Designer recessed spotlights
This selection is also available in our French store: Spots encastrables design
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right light output?
At what height should the light be installed?
What type of bulb?
Compatible with LEDs and dimmers?

Light changes everything
From statement chandeliers to discreet wall lights, we help you choose the right brightness, height and style for every room.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Start with the beam: wide and diffuse to light a whole room, tighter to target a worktop or a wall. A designer downlight leaves only a trim visible at the ceiling, the source lights downwards and the ceiling stays clean. Fixed or adjustable, white, black or gold, it is chosen according to the light you want and the finish of the other lights in the room.
What is a designer downlight and what light does it give?
A designer downlight is a light that sits flush in the ceiling: only a trim shows, the source lights downwards. Depending on the model, the beam is wide and diffuse to light a room, or tighter to highlight a wall, a worktop or an object.
What does a designer LED downlight bring?
Recessed, the light disappears into the ceiling: no visible housing, no exposed cable, and light that falls exactly where you want it. A designer LED downlight adds a source that gives off little heat and can be forgotten for years. Two uses emerge. General lighting spreads several points in a regular grid and replaces a central ceiling light. Accent lighting concentrates one or two points on a bookshelf, a picture or a worktop, and that is where the trim becomes a decorative detail in its own right.
Designer recessed ceiling LED downlights: what the grid changes
A regular grid gives even light, with no dark zone between two points. Too tight, it overlights and tires the eye; too wide, it leaves black holes in the ceiling. The general rule is to keep a constant spacing between points and align it with the lines of the room, wall, island, furniture. To widen the choice to the rest of the house, browse our full range of lights and the selection of designer downlights for the whole home.
Fixed or adjustable designer downlight: which to choose?
A fixed downlight throws its light straight down: ideal in a regular grid to light a whole room. An adjustable downlight pivots and tilts, which lets you aim at a wall, a bookshelf or a worktop without multiplying light points.
| Criterion | Fixed downlight | Adjustable downlight |
|---|---|---|
| Direction of light | Straight down | Adjustable pivot and tilt |
| Main use | General lighting in a regular grid | Accent lighting on a wall, a worktop or an object |
| Effect on the ceiling | Discreet, regular grid | Points aimed in different directions |
| When to choose it | Room to be lit evenly | Precise area to highlight |
When to choose an adjustable recessed downlight in a living room?
As soon as an element deserves to be lit for itself: a shelf, a picture, a fireplace mantel, a reading corner. The swivel lets you correct the angle after installation, which avoids drilling again if the result is not right. In a living room, a discreet fixed grid is often combined with two adjustable points aimed at the back wall. Adjustable downlights to tilt cover this use, and an adjustable downlight with a strong style can become a real decorative detail.
Where does a fixed downlight remain the best choice?
In circulation areas, long corridors, hallways and under a low ceiling: the light goes down and nothing moves. A fixed one often costs less and installs faster, with no setting to redo. It is also the simplest format to align when you want a perfectly regular grid, visible from the sofa. For a sober and durable source, take a look at the LED models in a designer style.
Black, white or gold designer downlight: which colour for the ceiling?
A white downlight blends into a light painted ceiling and stays discreet. A black downlight deliberately draws marked points, which works on a dark ceiling or in a strongly styled interior. Gold plays the decorative accent alongside handles and lights.
White or black: the downlight blends in or shows off
On a white ceiling, a white downlight becomes almost invisible: the eye only stops on the light. A black downlight does the opposite, it accepts the presence of the light and structures the ceiling like a pattern. This second choice requires consistency: switches, profiles, taps and lights benefit from following the same shade. Matt white finishes suit sober interiors, matt black versions suit rooms where the ceiling plays a part in the style.
What does a gold designer downlight change?
Gold brings a warm touch, in small numbers, to an already styled room: it responds to furniture handles, taps, a pendant light. Repeated too much on the ceiling, it becomes talkative. Count one or two gold accents in a room, not a full grid. Bare metal gives a cleaner, more technical look, useful in a kitchen. Find the downlights in a gold colour and the metal downlights according to the effect you want.
LED or halogen: which source for a designer downlight?
An LED bulb lights while consuming significantly less electricity than a halogen and gives off little heat, which makes it more durable in daily use. Halogen remains appreciated for its immediate warm light and its rendering, especially when an existing designer halogen downlight has to be replaced identically.
Can a designer halogen downlight be replaced by an LED?
Yes, provided the base and the power supply are respected: a GU10 downlight is replaced by a GU10 bulb, a GU5.3 base requires checking the existing transformer, which does not always accept an LED. The colour temperature is chosen too: count around 2700 to 3000 K for a warm and cosy light, 4000 K for a more neutral white in a kitchen or a garage, beyond that for a very cold rendering. Explore our Designix lighting catalogue and the black recessed LED downlights to align source and finish.
How to choose the colour temperature of a recessed downlight?
In a living room, stay in warm white: it is what makes materials and skin tones pleasant. In a kitchen or an office, a more neutral white helps you read and work. The classic trap is mixing temperatures in the same room: a warm grid on the ceiling and a cold lamp on the table show immediately. Keep one single temperature per zone, and note it down for your future replacement bulbs.
Where to install designer downlights: living room, kitchen, corridor?
