LED neon flex

This selection is also available in our French store: LED néon flex

No products in this selection.

  • Tracked delivery to your country Tracked delivery
  • Secure payment at checkout Multiple payment methods
  • 14 days to change your mind 14-day returns
  • Secure payment Secure payment
Designix guides you

Not sure of your style? Find it in 30 seconds

A few questions, and we will show you the pieces made for you.

Frequently asked questions

How do I choose the right product?
Check the dimensions, materials and reviews on each product page; our team can advise you before you buy.
What are the delivery times?
The estimated date is shown in the cart and at checkout.
Can I return an item?
Yes, you have 14 days to change your mind.
Can I pay in instalments?
Depending on your country, instalment payment options may be offered at checkout.
LED neon flex
Designix · Design lighting

An interior that reflects who you are

Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.

  • Tracked delivery
  • Pay in instalments, where available
  • 14 days to change your mind
  • Advice & showroom in Lyon, France
Read our guide

First count the exact linear length to cover, then choose the voltage according to the distance between the socket and the installation point, and the protection rating according to the room. An LED neon flex is a light strip sheathed in silicone or PVC, flexible, that draws a continuous line of light on a wall, ceiling or piece of furniture, with no visible hot spots, and can be cut at the marks on the sheath.

What is an LED neon flex and what light does it give?

An LED neon flex is a light strip sheathed in silicone or PVC, flexible, that diffuses an even light along its whole length, with no visible hot spots. It is fixed to a wall, ceiling or piece of furniture, is cut at the marked points and comes in white or RGB.

Flexible neon LED: a strip that follows curves

The sheath bends by hand and follows the angle of a cabinet, the curve of a niche or the outline of a mirror. It is held in place with screwed clips, an aluminium profile or adhesive depending on the surface. A tight bend is formed slowly, without folding the strip at a right angle in the same spot.

Flexible neon LED: what the sheath changes on the diffuser

The silicone sheath stays flexible longer and withstands temperature variations better than PVC. It is what turns the light point into an even line: the internal diffuser spreads the light and removes the dotted effect visible on a bare LED strip. To replace an old glass neon, this continuous rendering avoids breakage and significantly lightens the profile. The rest of our full range of light fixtures is chosen on the same principle: a source, a rendering.

LED neon flex 12V or 230V: which power supply to choose?

12V and 24V require a remote power supply or transformer, often safer near a water area or in a small space. 230V connects directly to the mains over long lengths. The choice depends mainly on the distance between the socket and the installation point.

LED neon flex 12V: a remote power supply

Over a long length, the voltage drops at the end of the line and the line loses its brightness. The power supply unit is therefore placed as close as possible to the strip, in a dry and accessible place, never walled in behind a partition. Near a bathtub or a water cabinet, this low-voltage setup is reassuring, provided the unit stays out of reach of splashes.

LED neon flex 20m: connecting several segments

A 20 m reel is rarely run in one piece: it is cut and each section is re-powered. Plan one unit per zone rather than a single power supply at the far end, and keep each unit accessible for maintenance. The decision criterion comes down to two questions: what distance separates the socket from the strip, and will I be able to reach the unit in two years? For general room lighting, room-by-room LED solutions avoid this calculation.

Which protection rating for an LED neon: IP65 or IP67?

IP20 is suitable for dry indoor use, high up and out of contact. IP65 resists water splashes, which covers a bathroom or a sheltered terrace. IP67 withstands temporary immersion and is used outdoors in exposed areas. The rating appears on the sheath or the product sheet.

LED neon flex IP65: water splashes

Around a bathroom mirror or under a kitchen cabinet near the sink, this rating is enough to handle splashes and cleaning. It does not protect against a direct jet or a stay in water. Also check the rating of the power supply unit, often lower than that of the strip: it is what limits the actual use.

LED neon flex IP67: exposed outdoors

On a facade, a terrace edge or a gate, IP67 tolerates rain and brief immersion. It does not make the product waterproof for permanent underwater installation, and the connectors remain the weak point: each outdoor connection is protected with heat-shrink tubing or a dedicated box.

Understanding the protection ratings of LED neon
Rating What it tolerates Where to install it What to avoid
IP20 Dry air, no contact with water Ceiling, cabinet, indoor niche Bathroom, outdoors, kitchen near the sink
IP65 Water splashes and dust Bathroom, covered terrace Immersion and direct jet
IP67 Temporary immersion Exposed outdoors, pool edge Permanent underwater installation

LED neon flex RGB or white: which light for which atmosphere?

Warm white creates a soft atmosphere in a living room or bedroom, neutral white lights a worktop, cool white is reserved for technical areas. RGB changes colour and intensity by remote control or app, for decorative rather than functional light.

LED neon flex RGB: colour as decoration

RGB is used to highlight a shape and change the atmosphere of a living room or bedroom, not to read or work. Its remote control manages the hue and intensity; the app does the same from a phone. The white obtained by mixing colours is less clean than a true white: for daily use, a dedicated white strip is better.

Warm, neutral or cool white LED neon: choosing the shade

In general, warm white sits around 2700 to 3000 K, neutral around 4000 K and cool above 5000 K. A bedroom and a living room work better in warm, a kitchen or office in neutral. If you want to lower the intensity in the evening, compare with dimmable ceiling lights to match the two sources.

Which diameter and length of LED neon flex to choose?

A thin diameter draws a discreet line, a wider diameter gives a brighter and more visible line. Lengths are chosen according to the linear length to cover, a wall, a niche or an entire ceiling, and are connected to each other with the connectors provided by the manufacturer.

