor?

No: the sensor plays that role, switching on when someone passes and then off after an adjustable delay. A switch remains useful to cut the power out of season or during maintenance. On a battery model, the switch is mainly used to save the battery.

Our advice for choosing
Outdoor post lights with motion sensors are installed on a patio, along a path or near an entrance. The light switches on as you pass and turns off by itself: here is how to choose the size, power supply and ingress protection rating.