In a living room, they replace a ceiling light with a discreet grid or light a wall. In a kitchen, they are placed above the worktop and circulation areas. In a corridor or a wet room, plan for a model whose protection rating suits humidity.
| Room | Recommended downlight type | Colour that works | Point to watch |
|---|---|---|---|
| Living room | Grid of fixed downlights, completed by adjustable ones aimed at a wall | Discreet white or graphic black | Avoid doubling the lighting with a central ceiling light |
| Kitchen | Downlights above the worktop and circulation areas | White or metal | Aim the beam at the work zones |
| Corridor | Regular alignment of fixed downlights | White or black | Keep a simple grid on a narrow ceiling |
| Bathroom and wet room | Downlights whose protection rating suits humidity | White or gold | Check the IP rating on the product sheet |
| Hallway and stairs | Adjustable downlights to guide the eye | Black or metal | Look for even light from one point to the next |
Recessed downlights for a living room: which grid and which beam?
A living room is treated in two layers: a regular grid for general light, then one or two points aimed at a wall or a bookshelf. Avoid stacking this grid with a central ceiling light, the effect becomes flat. The number depends on the surface, the ceiling height and the beam width; it is better to lay the points out on the floor with markers, then adjust. See recessed lighting for a living room.
Recessed downlights for a kitchen: where to place the light?
The priority goes to the worktop: one point above each useful zone, sink, hob, preparation. The rest of the room is covered by a wider grid. A tight beam on the worktop avoids shadows cast by your own body when you cook. In a narrow corridor, a simple alignment of fixed downlights is enough. Discover the downlights designed for the kitchen and the solutions to light a corridor.
How to install a designer downlight in a ceiling?
Installation requires three checks: the cut-out matching the downlight diameter, the depth available above the ceiling to house the housing, and the existing power supply. A plasterboard ceiling is cut with a hole saw; a solid ceiling is worked with the right core drill.
Which cut-out and which depth to plan for a recessed downlight?
The cut-out diameter is the measurement to respect in the ceiling: it appears on the product sheet and must match the hole saw used. The recess depth matters just as much, because the housing and the socket must fit between the board and the insulation. Before drilling, check what passes above: joist, duct, insulating wool. On a concrete ceiling or a false ceiling that is too thin, a surface downlight screws directly on and avoids a large cut-out.
Do you need a dimmable recessed downlight?
Only if you want to adjust the intensity: not all downlights and not all bulbs are compatible, and the information appears on the product sheet. If you go for this comfort, choose from the start a downlight and a dimmer designed to work together, otherwise flickering or buzzing appears. The models compatible with a dimmer are easy to spot in the selection.
How to match designer downlights with the decor of the room?
Everything is played out on the trim and the material: a discreet white lets the ceiling colour dominate, a black or a gold becomes an accepted detail, and a metal downlight matches the handles, profiles or lights already in the room.
How to combine recessed downlights and a pendant light above a table?
The pendant light lights the table, the downlights light the room: the two must not fight. Keep the pendant low and warm, then set the recessed grid more discreet for the rest of the volume. The same principle applies in an open kitchen, where the LED lighting of the worktop stays independent from the living room light. If you are lighting a covered terrace, also look at the recessed outdoor downlights.
Which designer downlight in a bathroom?
In a wet room, the protection rating decides: it is an IP rating shown on the product sheet, which allows or forbids use near the bathtub, the shower or the sink. Beyond safety, aim at a mirror or a wall to avoid light in the eyes, and stay on a warm white. An adjustable point in front of the mirror makes the place easier to live in daily.
How to maintain and adjust your designer downlights?
A recessed downlight is dusted with the trim switched off using a soft cloth, and the bulb is replaced without dismantling the ceiling. Adjust the orientation and the distribution of the beams once everything is installed, then check that the dimmer really controls the lighting and that the light stays even from one point to the next. Cleaning twice a year is enough to preserve the look of the trim.
Your order is protected by secure payment and shipped with tracked delivery, with returns possible if the finish does not suit the ceiling. The Designix customer service remains available to check a cut-out diameter or a dimmer compatibility before purchase. To equip another room, compare the LED solutions for the living room, then start your selection.
Frequently asked questions about designer downlights
Designer LED or halogen downlight: which to choose?
LED consumes much less electricity than halogen for comparable lighting and gives off little heat, which makes it more durable in daily use. Halogen gives an immediate warm light and remains useful to replace an existing designer halogen downlight identically, provided the same base is kept.
Which black designer downlight to choose for a white ceiling?
On a white ceiling, a black downlight deliberately creates graphic points: it is a decorative choice, not a concealment. It is reserved for rooms where the ceiling plays a part in the style, or matched with black switches, profiles and taps.
Can designer recessed ceiling LED downlights be installed in a damp room?
Yes, provided a model is chosen whose protection rating suits humidity and splashes: it is this IP rating, shown on the product sheet, that allows use in a bathroom, under a canopy or in a wet room.
How to choose the cut-out diameter of a designer downlight?
The cut-out diameter is the measurement to respect in the ceiling: it appears on the downlight sheet and must match the hole saw used. Also check the recess depth available above the ceiling to house the housing before drilling.
How many designer downlights should be planned for a living room?
The number depends on the surface, the ceiling height and the beam width. Start from a regular grid for general lighting, then add points aimed at a wall or a bookshelf. It is better to adjust after a floor test, with markers laid before drilling.