LED neon flex 6mm: the most discreet line

This section slips into a moulding, a cabinet groove or a niche corner, where it is barely visible when off. The line is thin and the perceived light softer: reserve it for outlines and sideboards, not for circulation lighting. An 8 mm diameter marks the design more and holds better on a bare wall.

Neon LED tube 120 cm and LED neon 150 cm: segments ready to install

A neon LED tube 120 cm or an LED neon 150 cm avoids cutting when the linear length fits exactly, for example above a worktop or along a shelf. These straight segments are installed aligned, while the reel strip remains the solution for curves and custom lengths. In both cases, measure before ordering and allow for the connectors.

Where to install a flexible LED neon in the home?

It is installed as a line of light behind a living room cabinet, around a bedroom ceiling, under the wall cabinets of a kitchen, in a hallway or above a desk. Each room requires its own white colour, its IP rating and its fixing method.

Which LED neon flex for which room
Room Desired effect White colour Recommended rating Point of vigilance
Living room Line behind a cabinet or a moulding Warm white IP20 Hide the power supply behind the cabinet
Bedroom Soft ceiling outline, without glare Warm white IP20 Avoid running it in line with the bed
Kitchen Highlighting the wall cabinets Neutral white IP20 or IP65 near the sink Protect the cooking area
Hallway Guiding line towards the doors Warm white IP20 Check the length before cutting
Office Sideboard behind the screen Neutral white IP20 Install out of direct sight
Bathroom Mirror outline Neutral or warm white IP65 minimum Power supply outside the water zone

LED bedroom: an outline that does not glare

In a bedroom, the line is installed in a cornice, behind the headboard or along a side wall, never facing the sleeper. Warm white and low intensity are enough. For the central light point, complete with bedroom ceiling lights and, if the wall lacks relief, one of the bedroom wall lights.

LED ceiling lighting: the indirect line

A strip slipped around the ceiling sends light upwards and lights the room without a visible source, which replaces part of the general lighting. In the kitchen, the same line under the wall cabinets lights the worktop and pairs with kitchen pendant lights. In a hallway, it guides towards the doors when hallway light points lack space.

How to install, cut and maintain a flexible LED neon?

The strip is cut only at the marked points, then connected with a connector or a solder joint. It is fixed with clips, an aluminium profile or adhesive depending on the surface, and is cleaned with a soft cloth, with the power off, without abrasive products.

Cuttable LED strip: how it works

The lines printed along the sheath indicate the only permitted cutting points. The detached portion remains usable if connected to a connector or a power supply; otherwise it no longer lights up. Check the voltage before reconnecting and test the section before fixing it permanently.

Changing a recessed LED spotlight in the ceiling

Switch off the circuit, unclip the spotlight from its housing using its springs, disconnect the connector, then fit a model with the same cut-out diameter and the same voltage. This applies to recessed LED spotlights, not the strip, but the two often coexist in the same renovation.

Three mistakes come up repeatedly: an undersized power supply that makes the line flicker, a forced bend that breaks the strip inside the sheath, and a forgotten IP rating on the unit while the strip is protected. Add a fourth: a reel still wound up left switched on, which heats up in the centre.

LED neon flex or LED light fixture: ceiling light, wall light or chandelier?

The flex neon highlights a shape and creates an atmosphere, while an LED ceiling light lights an entire room, an LED wall light lights a wall or a passage and an LED chandelier becomes the central point of a living room. The two complement each other more than they replace each other.

LED ceiling light: lighting the entire room

A neon line does not replace a general source: it highlights it. For a living room, a powerful or modern ceiling light covers the surface when the strip only accentuates a relief. Compare LED ceiling lights, models designed for a living room, modern shapes, kitchen lighting or a office ceiling light depending on the room. An LED wall light completes the bare wall.

LED chandelier: structuring the centre of the living room

Above a table or in the centre of a living area, an LED chandelier provides the focal point that neon cannot carry. It is chosen based on the clear height under the shade and the diameter of the room, not on its design alone. For a reading corner, a living room floor lamp and a living room wall light are often enough. The full catalogue remains available in all the home lighting families, including LED chandeliers and designer pendant lights.

Secure payment, tracked delivery, returns and Designix customer service: all four points are covered from click to installation. If you are hesitating between two strip sections or two white temperatures, describe the room and the surface to customer service before ordering.

Frequently asked questions about LED neon flex

Is it possible to replace a neon with an LED?

Yes. A glass neon tube is replaced by a flexible LED neon or an LED tube of compatible length, by removing the old ballast and connecting the power supply suited to the new product. The continuous line rendering is preserved, without the fragile glass or the weight of the original tube.

Do you need a transformer for a flexible LED neon?

A 12V or 24V model must work with a dedicated power supply, supplied in a kit or separately. A 230V model connects to the mains without a transformer. In both cases, the power supply must remain accessible for maintenance and protected from water.

Can a flexible LED neon be installed in a bathroom?

Yes, provided you choose a model whose protection rating matches the zone, with IP65 covering water splashes around a mirror or a cabinet. The power supply unit, often less protected than the strip, is placed out of reach of splashes.

Does a flexible LED neon heat up?

The LED heats up little on the surface, but heat accumulates when the strip is enclosed or placed on insulation. It is fixed to a surface that lets the sheath breathe, coils are avoided and the power supply is kept in a ventilated place.

Which LED lamp can replace a neon tube?

A flexible LED neon or an LED tube whose length and housing match the existing surface. Check the supply voltage, the housing diameter and the protection rating before choosing, then entrust the mains connection to a professional.

Our advice for choosing
The flexible LED neon is a pliable light strip that draws a continuous line of light across a wall, ceiling or piece of furniture, with no visible hot spots. This collection brings together the voltages, diameters, colours and protection ratings to compare before choosing.