Kitchen strip light

Mount the strip under the wall cabinet, as close to the front as possible, and cover the full usable length of the worktop: this is what removes the shadow cast by your body and lights the prep area. Then choose the model on three points: length, mounting type and light colour.

What is a kitchen strip light and what is it for?

A kitchen strip light is a linear fixture fixed under the wall cabinets that lights the worktop and the splashback. It replaces the shadow cast by your body with direct light on the prep area, without glare. It is added alongside the ceiling light, chandelier or pendant in the room, never instead of them.

LED kitchen strip light: what it changes on the worktop

The effect is easy to measure: without a source under the cabinet, ceiling light comes from behind you and leaves a dark band in front of your hands. An LED kitchen strip light brings back relief to food, renders colours accurately on the chopping board and erases the shadow of the cabinet. The LED strip switches on with no warm-up time, which matters when you wash your hands or chop for two minutes.

Kitchen strip light fixture: under the wall cabinets or elsewhere?

Its natural place is under the wall cabinet, above the worktop. A kitchen strip light fixture can also run along a splashback, light a niche or highlight an open shelf. To equip several cabinets at once, a complete worktop lighting set saves you from multiplying power supplies. If the room needs several light points, compare with the ready-to-install lighting kits.

How do you light the worktop with an LED strip light?

The strip is fixed under the wall cabinet, as close to the front as possible, to send light towards the back of the worktop. Set back, it mainly lights the splashback; moved forward, it lights the prep area. Better to cover the full usable length than just the centre.

Kitchen cabinet strip light: where to fix it on the wall cabinet

A kitchen cabinet strip light placed a few centimetres from the front edge sends a clear cone of light onto the worktop. Pushed back against the rear, it becomes splashback lighting and leaves your hands in shadow. The right setting shows in use: no more glare on the worktop, no more dark zone in front of the hob.

Kitchen strip light: length, position, cast shadows

Measure the actual length of the cabinet, not the width of the worktop: that is what determines the strip. For an L-shaped worktop, two lengths or a made-to-measure model ensure continuous light, with a clean joint in the corner. A motion sensor or dimmer remains useful if you want to switch on with one gesture when your hands are busy. For the remaining metres, the lighting rail for several light points takes over.

Cordless kitchen strip light: for which setups?

A cordless strip light runs on a rechargeable battery and installs without an electrician, using adhesive or magnetic mounting. It suits kitchens with no socket under the cabinets, rentals and isolated worktops. You have to accept recharging it regularly and taking it down to do so.

Cordless kitchen strip light: what it allows and what it requires

The cordless kitchen strip light solves a concrete problem: no channelling, no cable to pull, no socket to create behind the cabinet. In a rental, it comes off without leaving a trace if the mounting is adhesive. In return, it requires a recharging routine and an intensity that drops as the battery nears empty.

Battery life, charging and switch: the points to check

Look at the charging method before buying, USB plug or dock, and how the strip unclips: that is what will decide your patience. Also check the type of switch, button on the fixture or sensor, and the weight the adhesive supports. If the wiring is already in place, a wired strip light remains simpler day to day, see the full lighting collection.

Kitchen chandelier or kitchen ceiling light: how to choose?

The kitchen chandelier provides general light and decoration, and suits rooms with a table. The kitchen ceiling light, flatter, wins on small surfaces and low ceilings. In both cases, the light must be diffused to avoid glare and complement the worktop strip light.

Modern kitchen chandelier: what matters above a table

A table is marked with a modern kitchen chandelier if the shade lets light out without showing the bulb: diffusion decides comfort, not the design. The suspension height matters as much as the diameter, and a kitchen chandelier that lights well is the one that lights the table without dazzling seated faces.

Trendy kitchen ceiling light: diameter and height

A trendy kitchen ceiling light is chosen from the ceiling and the surface area, not from fashion. A model that is too wide crushes a small kitchen, one that is too flat disappears under a high ceiling. For the general light of the home, widen the comparison with all our lights room by room.

Which kitchen pendant to choose above an island?

