Kitchen fluorescent light fixture
This selection is also available in our French store: Réglette néon cuisine
No products in this selection.
- Tracked delivery to your country Tracked delivery
- Secure payment at checkout Multiple payment methods
- 14 days to change your mind 14-day returns
- Secure payment Secure payment
Not sure of your style? Find it in 30 seconds
A few questions, and we will show you the pieces made for you.
Frequently asked questions
How do I choose the right product?
What are the delivery times?
Can I return an item?
Can I pay in instalments?

An interior that reflects who you are
Carefully selected pieces, shipped from our warehouses. Our team advises you before you buy, so you choose with confidence.
- Tracked delivery
- Pay in instalments, where available
- 14 days to change your mind
- Advice & showroom in Lyon, France
Fix the strip under the wall cabinet, directly above the worktop, with a length matched to the width of the cabinet: this is the move that removes the shadow of your hands on the cutting board. A slim profile, white or aluminium, stays discreet under the cabinet and blends with the splashback or a white kitchen.
Which kitchen neon strip light best illuminates a worktop?
The light should fall on the food and your hands, not behind you. A strip fixed under the wall cabinet, slightly set back from the front edge, lights the cutting area without casting your shadow on the worktop. The rest comes down to three choices: the length, the slimness of the profile and the colour of the light.
Kitchen LED strip under cabinet: where to fix it to light the cutting area?
Allow about ten centimetres of setback from the wall, across the full usable width of the wall cabinet. Closer to the front edge, the light shines towards your eyes; stuck to the wall, it does not reach the cutting area. The complete solution is in all our LED strips, to be chosen according to the space available under the cabinet.
Kitchen light strip: what length for a worktop?
A strip covering two thirds of the cabinet width already lights the preparation area; on a continuous worktop, two aligned strips are better than a single long profile that is badly centred. A motion sensor saves you hunting for the switch with your hands full, see automatic switching on when you pass.
Is it possible to replace a neon tube with an LED tube?
Yes, in most cases: a neon tube is replaced by an LED tube of the same length and the same cap. Switching on becomes immediate, with no flickering or warm-up time, and the light stays stable above the worktop. What remains is to check the fitting's power supply before dismantling.
Ballast and cap: what to check before replacing a neon tube
Note the cap (T8 or T5 most often), the exact length and whether the fitting contains a ballast. Many LED tubes have their own power supply and require the ballast to be removed or bypassed; others work as a direct replacement. On an old or doubtful fitting, have the connection checked by an electrician.
Neon tube or LED tube: what result in a kitchen?
The LED tube gives the same regular linear light, without the perceptible flicker of ageing tubes, and a neutral version is the one to choose for cooking. For a kitchen already fitted with neon, replacing the tubes is often enough; for a new installation, go directly for mains-powered 220V models.
Cordless or switched kitchen LED strip: which to choose?
The choice comes down to a daily gesture: recharging a strip installed without a cable when no socket reaches under the cabinet, or pressing an accessible switch when the wiring is already there. The two solutions coexist very well in the same kitchen.
Cordless kitchen LED strip: when to prefer it?
It is fitted with adhesive or screws, without running a cable, and is recharged depending on the model. It is the solution for an isolated wall cabinet, a rental or a later addition. For everyday cooking, aim for a neutral light and a length that covers the cutting area: rechargeable cordless strips recharge without removing the profile.
Switched kitchen LED strip: the everyday gesture
A switch placed on the side of the wall cabinet, at hand height, can be operated without looking and without taking your eyes off the worktop. Avoid placing it behind a deep worktop or in the sink splash zone. A mains-powered sensor model combines both approaches: the mains-powered motion sensor.
Where to install a light strip in the kitchen?
Under the wall cabinet, in the splashback, above the sink and along a plinth, the strip does precise work. The island and the table need another light fitting, lower and wider, to light faces and a surface, not just an edge.
Kitchen light strip: under the cabinet or in the splashback?
Under the cabinet, it lights the worktop; in the splashback, it highlights the material and provides extra light above the upstand. Near the sink, steam and splashes require a reinforced protection rating, around IP44 or higher depending on exposure: see the wall strip to install in the splashback and a waterproof strip for damp rooms.
Plinth and under-cabinet: where the light really matters
A low strip stops you walking in the dark at floor level and highlights a wall-hung cabinet. Fix it outside the kick zone, set back a few centimetres, so it receives neither shoes nor broom. For the outside of a covered terrace, switch to models protected to IP65.
| Location | Type of strip | Power supply | Point to check |
|---|---|---|---|
| Under the wall cabinet, above the worktop | Slim under-cabinet LED strip | 220V mains or rechargeable | Cabinet length and cable routing |
| Splashback and upstand | Flat strip or wall strip | Mains | Protection rating near the sink |
| Plinth and base of cabinet | Low strip | Mains | Fix outside the kick zone |
| Central island | Pendant or ceiling light, the strip alone is not enough | Mains | Clear height and alignment of the lights |
| Terrace or open extension | IP65 waterproof strip | Mains | Protection rating and exposure to weather |
Ceiling light or kitchen chandelier: how to light the centre of the room?
The ceiling light illuminates the whole room with a diffuse light without cluttering the passage; the chandelier brings a visible presence and is justified above a table or a clear island. Do you need a chandelier or a ceiling light above the table? A ceiling light is enough when the table stays in the general flow; a chandelier is preferred over an isolated table, with a low light point that illuminates faces.
