Motion sensor LED strips
This selection is also available in our French store: Rubans LED à détecteur de mouvement
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
A LED strip with a motion sensor switches on when you walk past and turns off by itself, with no switch to hunt for in the dark. To choose one well, look at three things in this order: whether there is a socket nearby, exposure to damp, and the light colour you want.
What is a LED strip with a motion sensor, and how does it work?
It is a flexible LED strip paired with a sensor: an infrared cell detects movement, a light-level cell waits until it is dark, and the strip switches on by itself, then off after an adjustable delay. There are two families: models wired to the mains and self-contained models.
An infrared sensor combined with a light-level cell
The detector does not react to light but to heat in motion: so it must face the area you walk through, not sit behind a door or a post. The light-level cell prevents it switching on in broad daylight. A potentiometer sets the sensitivity and the lighting duration; adjust it once the strip is in place, walking past to check the trigger. Set the delay short for a corridor you pass through, longer for a staircase.
Self-contained strip or mains-wired strip
220 V LED strips wired to the mains allow continuous operation and are controlled on their own. 24 V low-voltage strips need a transformer, which means planning a spot for the box, often underneath or beside the unit. Self-contained models, battery-powered or rechargeable, stick anywhere, including in a cupboard with no electricity.
Where should you install a LED strip with a motion sensor in the home?
The places that benefit from lighting themselves are the ones you cross with your hands full: steps, corridor, dressing area, under kitchen units, cupboards and headboards. The rule fits in one line: the strip lights the walkway, never into your eyes, and the sensor points towards where you arrive.
| Room | Where to stick the strip | What triggers it | Point to watch |
|---|---|---|---|
| Staircase | Under the stair nosing or on the skirting | Movement | Sensor facing the top of the steps |
| Corridor | Skirting or upper wall | Movement | Do not aim at a window |
| Dressing area, cupboard | Inside, on the hinge side | Opening or movement | Battery strip if there is no socket |
| Kitchen | Under the wall units | Movement in front of the worktop | Light that does not shine back into your eyes |
| Living room | Alcove, bookcase, headboard | Movement or darkness | Keep it as accent lighting |
| Outdoors | Under an eaves overhang | Movement | Ingress protection suited to rain |
Which LED strip with a motion sensor should you choose for a staircase?
You want a strip that lights up from the first step and switches off after you have passed: a flexible strip under the stair nosing or on the skirting, a power supply nearby, a sensor facing the top of the steps. The dual-detector version prevents it switching off halfway up.
Under the stair nosing or on the skirting
Under the stair nosing, the light grazes the next step and outlines the flight without dazzling: it gives the cleanest result. On the skirting, installation is simpler and the cable hides behind the moulding, but the light illuminates the step itself less. In both cases, the strip sticks to a dry, dust-free surface, and the end connects on the wall side, where the power supply stays accessible. A warm white, around 2700 to 3000 K, avoids the hospital-ramp effect; 3000 K strips are a good compromise between comfort and legibility.
Why dual detection changes comfort
A single sensor placed at the bottom lets the strip switch off if the climb lasts longer than the delay. With two sensors, one at the top and one at the bottom, the light triggers as soon as you approach from either side. You still need to set the duration long enough to cover the whole route.
How do you power a LED strip with a motion sensor: battery, rechargeable or 220 V?
Three solutions. Mains power, the most durable when a socket or a cable outlet exists; batteries, for a cupboard or drawer with no power; rechargeable, which installs without wiring and is recharged periodically. The choice depends on whether there is a socket and how often it lights up.
| Family | What it involves | Where it is useful | What to check |
|---|---|---|---|
| 220 V mains | Fixed installation, cable to the strip | Staircase, corridor, kitchen | Existing socket, space for the transformer |
| Battery | No wiring, batteries to change | Cupboard, drawer, dressing area | Battery size, access for changing them |
| Rechargeable | Installs anywhere, recharges | Unit with no socket, headboard | Charging time, mounting method |
| Solar | Depends on sunlight received | Outdoors, terrace | Actual exposure, ingress protection |
For a corridor lit several times a day, a mains-wired LED strip avoids regularly replacing batteries. Conversely, in a cupboard opened twice a week, battery life is not an issue.
Outdoor LED strip with a motion sensor: what should you check before buying?
Outside, three points decide: the ingress protection rating, which must match exposure to rain; the power method, mains or solar; and the sensor range, set so it does not trigger when a cat walks past. Solar models depend on how much sun the facade gets.