Above an island, the kitchen pendant aligns with the worktop, high enough not to block the view and low enough to mark the zone. A single large pendant suits a short island, several small ones a long island. The light must go down to the worktop, not to the eyes.

Modern kitchen island pendant: height and alignment

A modern kitchen island pendant is adjusted on site, once the worktop is known: you look for the height where you do not bump into it while working, without losing the visual link with the worktop. On a long island, the light points align and are spaced regularly. For three sources or more, lighting an island on a rail simplifies adjustment, with the rails for pendants and spotlights.

To complete the lighting, plan for spotlights: an under-cabinet spotlight lights the worktop, an adjustable spotlight on a rail is aimed at the useful zone, a recessed spotlight above the worktop brings uniform light.

Italian design kitchen pendant or original kitchen pendant: the style

The Italian design kitchen pendant works on finesse: fine line, often integrated source, simple shapes and understated materials, for a discreet pendant that structures the island without cluttering it. The original kitchen pendant plays the opposite, marked shapes and materials, to be reserved for a room that can carry it. A complete set for the island can be found in the available lighting kits.

How do you match strip lights and modern kitchen decor?

A modern kitchen reads through its lines: the strip light underlines the worktop, the pendant marks the island, the ceiling light lights the rest. Keep the same light family, warm white or neutral white, to avoid a contrast that breaks the reading of the space and dates the decor.

Modern kitchen decor: lines, materials and colours

Modern kitchen decor relies on clean lines and few materials: a light worktop, a handleless wall cabinet, a discreet splashback. Light is part of that design, a hidden strip light underlines the splashback and leaves the worktop clean. That is where kitchen decoration is played out, in what remains visible when everything is switched off.

Modern kitchen decoration: matching the strip light to the chandelier and ceiling light

Modern kitchen decoration comes down to a simple rule: a single white family between strip light, pendant and ceiling light, otherwise the space splits into uneven zones. A neutral white around 4000 K renders colours accurately on the worktop, a warm white around 2700 to 3000 K warms the table. Cool white, harsher, turns food blue and suits a living kitchen poorly. A fixture suited to each use can be found by browsing the lighting catalogue.

WC lighting: which light and which fixture?

In the WC, lighting must be clear but not dazzling: a diffused ceiling light is enough in a room without a window, a wall light near the mirror helps at the basin. A strip light suits above a cabinet or a niche. Avoid light that is too white and sources that are directly visible.

WC lighting: strip light, wall light or ceiling light?

The diffused ceiling light covers the whole room, the wall light handles the face and hands in front of the mirror, the strip light lights a precise surface above a cabinet. In a small room, one of these sources is often enough. In a damp WC, an IP44 protection rating covers splashes, with IP20 kept for dry zones.

WC lighting without a window: avoiding glare and shadow

Without a window, the source must never fall in the line of sight: look for a diffuser, not a bare bulb, and avoid white that is too cool, which hardens the room. A warm or neutral light makes the space more bearable, including at night. To extend the home, the home's outdoor lighting follows the same logic.

Which mistakes should you avoid in kitchen lighting?

The most frequent mistakes: a strip light set too far back that leaves the worktop in shadow, light that is too white and turns food blue, visible sources that glare, and the absence of a socket or transformer planned before installation. These points are checked before ordering.

Reflections, cast shadows and glare on the worktop

A glossy worktop bounces the source back: a strip light without a diffuser creates a band of reflection that tires the eyes. A model with a diffuser, placed near the front of the cabinet, lights the prep area without throwing light back into your eyes. Also check the result on the splashback, that is where shadows show most.

Wiring, sockets and transformers: to check before buying

Locate the available socket, the space for a transformer under the cabinet and the cable route before ordering. Without a socket, the rechargeable solution avoids works. With a socket, a wired strip light remains simpler to live with. For the rest of the project, the kits to equip several cabinets and, for the terrace, a kit to light the terrace complete the set.

Before confirming, measure the length of the cabinet, note the desired white colour and choose the mounting. Secure payment, tracked delivery, returns and Designix customer service support you through to installation. To extend the light outside, see how to extend light to the terrace and the outdoor lighting kits.

Frequently asked questions