Trendy kitchen ceiling light: what light in the centre of the room?
Aim for a homogeneous light that does not create a dark zone between the wall cabinets, leaving the strip to do the precision work on the worktop. A low, wide ceiling light suits a small kitchen; in a large room, add other points. The rest of the catalogue can be browsed in the Designix lighting catalogue.
Kitchen chandelier that lights well: what to look for
A chandelier that lights well hangs low enough to mark the light point, without ever entering the field of vision of a seated person. Look at the clear height above the table, the downward opening of the fitting and how easy it is to clean. An industrial kitchen chandelier has more presence than a blown-glass model.
Kitchen pendant: above the island or the table?
A pendant is placed above an island or a table, high enough not to obstruct the view, low enough to light the surface. On a long island, several are aligned keeping the same line as the wall cabinets, otherwise the eye immediately sees the misalignment.
Modern kitchen island pendant: how to align it?
Take the plumb line of the centre of the island, then distribute the points at regular intervals, keeping a margin on each side. For a long island, two or three pendants are better than a single one placed in the middle. The full range can be found in our selection of light fittings and is completed by the models designed for the workshop when the room also serves as a DIY corner.
Italian design kitchen pendant or original kitchen pendant: which style to choose?
Italian design relies on simple shapes, fine lines and understated materials: it stands the test of time and suits a white kitchen. An original pendant, more sculptural, is reserved for a clear island where it becomes the focal point. A white kitchen accepts both, provided you keep a single statement piece.
| Solution | Where it is placed | What it lights | When to prefer it |
|---|---|---|---|
| Under-cabinet strip | Under the wall cabinet | Worktop and cutting area | Cooking without shadows on your hands |
| Ceiling light | Centre of the ceiling | The whole room, diffuse light | Small kitchen or passage area |
| Chandelier | Above the table | Table and faces | Wanting a visible decorative light |
| Pendant | Above the island or the table | Island surface | Clear island with sufficient height |
| Sensor strip | Circulation, cupboard, plinth | Occasional passage | Automatic switching on with hands full |
How to match strips and modern kitchen decoration?
The light is chosen after the worktop and the splashback, never before. A slim profile goes unnoticed on a wood or stone worktop; white and aluminium blend under light wall cabinets, while a profile that is too visible breaks the line of the splashback.
Modern kitchen decor: place the light before choosing the colours
Modern kitchen decor is built on two layers: a neutral work light on the worktop, a warmer dining light above the table. Until these two levels are in place, cabinet and splashback colours are decided blind. A matt worktop reflects light gently, a polished worktop reflects it sharply.
Kitchen decoration: matching strips, ceiling light and pendant
Kitchen decoration benefits from staying consistent on a single detail, the colour of the light fitting: white everywhere in a white kitchen, aluminium on a grey or steel worktop. Mixing three different finishes under the wall cabinets blurs the reading. A neutral light, around 4000 K, suits preparation; a warmer light, around 3000 K, warms the table.
How to install and maintain a kitchen neon strip light?
Fixing with screws or adhesive tape depending on the profile, connection to the mains or recharging, cutting the power before any intervention: three simple steps, in that order. Maintenance comes down to one regular gesture, dusting the diffuser.
220V kitchen LED strip: fixing and connecting without mistakes
First locate the cable route under the wall cabinet, then offer up the strip dry before drilling. A 220V supply with a wall switch suits a light switched on every day, with no recharging to plan. Cut the power at the consumer unit before connecting, and check the available length before choosing.
Maintaining the diffuser of a kitchen strip
A dusty diffuser loses light without you noticing, especially above a hob. Wipe it with a soft dry cloth once a month, without abrasive products on an aluminium profile. For outdoor or very damp use, compare the waterproof range and outdoor strips.
Now compare lengths and power supplies: 220V LED strips, rechargeable models, bathroom lighting for adjacent damp rooms, and waterproof outdoor versions if the kitchen opens onto a terrace. Unsure about the length before ordering? The Designix customer service answers before purchase.
Before drilling, measure the free length under the wall cabinet and check the location of the power supply: the order is then placed according to these measurements.
Frequently asked questions about the kitchen neon strip light
Where can I find LED strips?
At Designix, in the dedicated collections: under-cabinet strips, waterproof strips, rechargeable or motion sensor models. For a first choice, customer service helps you decide between cordless, switched and 220V depending on the location and whether there is a socket under the wall cabinet.
Cordless kitchen LED strip: is it bright enough for cooking?
Yes as a complement to the ceiling light, provided you aim for a neutral light and cover the whole cutting area. The cordless version is mainly suited to cabinets without a nearby socket; for intensive use, a mains-powered model avoids the question of recharging.
Switched kitchen LED strip: where to place the button?
As close as possible to the worktop, on the side of the wall cabinet or under the strip, where your hand naturally passes when cooking. Avoid placing it behind a deep worktop or in the splash zone, near the sink.
Can a kitchen light strip be installed near the sink?
Yes, by checking the protection rating and keeping it away from direct splashes. The splashback receives water and steam: a model protected against damp lasts better over time than a bare strip.
Kitchen neon strip light: what colour of light to choose?
A neutral light for the cutting and preparation area, a warmer light for the table and meals. A white kitchen supports a neutral light, a wood worktop is warmed by a softer light. Ideally, match the strip to the rest of the room.





