LED table lamps for bathrooms
This selection is also available in our French store: Lampes à poser LED pour salle de bain
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Start with a lamp designed for damp rooms, with the protection rating stated on the product page, then pick a size that fits on the edge of the vanity unit or on a shelf. The light comes next, depending on what you need it for: seeing yourself in the morning, getting ready, or simply lighting a corner in the evening.
Which LED bathroom lamp should you choose for a bathroom?
Start with the use, not the style: seeing yourself in the mirror, getting ready, or lighting a corner without glare. Three filters are then enough to decide: moisture protection, the size that fits on the unit, and the colour of light.
The basics, from plug to diffuser
An LED bathroom lamp plugs into a socket, with no wiring changes and no drilling: that is what makes it so easy to add to a wet room. The light source matters as much as the body of the fitting: an integrated LED cannot be replaced, while a model with a socket lets you choose the bulb and its colour temperature. The diffuser decides comfort: opal glass or a fabric shade softens the light and prevents glare when you look up towards the mirror. Finally, check the footprint of the base, because a wide base will not fit on a ten-centimetre shelf.
What a design lamp changes
Shape and finish matter more than you would think once the lamp is switched on: a curved base in matt ceramic reflects a soft light, a metal stem reflects a sharper one. If you are looking for a piece that is as much to be seen as it is to light the room, go for a design LED bathroom lamp, and for a design white finish to suit a pale vanity unit.
Can an LED bathroom lamp stay in a damp room?
Yes, provided you read the protection rating on the product page and keep the fitting out of direct splashes. Placed on a shelf or a ledge away from the shower, a lamp stays in a far less exposed zone than a fixed point above the bath. Avoid moving it with wet hands.
What the protection rating changes
The first digit of the rating covers dust, the second covers water: for a bathroom, the second is the one that counts. As a general guide, a rating whose second digit is 4 indicates protection against splashes, which covers most of a wet room outside direct spraying. The closer you get to the bath or shower tray, the higher this rating needs to be. The exact value for a model is given on its product page, never in a mood description.
Mistakes to avoid near the shower
Three mistakes come up again and again: placing the lamp on the very edge of the shower tray, letting the cable run across a floor that gets wet, and choosing a model with a wide slot that traps moisture. A fitting whose diffuser can be angled is better than a fixed model in the wrong place: models that can be angled towards the mirror direct the beam without moving the base.
Where should you place an LED bathroom lamp in the bathroom?
On the vanity unit to light the face, on a corner shelf as extra light, on the edge of the bath for a low ambient glow. Keep it away from splash zones and keep the socket within reach, with no extension lead running across a wet floor.
| Area | Main use | Recommended size | What to watch |
|---|---|---|---|
| Vanity unit | Seeing yourself, getting ready | Stable base, diffuser angled towards the face | Cable kept out of the water zone |
| Shelf near the mirror | Extra light | Compact size, discreet cable | Read the protection rating on the product page |
| Edge of the bath | Low ambient light | Stable model, no floor-level socket | Keep away from direct splashes |
| Toilet and small spaces | Spot lighting | Small shelf lamp | Low-glare light |
| Corner or decorative shelf | Ambience | Free shape, warm material | Socket within reach, no extension lead |
Around the vanity unit and mirror
Eye level gives you the reference point: the top of the diffuser usually sits at or just below eye level, so it does not light from above. On a narrow vanity top, choose a slim base, and complete it if needed with another light source in the home, such as all the lights in the home grouped by room.
Near the bath and the toilet
In the toilet, a small ceramic bedside lamp on a shelf is enough and stays out of the way. Near the bath, the lamp provides ambience, not reading light: keep it low, stable and away from the jet.
What light do you need to get ready in front of the mirror?
A neutral white renders colours accurately for make-up and shaving, while a warm white relaxes the mood in the evening. Position matters as much as colour temperature: the light comes from the side of the face, never from behind, otherwise the mirror casts a shadow on your chin.
| Light colour | Indicative reference | What it gives | Where it suits |
|---|---|---|---|
| Warm white | around 2,700 to 3,000 K | Golden light, soft mood | Bath, evening, extra light |
| Neutral white | around 4,000 K | Accurate colours, crisp rendering | Mirror, make-up, shaving |
| Cool white | above 5,000 K | Bright, direct light | Room without a window, functional use |
Warm white or neutral white
In a bathroom without a window, neutral white often becomes the main light of the room: it avoids the feeling of gloom and lets you check a foundation shade. Warm white is kept for evening extra light, when you want to lower the mood rather than see clearly.