Read the ingress protection rating before the spec sheet
An IP20, as on an indoor light, withstands neither rain nor condensation. For use sheltered under a canopy, a mid-range rating is enough; for an exposed wall, you need to go higher. Waterproof strips for damp rooms cover this need, and strips designed for swimming pools meet an even stricter specification. Never assume immersion: it is stated in the manufacturer's data sheet.
Mains or solar: what that changes on installation
Solar removes the cable, but depends on a well-exposed panel: a north-facing or shaded facade recharges poorly and lighting time shrinks. Mains power remains more consistent if a conduit already exists. In both cases, set the sensitivity towards the lower end of the walkway to limit false triggers.
LED strip, ceiling light, wall light or chandelier: which lighting for the living room and kitchen?
The sensor strip handles walkways, not living light. For a living room, a LED ceiling light or a chandelier provides general lighting, a wall light illuminates a reading corner, and the strip highlights an alcove or a unit. In the kitchen, a ceiling light complements the strip under the wall units.
What the strip does well, and what it does not
It excels on a short line, a step, a worktop, the back of a bookcase. It does not replace a central source: installed alone on the ceiling, it gives grazing light and marked shadows. To light a whole room, look to the home lighting range.
Complementing with a ceiling light, a wall light or a chandelier
A living room LED ceiling light is chosen according to the room's surface area and ceiling height; a modern kitchen ceiling light favours a neutral white for food preparation. A powerful wall light handles the sofa corner, a LED chandelier structures a dining room. Changing a recessed LED spotlight in the ceiling needs no new cable: note the cut-out diameter and the module voltage before ordering. These markers can be found in our Designix lighting selection.
Cuttable LED strip: how does it work?
A cuttable strip has regular cutting marks. Cut only on these marks, with scissors, never at random between two LEDs, otherwise part of the circuit will no longer light. Cutting shortens the strip but changes neither its voltage nor its original power supply. Finally, the end connects with a suitable connector. RGB strips with variable colour and RGBW models, white and colours follow the same rule: cutting mark, connector, unchanged power supply. If you are hesitating between fixed white and colour, note that the motion sensor is mainly used in white; variable colour adds atmosphere, not legibility.
LED strip or pendant light above a table: which should you choose?
A strip lights a line, a worktop or a step; it does not replace a central source above a table. For a meal, a low pendant light and a warm white between 2700 and 3500 K give a different comfort, including in a living room or an open kitchen.
The Bandeaula pendant light, metal and glass
The Bandeaula pendant light, metal and glass combines a horizontal flat bar in black and gold metal with a warm white LED from 2700 to 3500 K, 20 W, IP20. Its dimensions: length 12 cm, depth 93 cm, height adjustable from 18 to 312 cm. It is intended for the living room, dining room and kitchen, and comes with a 5-year warranty. The long, low bar suits rectangular tables; the height adjusts to keep the view clear between guests.
Two lights that complement each other
Keep the sensor strip for the walkway to the kitchen or staircase, and the pendant light for the table. 2700 K strips, warmer match their tone to that of the pendant light. For a facade or an exposed wall, choose a high ingress protection rating rather than an indoor model.
View the black and gold pendant light
- Secure payment
- Tracked delivery
- Returns
- Designix customer service
To equip a staircase or a corridor, browse all LED strips and compare light temperatures before settling on your choice.
Frequently asked questions
Cuttable LED strip: how does it work?
The strip has printed marks at regular intervals: cut only on these lines, with scissors, never in the middle of a group of LEDs. After cutting, the remaining end connects with a suitable connector; the removed portion cannot be reused on the same power supply.
Can you install a LED strip with a motion sensor without wires?
Yes: battery-powered or rechargeable models stick on without running a cable, which suits a cupboard, a drawer or a unit with no socket. You then have to accept changing the batteries or recharging the strip, and check that the sensor stays accessible for setting the delay.
Which LED strip with a motion sensor for a staircase?
A flexible strip stuck under the stair nosing or on the skirting, a sensor facing the top of the steps, and if possible dual detection so the light does not switch off during the climb. Mains power remains the simplest when a socket is nearby.
Is an outdoor LED strip with a solar motion sensor self-sufficient?
It works without wiring, but depends on sunlight: a poorly exposed panel recharges less and lighting time shrinks. Check before buying: the ingress protection rating against rain, the length of strip actually powered and the sensor range, set to avoid unnecessary triggers.
Which LED ceiling light should you choose for a living room?
A LED ceiling light provides general lighting: consider the room's surface area, the ceiling height, the light temperature and the desired result. A warm white around 2700 to 3500 K suits relaxing rooms; a powerful model is mainly justified in large rooms.