Avoiding shadows
Two lamps are better than one big one: one on each side of the mirror removes shadows from the nose and cheekbones. If you only have one point, place it on the side of the hand holding the razor. A little shine helps too, which is where crystal versions placed near the glass come in.
How do you connect several lamps to a single power outlet?
Spread the lamps across a socket block or a power strip rather than stacking adapters, keep cables off the wet floor and avoid plugging several devices into the same extension lead. Each lamp stays on a socket close to where it is used.
Power strip or dedicated socket
A good-quality power strip, with a switch and a flexible cord, is useful when sockets are scarce. A dedicated socket for each lamp remains the cleanest solution: it avoids a tangle of cables behind the unit and makes cleaning easier. None of this requires any work, as bathroom lamps simply use the existing wiring.
What to check before plugging in
Check the power rating on each fitting's product page, the length of the cord, and whether there is a switch on the cord or the base, which is handy in a room you enter with your hands full. If you are completing the room's lighting, start from our selection of lights rather than adding at random.
How do you match an LED bathroom lamp with the room's decor?
Pick up the material and tone already present around the vanity: ceramic and wood for a soft interior, metal and glass for a crisper look. A lamp from the same family as the rest of the home gives visual continuity, right through to the next room.
Ceramic, wood, glass or metal
Matt ceramic goes well with a stone top and ages well with a simple cloth. Wood warms up a room tiled from floor to ceiling. Black metal suits contemporary taps, while glass and crystal reflect light and lighten a solid unit. Ceramic bathroom lamps and design wood cover the two most popular moods.
Creating continuity with adjoining rooms
In a kitchen open to the dining area, the bathroom lamp can be seen from the table: staying within the same family of materials gives a coherent modern kitchen decor from one unit to the next. A linen shade or a gold and black finish creates that thread between rooms, and also serves the kitchen decoration if the worktop is visible.
Powerful LED wall light or bathroom lamp: which should you choose?
A wall light is fixed to the wall and frees up the surface of the unit, while a bathroom lamp can be moved and requires no drilling. In a bathroom, the wall light suits above the mirror, the bathroom lamp suits a shelf or a ledge, and the two work very well together.
What the wall light brings above the mirror
Once fixed, it lights a wide area and no longer moves: it is the main light for a double vanity unit. It requires a wall power point and drilling, two real constraints when renting or on a newly tiled wall.
What the bathroom lamp adds
It moves house with you, slips onto a shelf and lets you change the mood without an electrician. As extra light, it lights the side of the face that the wall light leaves in shadow. To carry this principle through the rest of the home, see the design bedside lamp and how to continue in the bedroom.
How do you install and care for a bathroom lamp?
Place the lamp on a stable, dry surface, run the cable along the wall rather than across the floor, and wipe the diffuser with a soft, non-wet cloth. No work needed: the socket and the placement are enough.
Installation without any work
Check that the unit does not tip, that the cord is not taut and that the socket stays accessible without removing the lamp. A cable secured with a discreet cable clip along the upright stops it trailing in water. For another room, the same principle applies in the living room.
Everyday cleaning
A soft cloth on the base, glass cleaner only on the glass, never water on the bulb holder or the cable. Limescale on a diffuser dulls the light: regular wiping is enough to keep it clear.
Secure payment, tracked delivery, returns and Designix customer service: order with confidence, and the team will answer if you are still unsure about the size or the colour of light.
Frequently asked questions
Which light for a toilet?
In a toilet, a small lamp on a shelf or unit is enough, with low-glare light and a cable kept out of the way. Read the protection rating on the product page and keep the socket accessible, with no extension lead running across the floor.
Design LED bathroom lamps: which styles?
Design models play on the shape of the base, the material and the finish: matt ceramic, black metal, pale wood, glass or linen. In a bathroom, choose a compact size and a tone that picks up the colour of the unit or the taps, for a coherent look.
Does an LED bathroom lamp use a lot of electricity?
An LED bathroom lamp uses far less than a halogen lamp of the same light output, and gives off little heat. Actual consumption depends on the power rating on the product page and on how many hours it is switched on; there is no point leaving it on during the day.
Can you place a bathroom lamp in a bathroom without a window?
Yes: without a window, the bathroom lamp often becomes the main light. Choose a neutral white so you can see properly, a stable model that will not tip on a narrow shelf, and light directed towards the worktop or the mirror rather than towards the ceiling.
How do you connect several lamps to a single power outlet?
Spread the lamps across a socket block or a power strip rather than stacking adapters, keep cables off the wet floor and avoid several devices on the same extension lead. Each lamp stays on a socket close to where it is used.





